Thread Tools
Old Feb 27, 2011, 01:16 PM
Mauricio2346 is offline
Find More Posts by Mauricio2346
Registered User
Mauricio2346's Avatar
Discussion

Realflight with Turnigy 9X


Hi folks. last friday i got a Turnigy 9X. it has 8 channel with 2.4Ghz module.
after some problems i could get it work fine with my realflight 4.
how can i get realfight to recognize more than 4 channels?
its very frustrating to use a 8 channel radio and fly with 4 channel on PC

Thanks!
Last edited by Mauricio2346; Mar 01, 2011 at 09:24 PM.
Sign up now
to remove ads between posts
Old Feb 27, 2011, 07:53 PM
Duckie62 is offline
Find More Posts by Duckie62
HELP!!! I'VE BEEN CAUGHT !
Duckie62's Avatar

4 Channels


I am by far probably the last person you should take advise from. My advise normally gets me in trouble with the wife,when she listens to what I have to say. (HA HA!!!) What makes you think you are only using 4 CH. ?
Are you and have you configured your NEW transmitter.
Start RealFlight,connect the transmitter in series-per directions,then Click on CONTROLLER,--CHANNEL MAPPING, Then try the bells and whistles on the NEW controller. You should see the blue bar's change with each switch or knob that you move.
I found this a few questions down:
Setting up Turnigy 9x tx for simulators - 10 days old
ferdous7466
Last edited by Duckie62; Feb 27, 2011 at 08:01 PM.
Old Feb 27, 2011, 08:11 PM
Mauricio2346 is offline
Find More Posts by Mauricio2346
Registered User
Mauricio2346's Avatar
Quote:
Originally Posted by Duckie62 View Post
I am by far probably the last person you should take advise from. My advise normally gets me in trouble with the wife,when she listens to what I have to say. (HA HA!!!) What makes you think you are only using 4 CH. ?
Are you and have you configured your NEW transmitter.
Start RealFlight,connect the transmitter in series-per directions,then Click on CONTROLLER,--CHANNEL MAPPING, Then try the bells and whistles on the NEW controller. You should see the blue bar's change with each switch or knob that you move.
I found this a few questions down:
Setting up Turnigy 9x tx for simulators - 10 days old
ferdous7466
in fact, i made everything you said. just only 4 channels (yaw, pitch, throttle and roll) moves with sticks. no movements on blue bars of real flight by moving knobs and switches of the radio.
so, at this point im using just 4 channels from my radio. channel 5 from the radio is attached to gear switch. channel 6 of the radio is attached to a knob.

Regards;
Old Mar 02, 2011, 10:54 PM
dskalski is offline
Find More Posts by dskalski
Turn up the G's !!!!
dskalski's Avatar
Do you have those assigned switches and knobs controling anything? I know in fms (at least from my using of it) if you don't have a channel controling anything it won't see the channel. Try setting a switch or knob to control a servo in the tx and see if that works.
Old Aug 11, 2011, 05:16 AM
Bloowl is offline
Find More Posts by Bloowl
Registered User
Hello,

I also have a turnigy 9x.
It' my first transmitter and plane.
Before going in the air I want to practice with Realflight...and the 9x

Can you give some descriptiojn how to hook up my turnigy to the computer and get it working with realflight?
Realflight normally is USB, isn't it???

I already tried earlier descriptions with another soft , made a selfmade cable to connect to the audio in of my computer, but the soft (FMS) doen's seem to react)

I woul be very thankful for your detailed description...


Regards,

Bloowl...
Old Aug 11, 2011, 07:24 AM
jeffpn is offline
Find More Posts by jeffpn
Registered User
Quote:
Originally Posted by Bloowl View Post
Realflight normally is USB, isn't it???
Interesting question. Leads me to believe you did not buy RF.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Help! Can't get my Turnigy 9X to work with Phoenix agent1940 Simulators 1 Oct 22, 2010 02:42 AM
Discussion How to use TH9x (Turnigy 9x, etc) with DX6 in trainer mode? polar8 Radios 7 Oct 19, 2010 04:04 AM
Question Turnigy TGY 9X with Corona 2.4Ghz - Very short range giluriel Radios 5 Aug 01, 2010 11:20 AM
Sold Turnigy 9X, with Spektrum Module 2.4ghz $90 Shipped crd Aircraft - General - Radio Equipment (FS/W) 5 May 15, 2010 10:45 AM
FAQ Binding/Synching the Turnigy 9x, with their module to the 4ch rx. Ravenseye Radios 0 May 10, 2009 10:41 PM