1/2 scale FF WINGO!! - RC Groups
Shop our Airplanes Products Drone Products Sales
Thread Tools
Jul 31, 2003, 09:49 PM
Registered User

1/2 scale FF WINGO!!


my second FF lol I scaled a wingo down to 1/2 approx 1/3 done Ill post pics unless u guys tell me stop lol
Sign up now
to remove ads between posts
Jul 31, 2003, 09:54 PM
Registered User
laying out and cutting out wing
Jul 31, 2003, 09:55 PM
Registered User
fuselage
Jul 31, 2003, 09:57 PM
Registered User
fuselage cut out
Jul 31, 2003, 09:58 PM
Registered User
Fuselage bent around 2 1/2" spray can and glued at ends
Jul 31, 2003, 09:59 PM
Registered User
Scribing in a bottom
Jul 31, 2003, 09:59 PM
Registered User
cut out bottom
Jul 31, 2003, 10:00 PM
Registered User
bottom in , scribe rest of pieces
Jul 31, 2003, 10:01 PM
Registered User
scribe in rest of pieces and glued
Jul 31, 2003, 10:03 PM
Registered User
here is wing and fuselage all I have from an hour and half of work =( wing bent good shape seems to follow my real wingo very closely, I did make a mistake on building the fuselage to scale , I did not take into account the thickness of material on top and bottom so it is 1/2" taller than perfect scale
Jul 31, 2003, 10:05 PM
reznikvova's Avatar
Nice informative thread,
Keep the pics commin'

-Vova
Jul 31, 2003, 10:08 PM
Registered User
thx, will do, I have just the old broken fishin pole in the garage for the stick lol, im too cheap to buy carbon fiber
Jul 31, 2003, 10:19 PM
reznikvova's Avatar
You can go to a sports authority, or any stores that sells bow&arrow supplies. Cut off the sharp tip, and rear "feather" and you have a very stiff rod.
Jul 31, 2003, 11:02 PM
Registered User
Ooooh, a 1/2" off. That's really going to cost you some points at the scale showoff.

What motor is it getting?
Jul 31, 2003, 11:02 PM
I'll have the roast duck
maximus's Avatar
Have you seen the review of the Widget?
http://rcgroups.com/links/index.php?...at=198&id=4189


Thread Tools