VECTOR UNITS - typology - Page 6 - RC Groups
Thread Tools
Apr 22, 2012, 11:22 AM
Registered User
Tomas Dunker's Avatar
More "vektor"example:
Vector control (0 min 39 sec)

>> How I build it <<
Last edited by Tomas Dunker; Apr 22, 2012 at 11:29 AM.
Sign up now
to remove ads between posts
May 03, 2012, 03:33 PM
Your customer
Silverexpress's Avatar

Do you guys know if the Vektor-Technik kit for the funjet is still available?
Sep 19, 2012, 06:38 PM
14s 180mah should be enough...
IFLYOS's Avatar
Originally Posted by HigherVision
Here is a vector thrust unit I am developing using 3d print technology.
Not sure how to embed this video here?

If anyone is interested, I will post the stl files on my website for anyone to print their own. Otherwise I can make one for you if you cover the costs.
Well..I can comment as to how well this design works. I got my hands on the STL files, and having recently completed my MendelMax printer, this was one of the things on the short list for me to print

I had 3 good flights this afternoon, and the unit did well. The third one ended in a crash due to my own stupidity (forgot you need to keep power on even when landing...old airplane habits)

I want to get some more time on it before I think about any changes, since this is my first vector kite of any sort. I do, however, want to look at scaling it down some, to use a couple of smaller motors I have and match those up with some small kites for backyard fun....
Latest blog entry: Intro..a few years to late!
Nov 09, 2014, 09:13 PM
Registered User


Originally Posted by flattermann
Progress never stops!

I've developped a very special Birotor-Vector Unit, consisting of

1 Gimbal
2 Counterrotating BL-motors
2 9035 Props
2 MG Servos
2 ESCs
2 Receivers

Total weight is around 240grs., thrust should be around 900 grs.

Video of the today's demo/maiden:

*** SORRY for the bad camera adjustments :-)) ***

===> New video under

taken on Oct. 7th, 2012, at Menden Kite Festival ( Germany )

Have fun!


Sir, hi

Very short:
1. . Very nice production. (This no compliment)
2. I am interesting at one (fore beginning) device.
3. Is it possible give - me to know.
Before I can to say: I suppose to use motor brushless ~ 400W, Thrust (max) 1,4kg,
prop in range 8-10"
4. Please give me answer on my E-mail:

Thank for your time.

Nov 11, 2014, 11:04 AM
Registered User


Originally Posted by HigherVision
Probably about $20. I haven't fully tested it yet to see how much abuse it will take or if any areas need strengthened. So far the print seems very strong and difficult to break.
================================================== ==========Sir,
How about manufactory one (for beginning) of mechanism.
Motor 360W, thrust 1450g. (max)

If it possible give me to know by E-mail <fsat92@hotmail,com>

Thank, for your time

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Vector-thrust pusher with 3-axis gyo, anyone ever build? learn2turn Foamies (Scratchbuilt) 8 Sep 23, 2010 07:34 PM
Discussion JAS 39 360 VECTOR THRUST about to click Buy it Now. need advise airbagit13 Foamy EDFs 3 Sep 08, 2010 12:28 PM
Sold Sold Pending: Two NIB Turbo Vector kits Wattage/Hobby People w/o fan units 50% off jcstalls Aircraft - Electric - Airplanes (FS/W) 7 Oct 21, 2008 07:13 PM
Discussion Vector Vector **with maiden vid** sno Slope 82 Apr 21, 2008 10:50 AM
Wanted Vector Schuebeler VECTOR II PerfTech Aircraft - Electric - Airplanes (FS/W) 0 Jan 22, 2008 11:32 PM