Thread Tools
Old Dec 22, 2011, 03:58 PM
Meatball is offline
Find More Posts by Meatball
Registered User
Meatball's Avatar

Wing Progress


I managed to finish the wings today. Super easy to build, now I just have to sand in the Dihedrle angle and join the 2 halves.

Randy
Sign up now
to remove ads between posts
Old Dec 22, 2011, 11:35 PM
Meatball is offline
Find More Posts by Meatball
Registered User
Meatball's Avatar

More Progress


I started framing up the fuselage today. I always leave the bottom sheeting off until I get the controls installed. I also am awaiting my motor before I can install the motor mount. I want to get the distances just right, so I won't be able to do much more for awhile!!

Randy
Old Dec 23, 2011, 08:25 AM
bracketman is offline
Find More Posts by bracketman
Registered User
Motors

You might want to try these guys, they have suggestions on motors based on plane weight and props with the amount of amps they pull. I have used them a few times and they ship fast. Shipping is only $2.

http://www.headsuprc.com/servlet/StoreFront

Meatball you should start a build thread.
Old Dec 23, 2011, 06:24 PM
Meatball is offline
Find More Posts by Meatball
Registered User
Meatball's Avatar

Pronto Motor


My motor has been shipped from Value Hobby. I am building the model like I would if I were going to use an OS Max 25 for power. My original was built that way and I want the new one to have the same flight characteristics. So I am doing nothing to save weight, just putting a strong enough motor in the plane. The motor I am waiting for is shown below!!

Randy

http://www.valuehobby.com/power-syst...42-1250kv.html
Old Dec 26, 2011, 04:10 PM
BanjoTX is offline
Find More Posts by BanjoTX
Registered User
BanjoTX's Avatar
Hi Randy....
Nice build on the Pronto....
Couple of points of interest... I noticed on the wing structure ya haven't included the spar webbing between the spars.. this is quite important as it prevent the wing from torquing... also another helpful area is at the trailing edge at the end of each wing panel.. here I normally add a triangular piece of material to help give added covering surface.. this is due to the intentional wash out that I put in to each trailing edge panel at the tips... this enables the pronto to fly at lower speeds and still have solid lift...

Hope this helps and I hope ya had a grand Christmas.. and and even greater new year..


Banjo







Quote:
Originally Posted by Meatball View Post
I managed to finish the wings today. Super easy to build, now I just have to sand in the Dihedral angle and join the 2 halves.

Randy
Old Dec 26, 2011, 08:15 PM
edalpoe is offline
Find More Posts by edalpoe
Registered User
Pronto #3 progress: A while back I said wood had been cut for my third Pronto so here's where I am currently. The wing is from #2 and mainly just got the top center sheeting replaced and then it was re-balanced. The fuselage is mostly per the plans but I'll be using a different motor mount and landing gear system than original design. It'll be a lot more robust than #1 and #2 as they both had 1/8 tail feathers along with 1/8 fuselage sides without any doublers. I've still got more stringers to add to the turtle deck to fill it out I know the original design had a shaped block for the turtle deck but I used the built up method on the earlier Prontos and wanted to stay with that approach, besides I eat less balsa dust this way.

Name: Pronto 3 Progress.jpg
Views: 128
Size: 139.0 KB
Description:

The bottom of the fuselage is wide open at this point. Time to start getting the servos installed and setting up control linkages. I'm looking forward to seeing how this one flies this spring.

Mark
Old Dec 26, 2011, 10:05 PM
Meatball is offline
Find More Posts by Meatball
Registered User
Meatball's Avatar

Thanks


Thanks for the input Banjo. I have completed the shear webs in the wings, just weren't complete when I took the picture. I will add the triangles at the end of each wing as suggested...

Randy
Old Dec 26, 2011, 11:51 PM
BanjoTX is offline
Find More Posts by BanjoTX
Registered User
BanjoTX's Avatar
Ya'll have to post finished photos.... Plus will be quite interested in how much she weights AUW.... As I'm seriosly considering building an E-version as well.

Enjoy my friend!!!

Banjo





Quote:
Originally Posted by Meatball View Post
Thanks for the input Banjo. I have completed the shear webs in the wings, just weren't complete when I took the picture. I will add the triangles at the end of each wing as suggested...

Randy
Old Dec 30, 2011, 11:21 PM
Meatball is offline
Find More Posts by Meatball
Registered User
Meatball's Avatar

Motor Mount


I received my motor and got the firewall and motor mounted to the fuselage. I also made the top hatch removable so I can get to the battery easier. The build is coming along.

Randy
Old Jan 02, 2012, 05:29 PM
Meatball is offline
Find More Posts by Meatball
Registered User
Meatball's Avatar

Dihedral Angle


How do you get 7 inches of Dihedral angle???? If you are an old Tool and Die Maker you use some type of fixture. This is what I came up with ... and it works!!!

Randy
Old Jan 02, 2012, 05:33 PM
Meatball is offline
Find More Posts by Meatball
Registered User
Meatball's Avatar

OOPS Wrong Picture


Sorry about that!!

R
Old Jan 02, 2012, 05:38 PM
Meatball is offline
Find More Posts by Meatball
Registered User
Meatball's Avatar

Second Try


Having a little trouble downloading my pictures.

R
Old Jan 02, 2012, 06:02 PM
BanjoTX is offline
Find More Posts by BanjoTX
Registered User
BanjoTX's Avatar
Yuppers....
block up the tip 3".. and sand the dihedral into the panels.. Once both panels are done... just apply epoxy and clap both panels together...
Works for me....

Banjo



Quote:
Originally Posted by Meatball View Post
Having a little trouble downloading my pictures.

R
Old Jan 04, 2012, 08:37 PM
Meatball is offline
Find More Posts by Meatball
Registered User
Meatball's Avatar

Ribs


Anyone need Pronto Ribs??? Just make 2 ply ribs joined with a couple bolts and place balsa in between. Easy to sand to shape!! I made all the ribs needed to build the pronto using the 2 Ply patterns ...EASY

Randy
Old Jan 04, 2012, 10:25 PM
bracketman is offline
Find More Posts by bracketman
Registered User
Meatball I thought you would have been flying that thing by now!!


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion The Continuing Saga of the Houston Hawk - It's still competitive lktroiani Thermal 171 Jun 03, 2011 01:37 PM
Off Site Cheap Legend and engine jim breese Aircraft - Fuel - Helis (FS/W) 0 Oct 15, 2010 02:26 PM
Discussion Bolink Nitro Legend fargophil Nitro and Glow Power Cars 1 Sep 19, 2010 01:45 PM
Question Jet Legend f-16 (1/8) turbine? scabard Jet Turbines 4 Sep 07, 2010 08:29 PM