Lumenier RB2205C-12 2400KV SKITZO Ceramic Bearing Motor
Thread Tools
Old Jan 06, 2012, 12:15 PM
satinet is offline
Find More Posts by satinet
F3B
satinet's Avatar
the prices are on the f3x.eu website.
you might see one before too long
Sign up now
to remove ads between posts
Old Jan 06, 2012, 12:21 PM
ceres-syd is offline
Find More Posts by ceres-syd
Registered User
quality stuff and wouldn't mind one myself
Old Jan 11, 2012, 06:20 PM
gunga100 is offline
Find More Posts by gunga100
Gunga
gunga100's Avatar
Great to see pictures of your stinger Kjell. I was thinking of a square or rectangular ballast tube for the fuse too

Hope we get a flight report soon.
Peter
Old Jan 12, 2012, 03:57 AM
SpeedMaster is offline
Find More Posts by SpeedMaster
UAS Test Pilot
SpeedMaster's Avatar
Hi Peter,

I`m hoping to maiden mine in March sometime, there is not much daylight up here for the moment. When are you receiving yours?

Kjell.
Old Jan 12, 2012, 10:12 AM
ceres-syd is offline
Find More Posts by ceres-syd
Registered User
I have found some nice brass square section in my garage in an old box that was my Fathers.
Looks very grubby, but weights around 800g.
Looking at my ascot I could get around half of this in a tube running from the end of the servo tray to just about the trailing edge of the wing.
You guys have me thinking.
Jon
Old Jan 12, 2012, 04:19 PM
Zimodile is offline
Find More Posts by Zimodile
Registered User
Great job with the Stinger. VV nice.

Z
Old Jan 13, 2012, 04:39 PM
gunga100 is offline
Find More Posts by gunga100
Gunga
gunga100's Avatar
Mine is due towards the end of March.
I loved my Ascot and couldn't resist a Stinger it really does look promising and you know the build is going to be good.
Just a standard double carbon lay up and no RDS for me though, your lay up looks like it would be good for anything!
Old Jan 13, 2012, 07:01 PM
Greg Dakin is offline
Find More Posts by Greg Dakin
Registered User
Wow, that's a superb looking model you have there Speedmaster, I'm envious. Congrats to Gunga too, I didn't realise that you had one of these beasts on order Pete...coming to a HoH event very soon I trust?

Cheers
Greg
Old Jan 14, 2012, 03:09 PM
Zimodile is offline
Find More Posts by Zimodile
Registered User
Dya know lads, one of my GREAT pleasures in life is when a new F3x mouldie comes out, and I then get to debate the pros and cons to the new design features/ unique design logic displayed by each new one with myself. Even better when I get to debate it with a fellow detail freak (step forward Greg and Mark LOL!)

And I have to say, I really am especially an admirer of this particular one. It's hard to resist despite my new policy! I really hope 2012 goes well professionally! There's so much I'd LOVE to get my hands on!!!

Z
Old Jan 15, 2012, 04:28 PM
ceres-syd is offline
Find More Posts by ceres-syd
Registered User
I had to read your post twice zim to be sure.
I thought that your said "There's so much LOVE I'd like to get my hands on !"
But after a re-read I realised what you said.

This Stinger and the Rotmilan are on my radar, but not discounting the Arsen or the Toxic either.

The Euro is going the right way for us chaps, we just need to hand on.
Old Jan 15, 2012, 05:03 PM
satinet is offline
Find More Posts by satinet
F3B
satinet's Avatar
Zim's already got his hand on....
Roll on March.......
Old Jan 16, 2012, 01:26 PM
ceres-syd is offline
Find More Posts by ceres-syd
Registered User
He is such a boy.
Old Mar 18, 2012, 04:42 AM
gunga100 is offline
Find More Posts by gunga100
Gunga
gunga100's Avatar
Quote:
Originally Posted by SpeedMaster View Post
I`m hoping to maiden mine in March sometime, there is not much daylight up here for the moment.
Hey Kjell

Have you had any conditions for a maiden yet?
It would be good to see some pictures of your install... and what size is the i.d. of the joiner / ballast cavties in the wing? Need to order some brass.
Questions, questions
Old Mar 19, 2012, 04:22 PM
SpeedMaster is offline
Find More Posts by SpeedMaster
UAS Test Pilot
SpeedMaster's Avatar
Quote:
Originally Posted by gunga100 View Post
Hey Kjell

Have you had any conditions for a maiden yet?
It would be good to see some pictures of your install... and what size is the i.d. of the joiner / ballast cavties in the wing? Need to order some brass.
Questions, questions

Hi Pete,

Not ready yet, to much work and travelling getting in the way. Maiden will be during the Easter. I`ll post pics when I manage to crawl out of bed and get my camera... sick with the flu at the moment...

Ballast is 6 pieces 10x9x170mm and 2 pieces 11x11x110mm. I also made a 10x10x400mm tube in the fuse.

Kjell.
Old Mar 21, 2012, 07:35 PM
gunga100 is offline
Find More Posts by gunga100
Gunga
gunga100's Avatar
Thanks for the ballast info. May need to squeeze a little more into the fuse if I can, aiming for about 1.6kg capacity...

Get well soon!


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion F3B & F3F rules on airfiol shape shifting! Sceptics welcome! Just flyy Multi Task F3X 21 Mar 21, 2011 06:35 AM
Alert F3B/F3F models for sale - UK Stephen Haley Multi Task F3X 6 Dec 12, 2010 07:32 AM
For Sale SOLD!!! Awesome SupersonicR F3B/F3F glider FLY F3B Aircraft - Sailplanes (FS/W) 14 Dec 07, 2010 06:32 PM
Sold F3F,F3B F3J servo gear concreteman Aircraft - Sailplanes (FS/W) 0 Oct 12, 2010 08:27 AM
Sold Boreas F3F/F3B + Wing Bags + Sailplane Backpacks Kai@UCSB Aircraft - Sailplanes (FS/W) 2 Sep 03, 2010 06:45 PM