Thread Tools
Feb 07, 2011, 03:35 PM
Registered User
Tmark65's Avatar
Help!

LiPo Reg PLD-BAC-ESJ-LMA


Hi guys,

I bought this LiPo reg from PDaniels at NQRC.com.
http://nqrc.com/?vp=PLD-BAC-ESJ-LMA

His service was absolutely fantastic, to get it in my hands, fast shipment, but there was no manual in the package.

Anybody who can help ???

Paul ???

I need to know how I can initiate the lost model function, what sounds mean, what the led flashing means ... all these !

Best regards
Sign up now
to remove ads between posts
Feb 07, 2011, 08:48 PM
ground penetration specialist
Nathan Schmoekel's Avatar
There will be a tone when you plug it in to tell you its on.

The LED is flashing your battery voltage......7 long flashes followed by 4 short flashes would indicate 7.4 volts....and so on

There will be a beep beep beep continuing sound when you have reached low voltage ....this is your "land soon" warning.

The lost model alarm will activate if you leave the plane turned on, and simply turn off the transmitter.....not sure if the tone is solid on, or if it beeps...

That should about cover it...
I'm sure Paul would chime in, but with the cyclone that just hit Australia a few days ago he might be a little preoccupied.
Feb 08, 2011, 01:47 AM
Registered User
Tmark65's Avatar
Thanks pal,

Now it starts to be more clear ....

May 02, 2011, 02:47 AM
Registered User
Tmark65's Avatar
Quote:
Originally Posted by Nathan Schmoekel
There will be a tone when you plug it in to tell you its on.

The LED is flashing your battery voltage......7 long flashes followed by 4 short flashes would indicate 7.4 volts....and so on

There will be a beep beep beep continuing sound when you have reached low voltage ....this is your "land soon" warning.

The lost model alarm will activate if you leave the plane turned on, and simply turn off the transmitter.....not sure if the tone is solid on, or if it beeps...

That should about cover it...
I'm sure Paul would chime in, but with the cyclone that just hit Australia a few days ago he might be a little preoccupied.
Hello Nathan,

According to your message, If I turn off my transmitter it will starts shouting, unfortunately does nothing !
If I connect the battery and have the TX OFF YES it sounds, but yesterday when my Blaster landed inside the field and wanted to hear the Lost Model activated I was totally disappointed because nothing happened !

Paul any advice on this ..... ?


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
New Product BAC-ESJ: lipo 5V regulator with voltage alarm, readout, charge port and switch Inflexo Slope 3 Aug 17, 2014 08:08 PM
New Product PLD 3A linear BEC/BAC with LMA, LVA and dual-pack Inflexo Slope 0 Jan 16, 2010 08:17 AM
New Product 2S280-12C slim lipos (for use with BAC and BAC-ESJ units) Inflexo Hand Launch 1 Aug 13, 2009 03:51 AM
Cool DL50 with a PLD BAC-ESJ neilmny Hand Launch 27 May 10, 2009 03:20 AM