Windrider EPO Fox to Swit S-1 conversion - RC Groups
Shop our Airplanes Products Drone Products Sales
Thread Tools
Mar 06, 2011, 03:29 AM
Registered User

Windrider EPO Fox to Swit S-1 conversion

Inspired by a message in the Windrider Fox build thread, I decided to convert my EPO Fox into a Swift S-1.
1, Cut off the fin and make a new Swift S-1 fin and rudder.
2, Cut off the wing tip and make it sqare.
3, Cut off the stab at the tip and also make it square.
4, Cut off the wheel well and fill with foam and spackle.
5, Fill the rear canopy window with spackle.
Now I am waiting for maiden.
Thanks are due for those who helped acquiring Swift S-1 logo.

Now back to B737.
Sign up now
to remove ads between posts
Mar 06, 2011, 08:35 AM
Ming's Avatar

Mar 06, 2011, 07:13 PM
Registered User
JosePain's Avatar
Very Cool ... so much potential with the Fox base ..go for it Ming ..!
Mar 06, 2011, 11:00 PM
Registered User
It IS Semi-scale. So, a new tail section, a new canopy and a sticker to mask the rear canopy is all thats needed for a simple conversion kit. Yes, Ming, such conversion kit would be nice.
Mar 10, 2011, 07:02 AM
Registered User

Successful maiden!

Yep, she flew. And she flew nice. The wind gods were not so cooperative, unfortunately, because every five minutes or so, the lift died. But I was able to wring her out and check out her performance.
Tissue and WBPU really added to the flight characteristics and performance by making the wing rigid. Converted Swift did nice rolls and loops. Something my first Windrider EPP Fox, which was built stock without covering, had a hard time doing. Wing was too flexible.
A keeper for sure.
Thanks are due to Takahashi-san of R/C Technique magazine for taking these photos. Now I gotta finish my conversion article for them. Fun never stops.
Mar 11, 2011, 11:27 PM
Registered User
The massive quake yesterday took a minor toll. A vase fell on the stab of the Swift. No other damage. My self as well as my family are all safe and well. Now every member of the family have a story to tell about yesterday. How we made contact to each other and how we made it back home. I drove 6 hours to get home when it usually takes an hour or so.
I am worried about the safety of my friends and their family in Tohoku region which was hit hard by Tsunami.
From Tokyo.
Apr 14, 2011, 06:56 PM
Registered User
Burned the midnight oil and completed a conversion artilcle. Sent it to R/C Technique magazine. Draft is 4 pages with 18 photos. Hope they'll print it soon.
Apr 14, 2011, 06:58 PM
Registered User
JosePain's Avatar
Very good .. congratulations.

Sep 12, 2011, 10:28 AM
Registered User
My article became print. Four pages in R/C Technique magazine.
Sep 12, 2011, 01:56 PM
Registered User
JosePain's Avatar
Sep 12, 2011, 07:19 PM
Registered User
Here ya go. In few months, I will bcome slightly rich, barely making up for the investment I made for the kit, radio gear and paint. Yeah, water based rattle can spray aint cheap.

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion HobbyKing Fox EPO Glider 2.32M DougKierc Electric Sailplanes 2318 Aug 28, 2017 03:17 AM
Mini-Review FOX ST-Model /Kyosho /Hype /Ripmax 1.8m /71" EPO PnP/RTF BL/ Glider McMoron Electric Sailplanes 428 Dec 03, 2015 02:43 AM
Sold EPO Windrider Dauntless SBD 42 inch Scale Dive Bomber rudderbud2000 Aircraft - Electric - Airplanes (FS/W) 3 Feb 18, 2011 03:01 PM
Discussion Windrider Fox as an FPV ship? Thepasty FPV Talk 17 Nov 07, 2010 04:28 PM
Alert Windrider Xmas Sale! Windrider FOX EPP $70 + FREE SHIPPING!!! Doubletap Slope 2 Dec 01, 2008 06:01 PM