Boeing 777 200LR - Page 11 - RC Groups
Thread Tools
Apr 27, 2011, 07:37 PM
Avoid The Ground!
Flexserve's Avatar
Quote:
Originally Posted by SilentHunter
The 777 looks great!

I dont know whats more interesting, the plane or studying the crap around it! when I was a kid my room looked just like your play room there. Old Air compressors, lego's, gears, screws, wires, wood all stroon about. My mom would go into fits once in a while! She gave up.

There is a master builder who makes 1/6 scale tanks who thrives on that type of chaos too. his backgrounds are excellent. Nothing wrong with it, I just think its interesting.

I've seen your models Silent...and..well..I hate you...so very... very much.
Sign up now
to remove ads between posts
Apr 30, 2011, 04:14 PM
was geht , müssen unten kommen
Keenan smith's Avatar
yeah yeah lol
Jul 10, 2011, 09:30 AM
was geht , müssen unten kommen
Keenan smith's Avatar
ANY updates
Jul 10, 2011, 09:37 AM
Retardedly intelligent
foam and tape's Avatar
need $$$ first and some time, I do plan on having it airborne by September (at the earliest) or April 2012 at the latest (SEFF time)
Jul 10, 2011, 09:40 AM
Registered User
LuvEvolution7's Avatar
pfffffft. excuses. dollar store foam board. buck a sheet. finish it already. LMAO.
Jul 10, 2011, 09:41 AM
Retardedly intelligent
foam and tape's Avatar
that and i'm kinda bored with it at the moment (its summer) not time for building.... time 4 CRASHES
Jul 10, 2011, 09:43 AM
was geht , müssen unten kommen
Keenan smith's Avatar
lol i just got back 2 the 380:d:
Jul 14, 2011, 12:01 AM
Suspended Account

Now that build room makes Steve St. Martin look like a neat freak.
Bill
Aug 07, 2011, 09:10 PM
Retardedly intelligent
foam and tape's Avatar
ok, i'm interested in it again.... going to work on it abit more for about a week then I'm going on vacation for a week (going to Florida to throw an RC boat into the ocean)

for the power system I'm going with the turnigy 600 heli motors the 1100kv variety http://www.hobbyking.com/hobbyking/s...dproduct=11102

not sure how well its going to work though.... any thoughts suggestions?
Aug 07, 2011, 09:34 PM
Registered User
LuvEvolution7's Avatar
this is a 90mm jet, right? 1100Kv isn't enough RPM/volt. remember that an electric motor is probably only good for 80-90% pf this number under load, so your RPM is gonna be very low on an 1100. you'de probably have to run it on 14S to make it work. you need probably 1600-1800Kv as a good start to make a 90mm come to life. since you are better running a high volt/low amp setup, you should run at least 6S. if it were me, I'de run an 1800 on 6S and that should give you enough oomph to cruise around at half throttle or less.
Aug 07, 2011, 09:55 PM
Say watt?!
killerwin's Avatar
Quote:
Originally Posted by foam and tape
...I'm going on vacation for a week (going to Florida to throw an RC boat into the ocean)
If you're coming to South Florida (Miami/Fort Lauderdale/The Keys) shoot me a PM and we'll do some flying in the sun.
Aug 07, 2011, 09:56 PM
Say watt?!
killerwin's Avatar
Quote:
Originally Posted by LuvEvolution7
this is a 90mm jet, right? 1100Kv isn't enough RPM/volt. remember that an electric motor is probably only good for 80-90% pf this number under load, so your RPM is gonna be very low on an 1100. you'de probably have to run it on 14S to make it work. you need probably 1600-1800Kv as a good start to make a 90mm come to life. since you are better running a high volt/low amp setup, you should run at least 6S. if it were me, I'de run an 1800 on 6S and that should give you enough oomph to cruise around at half throttle or less.
I think he's using a pair of 107mm fans.
Aug 07, 2011, 09:56 PM
Retardedly intelligent
foam and tape's Avatar
102 mm, damn... too bad I already ordered it (at least I just got one) gonna watt meter it and make sure everything checks out ok first before buying a second. there f**** 60$
Aug 09, 2011, 01:58 AM
Registered User
LuvEvolution7's Avatar
I think it may be too litlle Kv for that size fan too, but then again, we are talking about a floaty airliner here and not a balls to the wall fighter plane. it may be just fine, but take a little extra throttle to cruise around. if you want the amps to come down to make it easier on the packs, just go up a cell.
Aug 09, 2011, 10:35 PM
Retardedly intelligent
foam and tape's Avatar
Quote:
Originally Posted by killioughtta
If you're coming to South Florida (Miami/Fort Lauderdale/The Keys) shoot me a PM and we'll do some flying in the sun.
unfortunately I'll be stuck in the Pensacola area of Florida. got to visit some family.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Boeing 777-200LR Twin 90mm project NickM91 Scratchbuilt EDFs 20 Jul 10, 2011 09:40 AM
boeing 777 u.s air Scale Kit/Scratch Built 16 Dec 03, 2002 07:15 PM
Looking for Boeing 777 AutoCad Drawing David McCracken Electric Ducted Fan Jet Talk 5 Nov 25, 2002 07:23 PM
Boeing 777-200/300 Sections Guybo Fuel Jet Talk 3 Jun 15, 2002 08:04 PM
boeing 777 nacelle jermaine Electric Ducted Fan Jet Talk 1 May 20, 2002 02:24 AM