Blade mCP X BNF Heli... - Page 1004 - RC Groups
Thread Tools
Jan 31, 2013, 10:37 PM
Registered User
sideburn's Avatar
Got no replies on here about my heli for sale so I posted it on ebay if anyone is interested...
Its got a bunch of spare parts too.. http://www.ebay.com/itm/271148248445...84.m1555.l2649
Sign up now
to remove ads between posts
Feb 01, 2013, 08:42 AM
Registered User
Thank you guys SO much.
I have read several hundred posts so far, but there is a LOT here and I wanna fly.
Thanks again.
Feb 04, 2013, 08:45 AM
Parkfly Padawan
JForbes's Avatar
Welcome aboard Mrelder!
Feb 06, 2013, 05:01 PM
ΜΟΛΩΝ ΛΑΒΕ
habitforming's Avatar
Does anyone know where to get the 8 tooth pinion for the c05m brushless upgrade (or does anyone have a spare)? i did the upgrade to mine a while back and never bothred with the pinion at the time.
Feb 07, 2013, 03:00 AM
Registered User
Quote:
Originally Posted by habitforming
Does anyone know where to get the 8 tooth pinion for the c05m brushless upgrade (or does anyone have a spare)? i did the upgrade to mine a while back and never bothred with the pinion at the time.
Maybe this would fit your need
http://hobbyking.com/hobbyking/store...0&currentPage=
Feb 07, 2013, 04:12 PM
Registered User
rcflyair's Avatar
There are some available at rcflyer.net too.
Feb 07, 2013, 05:31 PM
ΜΟΛΩΝ ΛΑΒΕ
habitforming's Avatar
Quote:
Originally Posted by ercapoccia
Close, but I need 8 tooth 1.5mm, they only have 9 tooth in that size, as does all of eBay, apparently...
Last edited by habitforming; Feb 07, 2013 at 05:37 PM.
Feb 07, 2013, 06:41 PM
Registered User
rcflyair's Avatar
Whooops, sorry, I thought the co5m had a 1mm shaft......
Mar 06, 2013, 05:51 PM
ITS ME DAVID's Avatar
Is there a blade mcp x v2 thread ?
Mar 06, 2013, 06:08 PM
Registered User
Quote:
Originally Posted by ITS ME DAVID
Is there a blade mcp x v2 thread ?
https://www.rcgroups.com/forums/show....php?t=1403549
Apr 10, 2013, 03:32 PM
Registered User
MCPX for sale:

http://cgi.ebay.com/ws/eBayISAPI.dll...:L:LCA:US:1123
Apr 16, 2013, 05:30 PM
Maintain Thine Airspeed !
Redbrickman's Avatar

Help - stuck in soft start mode


I've been flying the MCPX dumbed down (positive pitch only) but yesterday I ended up some how on the "Soft start" mode and with collective pitch!

I did not change any settings on the DX6i but changed blades after a bad crash. I then set the throttle hold on and checked the blades a swash were moving OK.

On releasing the throttle hold the heli spooled up and then I lifted off to my amazement and found I was flying in collective.

Bonus is I can actually hover it easier than I could in the dumbed down mode!

Can anyone tell me how to disable soft start?

Also how do you fixed wing guys actually train your brain to not shut the throttle in emergencies when flying fixed pitch, because the mcpx is really getting hurt when I shut the throttle
Apr 16, 2013, 05:54 PM
Heli Mad
stevebarrow's Avatar
Preflgiht mantra - I will throttle hold if I have a problem also don't try to save it into the ground as this will take away the reaction time to hit throttle hold.
Apr 16, 2013, 06:12 PM
Maintain Thine Airspeed !
Redbrickman's Avatar
Thanks, and I assume you mean the grey throttle cut and not the switch as it seems difficult to reach in a panic!
Apr 16, 2013, 06:26 PM
Heli Mad
stevebarrow's Avatar
Sorry not familiar with the DX6i but which ever stops the motor.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Rant Blade MFP and the Blade MCP? Hellysmack Micro Helis 49 Jun 28, 2011 09:53 PM
Wanted Parkzone BNF or Blade heli tftcrider Aircraft - Electric - Airplanes (FS/W) 3 Feb 02, 2011 06:52 PM
Sold E-Flite Blade MCX Micro CX BNF Elec Coaxial Ultra-Micro Heli ttucker Aircraft - Electric - Helis (FS/W) 3 Dec 08, 2010 04:17 PM
Sold E-Flite Blade MCX Micro CX BNF Elec Coaxial Ultra-Micro Heli ttucker Aircraft - Electric - Helis (FS/W) 0 Nov 21, 2010 07:45 PM
Sold 260mm MCP woodie blades for mico heli's seattle_helo Aircraft - Electric - Helis (FS/W) 6 Jun 04, 2008 11:58 AM