3DHobbyShop 59" AJ SLICK - Page 12 - RC Groups
Shop our Airplanes Products Drone Products Sales
Thread Tools
Mar 04, 2011, 03:42 PM
Game on
joesmith285's Avatar
Quote:
Originally Posted by Kevinr25
Has any one orded or tryed the new Motorlfly 3620-750. and how does it compare to the 3625-800?

Thanks for any input
I have about ten flights on my 57" Extra with the 3620-750. I've never ran a 3625-800 before so I can't comment on the differences between them. All I can tell you is the 3620-750 performs very well on the 57. Awsome power and everything comes down cool. I am very happy with it.
Sign up now
to remove ads between posts
Mar 04, 2011, 03:58 PM
↓↘→ + (punch)
theKM's Avatar
I'm running the 3620-750 in my 59 on 4S... piles of power. Ken from Subsonic recommended the 3620-750 over the 3625-800 as it was able to handle the same wattage and less chance of magnets striking the stator when under 3d stresses...

...no need for more than the 3620-750 though... as said, piles of power...

3DHS 59" AJ Slick (6 min 18 sec)
Last edited by theKM; Mar 04, 2011 at 04:42 PM.
Mar 04, 2011, 04:04 PM
Registered User
NeverEnough's Avatar
Do you think there is any need / difference to run the 3625-800 over the 3620-750 since I will soon be flying in 100+ degree days? I plan on going with the 3620-750 if it will stay cool enough.....
Last edited by NeverEnough; Mar 04, 2011 at 04:15 PM.
Mar 04, 2011, 04:10 PM
↓↘→ + (punch)
theKM's Avatar
I'd stay with the 750 over the 800 because of the whole "magnets striking stator" while 3D'ing thing... hot days will just be a factor on how long between flights, and maybe adding some extra cooling mods like scoops, etc
Mar 04, 2011, 04:16 PM
Registered User
NeverEnough's Avatar
Sounds good, thanks
Mar 04, 2011, 04:26 PM
It took me 30 years?!?!!!
Quote:
Originally Posted by theKM

... need for more than the 3620-750 though... as said, piles of power...

Did you mean to say "no need..."?
Mar 04, 2011, 04:37 PM
Registered User
Thanks now I just need my Slick to get here.
Mar 04, 2011, 04:42 PM
↓↘→ + (punch)
theKM's Avatar
Quote:
Originally Posted by btsai
Did you mean to say "no need..."?
right, no need
Mar 04, 2011, 04:59 PM
Registered User
stickybeatz's Avatar
Anyone know when the 3620-750 will be back in stock?
Mar 04, 2011, 05:05 PM
iumop ap!sdn w,I
G.P.'s Avatar
Quote:
Originally Posted by stickybeatz
Anyone know when the 3620-750 will be back in stock?
From the subsonic site:

" MOTROLFLY DM-3620 Brushless motor series are for RC Airplanes 72 to 124 ounces depending on model type. Check below for more details or click the link to the PDF down load for all information for each Kv in this series.
The PDF will open in a new window so you don't loose your spot.
All motors come with an X mount for mounting the motor to the fire wall, pre soldered 4mm gold connectors, and a 6mm Hub prop adaptor; collet style prop adaptor sold seperately for behind fire wall mounting.motrolfly, motorfly, motrofly, brushless motors
More info coming soon
This motor is currently out of Stock
, but available for back order
Due in
3/24/2011"
Mar 04, 2011, 05:13 PM
Registered User
stickybeatz's Avatar
Quote:
Originally Posted by G.P.
From the subsonic site:

" MOTROLFLY DM-3620 Brushless motor series are for RC Airplanes 72 to 124 ounces depending on model type. Check below for more details or click the link to the PDF down load for all information for each Kv in this series.
The PDF will open in a new window so you don't loose your spot.
All motors come with an X mount for mounting the motor to the fire wall, pre soldered 4mm gold connectors, and a 6mm Hub prop adaptor; collet style prop adaptor sold seperately for behind fire wall mounting.motrolfly, motorfly, motrofly, brushless motors
More info coming soon
This motor is currently out of Stock
, but available for back order
Due in
3/24/2011"
Thanks
Mar 04, 2011, 08:26 PM
Up,Up!up!!up!!!
gonzoman5's Avatar
Hey Aaron, will the ice75 be enough for the 3620-750 swinging a 15x8 or 15x7?
Mar 04, 2011, 10:37 PM
Team 3DHS
BoneDoc's Avatar
You should be ok. The ICE 100 is good for the 70" Size airframes.
Mar 05, 2011, 12:05 AM
Get It? - Got It!
Maverickk's Avatar
I am interested in getting into a larger 3DHS plane and I am torn between the 57" Extra SC and this new Slick 59". I currently fly the 47" Edge and like it a lot, but am looking for a bit less agressive plane which can fly both 3D and pattern-style well. Both look like great planes for this type of flying - any guidance would be appreciated. Thanks
Mar 05, 2011, 12:32 AM
Up,Up!up!!up!!!
gonzoman5's Avatar
If it's precision I'd go with the Extra. The slick will do all of it as well, but it's not quite as precise as the Extra. I found the Slick likes to rotate and keep rotating (snaps are a plus), as where the Extra will stop rotating right when you let off the sticks. It also has less ke coupling, and floats more. I own the 51 Slick and the 72" SC (59 coming soon), and those are the two biggest differences I found. The 59 is a whole different bird than the 51 though, and Ben said there's not as much ke coupling, so I'd assume it's going to be better at precision than the 51.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Wanted 3DHobbyShop 70" AJ Slick bbigdog2243 Aircraft - Electric - Airplanes (FS/W) 2 Jan 01, 2011 12:24 AM
Video 3DHobbyShop Aj Slick ''Rc Day Two Rockin'' with onboard video Get Real Electric Plane Talk 2 Jun 18, 2009 04:07 AM
Sold 3dhobbyshop AJ Slick Wings Flazo Aircraft - Electric - Airplanes (FS/W) 4 May 16, 2009 11:46 PM
Discussion 3DHobbyShop 51" AJ SLICK - how durable for 3D moves? Voyager 3D Flying 13 May 06, 2009 07:10 AM