Guardian stabilization module for your OSD Pro - $54.99! - Page 7 - RC Groups
Thread Tools
Apr 27, 2011, 11:04 PM
One with the machine
X--ALIEN--X's Avatar
Quote:
Originally Posted by EugeneFlorida
NO Buy Button Look for a Preorder Button
where?
Sign up now
to remove ads between posts
Apr 28, 2011, 06:20 AM
KJ4YYJ
EugeneFlorida's Avatar
Quote:
Originally Posted by X--ALIEN--X
where?
Where and When : That is the Question
see you at Pecan Patch
Apr 28, 2011, 07:42 AM
Registered User
hi all

i'm in the market for a OSD system.
I already have a FDR "glide" version.
Can i buy the OSD Pro + guardian modules? Or do i need the FDR pro, instead?
sorry for the silly question..
Apr 28, 2011, 09:20 PM
One with the machine
X--ALIEN--X's Avatar
Quote:
Originally Posted by EugeneFlorida
Where and When : That is the Question
see you at Pecan Patch
I see you there buddy
Apr 29, 2011, 12:48 PM
Oopss. Oh well.
borneobear's Avatar
It would be good if they could release the manual first. That would make clear the functions of the unit before purchase.
Apr 29, 2011, 02:01 PM
Registered User
Quote:
Originally Posted by borneobear
It would be good if they could release the manual first. That would make clear the functions of the unit before purchase.

I agree Im very interested in this one, it will release a lot of room in my Easy Glider, Im using fy20.
Apr 29, 2011, 05:29 PM
Fast and low...
aa78's Avatar
Quote:
Originally Posted by billpa
Hi, wanted to give an update. Picture is worth 1K words.

We'll have the preorder button up ASAP!
Thank you! That looks very small and compact. Are there any requirements for mounting it in any particular position or will it auto adjust on power-up?

Quote:
Originally Posted by borneobear
It would be good if they could release the manual first. That would make clear the functions of the unit before purchase.
Ditto!
Apr 29, 2011, 06:07 PM
Registered User
There's a small downside if compared with the FY20A (..it's actually balanced by the size, weigth, no cables and all...): OSD Pro only supports: elevator and airelons, so you cannot have a rudder stabilization; because of this you cannot have the RTH working on rudder only while the wings remain leveled (proven to be the most reliable way to run the RTH avoiding tip dives). It might be only a theoric issue, if the device takes care of the current angle of roll working together with the RTH algorythm, and i don't care much about the rudder stabilization (on FY20A it's not holding position, so not needed at all). I'm confident btw!
Apr 29, 2011, 09:13 PM
Registered User
bill said in another thread that the osd pro willget a firmware update in the future which supports a ppm input. With this theoretically 2 more outputs on the osd are available for rudder flaps etc.
Apr 29, 2011, 10:14 PM
Registered User
Quote:
Originally Posted by nabazul
bill said in another thread that the osd pro willget a firmware update in the future which supports a ppm input. With this theoretically 2 more outputs on the osd are available for rudder flaps etc.
For those that have a receiver with PPM output ... mine is OK (TLRS), but i believe most ones doesn't have it.
I'm awaiting the PPM output not for the rudder anyway... but to try to reduce the cable mess, it will be a great help!
Apr 29, 2011, 11:59 PM
First to go over 106K feet
Crist Rigotti's Avatar
Quote:
Originally Posted by npole
There's a small downside if compared with the FY20A (..it's actually balanced by the size, weigth, no cables and all...): OSD Pro only supports: elevator and airelons, so you cannot have a rudder stabilization; because of this you cannot have the RTH working on rudder only while the wings remain leveled (proven to be the most reliable way to run the RTH avoiding tip dives). It might be only a theoric issue, if the device takes care of the current angle of roll working together with the RTH algorythm, and i don't care much about the rudder stabilization (on FY20A it's not holding position, so not needed at all). I'm confident btw!
On my SW with an F-20A I have the rudder stabilization turned off. I agree with you. It really isn't needed on a set up like the SW.
Apr 30, 2011, 01:32 AM
Fast and low...
aa78's Avatar
[removed]
Apr 30, 2011, 07:44 AM
Registered User
Quote:
Originally Posted by Crist Rigotti
On my SW with an F-20A I have the rudder stabilization turned off. I agree with you. It really isn't needed on a set up like the SW.
Yuppo but as mentioned above, it's really usefull to have for the RTH (i believe you have it hooked that way too.. if i'm not wrong).
Semi-OT: i've only few flights with the SW, yesterday i was experimenting with the rudder turns, i expected some more flat turns (with the FY20 stabilizing the wings), but they are not.. when i turn with the rudder it turns like a easystar! it turns and left/right banks ... it was someway unexpected honestly.
Apr 30, 2011, 08:11 AM
Resistance is Futile
camship's Avatar
Quote:
Originally Posted by npole
....yesterday i was experimenting with the rudder turns, i expected some more flat turns (with the FY20 stabilizing the wings), but they are not.. when i turn with the rudder it turns like a easystar! it turns and left/right banks ... it was someway unexpected honestly.
Ah yes, Centripetal and Centrifugal force raising their ugly heads again and "fooling" the accelerometers/gyros into angular diversions from the gravitational forces alone.

I wonder what Bill and company have done in that department? It's a complete "trick-bag" nightmare to deal with in software.

Going to the lobby for some popcorn, anybody need anything?



Rob
Apr 30, 2011, 08:25 AM
Oopss. Oh well.
borneobear's Avatar
Quote:
Originally Posted by camship

I wonder what Bill and company have done in that department? It's a complete "trick-bag" nightmare to deal with in software.




Rob
All should be revealed in the manual.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Mini-HowTo Please post your OSD Pro wiring diagrams here! billpa Eagle Tree Systems 310 Mar 23, 2016 11:12 AM
Discussion Eagle Tree OSD PRO Return to Home Config (Post your setup here). felipesalomao FPV Equipment 158 May 13, 2015 10:44 AM
Question OSD Pro, eLogger V3, GPS V4 problems updating firmware in OSD Pro jbfoamy Eagle Tree Systems 23 Jun 02, 2012 03:59 PM
Discussion 9CH 2,4 Ghz transsmiter and receiver $54.99 tom112233 Hot Online Deals 7 Oct 01, 2010 06:52 PM
Discussion FMP04 GPS module W/ Eagletree OSD Pro vertcnc FPV Talk 2 Aug 08, 2010 08:26 AM