Lumenier RB2205C-12 2400KV SKITZO Ceramic Bearing Motor
Thread Tools
This thread is privately moderated by Sandancer, who may elect to delete unwanted replies.
Old Feb 02, 2011, 02:25 AM
Sandancer is offline
Find More Posts by Sandancer
"Auntie Samantha"
Sandancer's Avatar
Build Log

B-25 Mitchell "TONDELAYO": The Wing mods.

Once again I had to get in there and change out all that fiberglass with Carbon Fiber.

First I cut to length the two .394 CF rods to replace the fiberglass wing spars.
Tip: I found that if I tapered the tips of the CF rods, they will slide into those wing clamps much better and with less friction.

Once I got the two spars cut and tapered, I proceeded to remove the flat fiberglass spar and replace it with .325 x .125 CF using GG as the bonding glue. Once the glue had dried I filled the seams with Squadron putty, sanded and re-painted the wings with a mix of MM Azure blue and white to match the blue underside of the wings and nacelles.
Sign up now
to remove ads between posts

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Found Hangar 9 or Top Flite B-25 Mitchell John Boy Aircraft - Electric - Airplanes (FS/W) 1 Oct 03, 2010 02:16 AM
Found Hangar 9 or Top Flite B-25 Mitchell John Boy Aircraft - Fuel - Airplanes (FS/W) 1 Sep 06, 2010 07:17 PM