Thread Tools
Old Feb 02, 2011, 09:05 PM
DynamicFoamy is offline
Find More Posts by DynamicFoamy
DynamicFoamy's Avatar
New Product

***NEW*** ACIES6400 Micro pusher jet by:DYNAMIC FOAMY


New micro pusher jet from Dynamic Foamy. It is laser cut and pre-painted as shown. We hope to start shipping these after Efest. Anyone at Efest can pick one up at the show!

Thanks,
Bert Wilson
Site Sponsor
Latest blog entry: Customer Support Forum
Sign up now
to remove ads between posts
Old Feb 02, 2011, 09:34 PM
Faethor is offline
Find More Posts by Faethor
Registered User
Does that mean one additional linear servo, along with the two built on the RX? What're the control surfaces? A/E?

Jay
Old Feb 02, 2011, 09:53 PM
DynamicFoamy is offline
Find More Posts by DynamicFoamy
DynamicFoamy's Avatar
Quote:
Originally Posted by Faethor View Post
Does that mean one additional linear servo, along with the two built on the RX? What're the control surfaces? A/E?

Jay
Yes, one additional linear servo. Yes, A/E...

ACIES6400 (0 min 57 sec)
Site Sponsor
Latest blog entry: Customer Support Forum
Old Feb 03, 2011, 12:53 AM
Razors edge 29 is offline
Find More Posts by Razors edge 29
QuAd FaNaTiC
Razors edge 29's Avatar
Cool need any testers?
Old Apr 24, 2011, 09:19 PM
slyfoxflyer66 is offline
Find More Posts by slyfoxflyer66
You torquing to me?
slyfoxflyer66's Avatar
It says it uses the stock PZ prop, but its a pusher, how does that work?
Old Apr 24, 2011, 09:26 PM
Razors edge 29 is offline
Find More Posts by Razors edge 29
QuAd FaNaTiC
Razors edge 29's Avatar
i'd like to see more pics of this please
Old Apr 24, 2011, 09:37 PM
DynamicFoamy is offline
Find More Posts by DynamicFoamy
DynamicFoamy's Avatar
Quote:
Originally Posted by slyfoxflyer66 View Post
It says it uses the stock PZ prop, but its a pusher, how does that work?
Works good? screw the prop on from the front - then reverse the motor plug on the 6400 board.. the prop will be in pusher config and the motor spins in reverse.. Poooof its magic
Site Sponsor
Latest blog entry: Customer Support Forum
Old Apr 27, 2011, 09:58 PM
JohnM is offline
Find More Posts by JohnM
Lifetime Member
JohnM's Avatar
Quote:
Originally Posted by Razors edge 29 View Post
i'd like to see more pics of this please
I received my kit in the mail recently and will be posting some build pictures in the near future. I am planning on using the guts from a 4-site in it and Hyperion 160 mah cells. This should be a nice addition my my UM fleet.

John
Old Apr 28, 2011, 08:03 AM
Razors edge 29 is offline
Find More Posts by Razors edge 29
QuAd FaNaTiC
Razors edge 29's Avatar
Nice

Keep us posted





Quote:
Originally Posted by JohnM View Post
I received my kit in the mail recently and will be posting some build pictures in the near future. I am planning on using the guts from a 4-site in it and Hyperion 160 mah cells. This should be a nice addition my my UM fleet.

John
Old Apr 28, 2011, 07:16 PM
slyfoxflyer66 is offline
Find More Posts by slyfoxflyer66
You torquing to me?
slyfoxflyer66's Avatar
Received mine today, just one quick question. after seeing how the receiver and out board servo is setup im a bit curios towards what mixings are needed. can someone help me?
Old Apr 28, 2011, 08:48 PM
I R Irv is offline
Find More Posts by I R Irv
Registered User
I R Irv's Avatar
Quote:
Originally Posted by slyfoxflyer66 View Post
Received mine today, just one quick question. after seeing how the receiver and out board servo is setup im a bit curios towards what mixings are needed. can someone help me?
We need to see how the RX and out board servo is set up to answer this.
TODD
Old Apr 28, 2011, 09:49 PM
slyfoxflyer66 is offline
Find More Posts by slyfoxflyer66
You torquing to me?
slyfoxflyer66's Avatar
My camera is not cooperating so I will just explain it to you. the external servos is hooked up to 1 aileron then the rudder servo on the brick is hooked up to the other. the elevator servo is hooked up to the elevator
Old Apr 29, 2011, 03:01 PM
JohnM is offline
Find More Posts by JohnM
Lifetime Member
JohnM's Avatar
Quote:
Originally Posted by slyfoxflyer66 View Post
Received mine today, just one quick question. after seeing how the receiver and out board servo is setup im a bit curios towards what mixings are needed. can someone help me?
That is a very good question. After reviewing the instructions, one aileron is connected to the on board rudder servo and the other aileron is connected to the remote separate servo. That means that the rudder channel will need to be mixed out to be an aileron. I will need to figure this out before I install the RX and extra servo. I will post the mixing for a DX7, once I get it setup correctly on the bench.

John
Old Apr 29, 2011, 03:09 PM
JohnM is offline
Find More Posts by JohnM
Lifetime Member
JohnM's Avatar
Un-boxing...
The kit came well package in a flat cardboard box. The bag containing the depron sheet and other components was sealed in plastic and had a piece of cardboard to prevent damage. As such it arrived safely in the mail.

John
Old Apr 29, 2011, 03:14 PM
Razors edge 29 is offline
Find More Posts by Razors edge 29
QuAd FaNaTiC
Razors edge 29's Avatar
This thing needs a BL motor for more power
But the brushed motor looks like it moves this along fairly well.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
New Product NEW Dynamic Foamy F117 pusher Jet tc3wins Pusher Prop Jet Models 3 Dec 09, 2011 08:54 PM
Article 2DogRC Dynamic Foamy F-14 Pusher Jet Kit Review sun.flyer Pusher Prop Jet Models 7 Oct 10, 2009 02:23 PM
Question Anyone tried the Dynamic foamy A-10 pusher jet? FlyingLakland Pusher Prop Jet Models 2 Jul 29, 2009 09:52 AM
New Product Dynamic Foamy Mini Pusher Jet Series from 2dogrc 2dogrc Pusher Prop Jet Models 4 Apr 09, 2009 11:24 AM