Thread Tools
This thread is privately moderated by birdofplay, who may elect to delete unwanted replies.
Feb 04, 2011, 07:16 PM
Retired CAD guy
birdofplay's Avatar
Thread OP

Reaching me

March 3, 2015:

Sorry guys but my Secondary Domain name was Deconfigured.
I have my ISP working on it. should be back soon.

Please use until things settle down.

Thanks for your patience and understanding.

Hoosier Cutout Service


When I moved from Washington State to Indianapolis, in 2012, I had to change the
Service name. Northwest Cutout Service was changed to Hoosier Cutout Service.

That Domain name was a bit long but it worked for two years side by side with my
old original domain name of
That one originated when my wife had a manufacturing business.

Regardless, my ISP never charged for it until NOW !
Surprising but not complaining I just let it go.
Now when my ISP tried to invoice me for the domain name it must have gone to junk or spam so it never got paid.
So I got another exasperating service interruption. arrgh !

Things should be back to normal and stable soon.

If you have questions just e-mail me [email protected]

Dec 2013:

My club president talked me into an interview and this is the result ...

I'm a retired CAD manager with a CNC machine.

I do cutting for fun and to support my hobby purchases.

I don't cut for general income.

I'm always on the look out for an interesting new FOAMY plane to offer as a set of cut parts.

JUST added are the 100% and 75% "The Twins" by Foam&Tape.

My web pages are at ...

Bob Neitzke
Hoosier Cutout Service

I started a VIMEO account for random Vid that I take

Nothing commercial just vids.

Early Oct 2012 I MOVED from Cathlamet, Washington state to
Indianapolis Indiana.

I hope to announce that my CNC operations are back in service ASAP.

Oct 10 :
Travel across country to Indian has Been accomplished.
We are staying with son at the moment.
After viewing several currently available homes we are already "Just About"
to make an offer on a nice, modest, 5 acre, FLYABLE property.

If all goes well I should be Moved in and back on line by Early December.
An new shop building WILL be constructed in the Spring.

OCT 11 -12
Today all out stuff was stored while waiting for the House to be
inspected, water tested yada yada yada ...
We expect to be IN the house by Mid Nov and Up and running for
Foam cutting service by December.

Of note is that I ill now have a MY OWN RUNWAY and flying field.
I am getting a 5 acre site with not Overflight issues and
More than 300' of runway .

Wooo Whooo !!!

Nov 20, 2012

I FINALLY have all my stuff moved from the west coast and the Indy Storage loker into my new home.
Today I got the CNC machine frame assembled and the Motors mounted and wired up.
Tomorrow I HOPE to have the computer controls connected and a test run accomplished.

With the Thanksgiving Holiday and lots of relatives I expect that Early Next week I will be able to
announce a RESTART of activity and services.

I getting close ...Finally !!!

Also: I have been able to take a few BREAKS from the moving in chaos
and actually FLY from my own back yard runway !
The Slide On Ground F-15 and the Falclone have been performing well.

Nov 24, 2012
Hi Guys,

I believe that I have my CNC machine back together enough
to start making kits again.
I have some foam stocks and a have another 2 cases
of depron arriving on Wednesday.

I've made web page changes, so if you discover
something amiss please let me know right away.
Also NO MORE Black depron offerings.

Thanks for your patience while I moved 2400 miles,
bought a new house and moved back in. Wheew !

As always I'm here to serve.
e-mail - [email protected]
Web pgs -

I am now almost all moved in to my new Shop.
My son helped build the Larger part and
I have a 30'x30' wing to work on models.
It has a 10' x 30' Back Porch where I have a 150x300' runway.

Last edited by birdofplay; Mar 04, 2015 at 08:20 AM.
Sign up now
to remove ads between posts
Jul 21, 2013, 11:48 PM
We Do It With FRQZ
RM_Sparks's Avatar
Hey Bod,

they all look great! i want that swing wing.
Last edited by RM_Sparks; Jul 22, 2013 at 10:08 AM.

Quick Reply
Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Trouble reaching stu78 Vendor Talk 0 Sep 17, 2003 09:44 AM
RTF scale AV8A Harrier: "far-reaching benefits far beyond the leisure market" ?!! Bill Glover Electric Plane Talk 35 Jan 04, 2003 09:38 AM
Hecell reaching full capacity. Why the differences? Erik Johansson Batteries and Chargers 2 Dec 11, 2002 08:57 AM
Trouble reaching EZone?? DBCherry Site Chat 6 Mar 16, 2002 12:32 AM
DAW Extra reaching the building board JensJakob68 Electric Plane Talk 0 Feb 05, 2002 03:05 AM