Blade 450 3d - Page 78 - RC Groups
Shop our Airplanes Products Drone Products Sales
Thread Tools
Nov 24, 2012, 12:43 AM
Dixie Normious
Eastcoast78's Avatar
The only time i don't see any movement is when my throttle is at 50% cause my pitch curve in N and I is 50%on the 3rd position...if that helps. When you are doing this where is your Throttle stick? 0% 50% 75% 100%?
Sign up now
to remove ads between posts
Nov 24, 2012, 01:03 AM
Which way is up?
stuball56's Avatar
At 0%. I don't move the throttle stick at all. Just toggling the switches.
Last edited by stuball56; Nov 24, 2012 at 09:33 PM.
Nov 25, 2012, 12:30 AM
Registered User
Quote:
Originally Posted by stuball56
At 0%. I don't move the throttle stick at all. Just toggling the switches.
If throttle at 0%, you will hardly see movement between normal and th (as per manual 45% and 42% respective pitch settings). You SHOULD see movement between normal (45% pitch) and stunt (0% pitch which is full negative pitch) but as advised make sure you disconnect motor from esc when you switch over as heli will spool up in stunt mode
Nov 25, 2012, 03:18 PM
Which way is up?
stuball56's Avatar
Thank you. Last night I crashed and slightly bent one of my flybar rods. I straightened it out by eye. Funny thing is this is my first crash and I wasnt even trying to fly the thing. I knocked it off my work table and onto the cement floor! Only about a 3 foot drop, and I've been debating whether or not to use the training gear so it was on, probably saved it from further damage. I also messed up my only male Deans plug so I have to get (one) some of those now too. All my batteries (for this heli) are Deans.
Nov 25, 2012, 03:28 PM
Registered User
what all kind of upgrades has everybody done to there 450 3d really love this heli i'm running these upgrades on mine
radix main blades
scorpin 2221-8
12th pinion
eflite carbon paddels
futaba 401 & 9257 servo
Nov 25, 2012, 05:59 PM
Gravity impaired
jrjr's Avatar
Quote:
Originally Posted by stutts121472
what all kind of upgrades has everybody done to there 450 3d really love this heli i'm running these upgrades on mine
radix main blades
scorpin 2221-8
12th pinion
eflite carbon paddels
futaba 401 & 9257 servo
Here's one of mine

Nov 26, 2012, 06:14 AM
Registered User
War Horse's Avatar
Wow, that landing skid looks huge, I like it. What size Align is that for?
Nov 26, 2012, 06:16 AM
Gravity impaired
jrjr's Avatar
TRex 600..... I opted for that rather than training gear and just never took it off. I like it and it fits in with her name.... Bigfoot

Last edited by jrjr; Nov 26, 2012 at 09:55 AM.
Nov 26, 2012, 06:40 AM
Registered User
War Horse's Avatar
Thanks, I gotta get me one

I put on skid from a DH 9101, its a bit bigger than stock and the plastic is more flexable, but still I have the training gear on, my landings sometimes leave something to be desired
Nov 26, 2012, 08:30 AM
Gravity impaired
jrjr's Avatar
This is the completed version with the name on the canopy too.
May not be for everyone but I like it!

Nov 26, 2012, 08:51 AM
Registered User
War Horse's Avatar
I agree with you, I think that looks very tuff.
Nov 26, 2012, 09:04 AM
Registered User
looks cool to me
Nov 26, 2012, 09:06 AM
Registered User
i want to get a diff canopy for mine just don't no which one to get
Nov 26, 2012, 09:53 AM
Which way is up?
stuball56's Avatar
Looks great. I was wondering about the little rubber pieces on the skids? I thought about it but worried that then instead of sliding the heli would just tip over. I am beginner pilot.
Nov 26, 2012, 09:56 AM
Gravity impaired
jrjr's Avatar
Quote:
Originally Posted by stuball56
Looks great. I was wondering about the little rubber pieces on the skids? I thought about it but worried that then instead of sliding the heli would just tip over. I am beginner pilot.
Yea it doesn't slide good with them on but they come off with no trouble. I was mistaken in earlier post. They are from a TRex 600 not 550. Post corrected

http://www.ebay.com/itm/Align-H60038...item53f06d941e


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
New Product Blade 450 3D RTF/BNF! DFflyer Mini Helis 63 Apr 08, 2013 06:26 PM
New Product New Blade 450 3D choppersrule Electric Heli Talk 0 Feb 03, 2011 10:08 PM
Wanted WTT Blade MSR BNF plus cash for a 450, 250, or Blade 400 RX ready jedi391 Aircraft - Electric - Helis (FS/W) 1 Jan 08, 2011 12:13 PM
Discussion Blade 400 3D and E-Revo, or T-Rex 450 SE V2... heliaddict22 Off-road Cars 2 Oct 22, 2008 10:51 PM
Discussion TREX 450 or EFlite Blade 400 3D or Belt CP carbon? emiliomuno Mini Helis 7 Oct 02, 2008 07:22 PM