New Products Flash Sale
Thread Tools
Old Apr 17, 2011, 06:01 PM
Tug Jaguar is offline
Find More Posts by Tug Jaguar
Towing for a living
Cool build, I've seen that boat around a few times while at work. Been on board the Peggy once.
Sign up now
to remove ads between posts
Old Apr 17, 2011, 06:34 PM
Jerome Morris is offline
Find More Posts by Jerome Morris
Registered User
Jerome Morris's Avatar
Here are a few more of the wheel house.
Old Apr 17, 2011, 06:48 PM
Jerome Morris is offline
Find More Posts by Jerome Morris
Registered User
Jerome Morris's Avatar
The RTV has a durometer reading of about 35. Pretty soft and flexible,
like cooked spagetti.
The first coat on the mold was with a product called Shell Shock. It is very rigid when dry. An experimental piece smoothed to 1/16" thick was similar to plastic sheet, but kind of brittle.
On top of that AND on the out side of the RTV mold I applied two thick coats of Plasti-paste. A two part resin that is extremely hard when dry. This gave the mold some support and gave the hull strength. I will have to mix up some more and make flanges for the outer mold support. This stuff also locked the hull into the mold so that I had to cut the plasti-pasta down the center line to be able to remove the hull from the RTV.
I believe the plasti-paste is hammer proof. It is very strong and they say it makes a good adhesive. It's some sticky as soon as you start to mix it.
http://www.smooth-on.com/
Old Apr 17, 2011, 07:31 PM
RGinCanada is offline
Find More Posts by RGinCanada
Tinkerer in Training
RGinCanada's Avatar
Thanks for posting the extra info. Interesting stuff.

The tug is looking great!
Old Apr 17, 2011, 11:10 PM
ZZ56 is offline
Find More Posts by ZZ56
Nickel Belter
ZZ56's Avatar
Awesome build. Is she going to be RC?
Old Apr 18, 2011, 07:34 AM
Jerome Morris is offline
Find More Posts by Jerome Morris
Registered User
Jerome Morris's Avatar
No R/c for the first one. She'll be a static piece.
I hope to make another for my self this summer that will be R/C.
Old Jul 02, 2011, 08:06 PM
Jerome Morris is offline
Find More Posts by Jerome Morris
Registered User
Jerome Morris's Avatar
And a new and improved spill proof glue bottle holder.
Knock this baby over and you have bigger problems then split glue.
Old Sep 23, 2011, 12:31 AM
Tug Hercules is online now
Find More Posts by Tug Hercules
Tug Hercules Fireman
Tug Hercules's Avatar
Jerome,

What winch kit, did you mount on the stern?

Thanks.

Rick
Old Sep 23, 2011, 09:05 AM
Jerome Morris is offline
Find More Posts by Jerome Morris
Registered User
Jerome Morris's Avatar
Rick, Totally scratch. Plastic sheet and strips. Wood dowel for the reel.
From photos, No dimensions, just built to look and fit the boat.
Old Sep 23, 2011, 09:36 AM
Tim B. is offline
Find More Posts by Tim B.
Registered User
Tim B.'s Avatar
Jerome, what great work !
A big inspiration.
Scratchbuilding all those things shows great patience and skill.
What material is the superstructure made from ?
Did you make the lights that run around the superstructure ?
Do they work ?

Thanks, Tim
Last edited by Tim B.; Sep 23, 2011 at 09:39 AM. Reason: Add text
Old Sep 24, 2011, 04:10 AM
capntroy is offline
Find More Posts by capntroy
Keep a Steady Strain....
capntroy's Avatar
Looking good!
Old Sep 24, 2011, 09:30 AM
Jerome Morris is offline
Find More Posts by Jerome Morris
Registered User
Jerome Morris's Avatar
The structure is ABS plastic from Plastruc Inc.
It's nice stuff to work with.
Tim, I think your asking about the vent stacks, They are made from copper house wire, I believe 12 and 16 gauge. I turned some "hoods" on the lathe and they a little red paint and some light blue or yellow to signify the tank being vented.
In way of lights I'm thinking of using led's and paint the cage around the light, or use a thin gauge wire to represent the cage.
Old Oct 13, 2011, 11:57 PM
tugboatjack is offline
Find More Posts by tugboatjack
RC Boat Crazy
tugboatjack's Avatar
Looking great. Im watching this one.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion 4-Foot tall Santa rides a Mean Machine! questtek Racing Boats - Electric 8 Dec 05, 2010 03:58 AM
Discussion 4 1/2 foot toystore glider conversion nelsonmay10 Foamies (Kits) 10 Feb 21, 2007 08:12 PM
Question white 4 1/2 foot gliders from WalMart.. conversion? tdavis Foamies (Kits) 6 Apr 06, 2004 05:20 PM
6'4" indoor flyer with less than 1 oz per sq foot loading MichaelConnally Scratchbuilt Indoor and Micro Models 30 Aug 08, 2003 05:53 AM