Kaotic Robtics Multirotor Frames - RC Groups
Thread Tools
This thread is privately moderated by Kaotic Prezence, who may elect to delete unwanted replies.
Feb 02, 2011, 02:08 AM
Registered User

Kaotic Robtics Multirotor Frames

Hi all just wanted to let you all know that I am now starting to offer multirotor frames. I'm starting off offering Quad frames and will soon be offering Hexa and Octo frames along with stabilized camera mounts. I will update this blog as things progress. So now the offerings. First is a simple quad frame no electronics box...You can add your own CD Case top , Tupperware, or do what Kinderkram has done and find yourself one of those fancy surveillance camera domes and bolt it directly ontop. Second I will offer a frame plus electronics box with plenty of space to protect your expensive electronics. The frame and motor mounts are made out of expanded PVC it makes for a nice stiff but vibration dampening platform perfect for those sensitive accelerometers and smooth FPV/AV cameras. Arms can be ordered either in Aluminum or Carbon Fiber. I will include with any frame ordered two extra sets of motor mounts in case you have an accident. The simple frame version (frame, arms, and motor mounts) will be $65.00 with aluminum arms and $95.00 for protruded carbon fiber arms. And the full frame set the one including the electronics box will cost $125.00 for aluminum arm version and $140.00 for the protruded carbon fiber arms. This is all in US currency and shipping is not included. Until I get a steady order stream, frames will be made to order so please expect 3-5 day delay from day of ordering to day of shipping. I will request a 50% deposit on ordering and the remainder before shipping. Please feel free to PM with questions or better yet with an order.

Alex LeBrun
Sign up now
to remove ads between posts
Feb 02, 2011, 05:10 AM
OS Sponsor
kinderkram's Avatar

Glad you started this!

Thx Alex for making your tough and beautiful frame available for all Pirates of the Air!

How's the work on the landing gears and camera mount going?
Feb 02, 2011, 08:50 AM
DJI Support - 107 Certified
Tahoe Ed's Avatar
Alex what is your standard M2M distance?
Feb 02, 2011, 10:21 AM
Registered User
Kenpilot's Avatar
Subscribed. Will be following. Would like to add one of these to my fleet.

Feb 02, 2011, 06:05 PM
Registered User
Silver-Fox's Avatar
Looks very nice! Can you provide the motor motor distance and frame weight?

Also, if you want some East Coast Advertisement send one my way and I'd be happy to show it off for you!
Feb 02, 2011, 10:47 PM
Registered User
km28104's Avatar
Originally Posted by Silver-Fox
Looks very nice! Can you provide the motor motor distance and frame weight?

Also, if you want some East Coast Advertisement send one my way and I'd be happy to show it off for you!

I'll show them off in NC..
Feb 03, 2011, 12:51 AM
Registered User
Bah my bad I'll post up all the size and weight info tomorrow when I can weight it and give exact measurements. Sorry all I know how important all that is. Stay tuned!
Feb 03, 2011, 09:46 PM
jcooksey's Avatar
.i posted this on the DIY page.... I believe that i want one just like the first pic. I have started building my own desighn but built with plexyglass .Now while been waiting on parts from HK for a month I have had time to second guess my setup.I built the platform from the glass and used copter x 450 booms for arms( this is a tricopter).i have got atleast $280 invisted so far and think i might just sell everything and buy this kit. How much for that frame and control board. well how much for ready to fly where all i got to do is add my reciever,Thanks ..
Feb 04, 2011, 06:26 PM
Judging by the pictures I'd guess this can handle 10-12" props, which would mean it could certainly handle some payload, given large enough motors. I hope the camera mounts in progress are rather beefy (enough for a DSLR, perhaps?
Feb 05, 2011, 06:48 AM
Registered User
Can you add some video footage?
Feb 05, 2011, 12:20 PM
OS Sponsor
kinderkram's Avatar
Your frame was featured on Chris Anderson's DIYDrones blog:
Feb 14, 2011, 06:42 AM
OS Sponsor
kinderkram's Avatar

Outdoor Maiden Flight

Using Kaotix' Frame, Paul's Flyduino and Jussi's IMU on Alexinparis' MultiWii 1.6 code

MultiMega FlyduinoMega Freeflight IMU - Outdoor Maiden Flight (2 min 55 sec)
Aug 16, 2011, 03:14 PM
Registered User

Frames still available?

Are the airframes still available? Just wondering,
Aug 17, 2011, 11:09 AM
Registered User

Kaotic Robtics Multirotor Frames

Wondering the same thing myself. Are the frames still available?
Aug 31, 2011, 10:21 PM
Registered User
BrundleFly's Avatar
Hey... Where does someone find these beautiful frames? It's just what I've been looking for.

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Idea Multirotor Swarming & Collective Orders kinderkram Multirotor Drone Talk 788 Jan 18, 2014 11:39 AM
Discussion Who can write firmware to make heli flybarless controller for multirotor? helisfreak Multirotor Drone Talk 1 Jan 26, 2011 01:22 PM
Discussion Simulator for multirotor Jonkke Simulators 4 Dec 31, 2010 06:17 PM
Discussion selling PhotoshipOne mkTR quad/multirotor camera gimbal kookboy Multirotor Drone Talk 0 Nov 19, 2010 02:06 PM
Sold Western Robtics super bec/up to 14 cell lipo wing warrior Aircraft - Electric - Power Systems (FS/W) 1 Aug 09, 2010 08:58 PM