Thread Tools
Feb 24, 2011, 12:29 AM
Registered User
Quote:
Originally Posted by Goofy23
List for the production run (not startet now!).
-km28104
-blackmoon
Add me to the list, please.
Sign up now
to remove ads between posts
Feb 24, 2011, 12:30 AM
Registered User
Quote:
Originally Posted by fcharp
Add me to the list, please.
Actually, I'll have 2...
Feb 24, 2011, 02:23 AM
Friend is a 4 letter word...
JussiH's Avatar
Quote:
Originally Posted by mgros
Fantastic folding system, do you have detailed plans?
Hi Mariano

This is a design study prototype and far from perfect....so I wont make the plan for this one available.

There very soon will be a range of frames: From simple cheap plywood to all all-out folding frames for Quad, tri/Y6 and hexa.
Feb 24, 2011, 03:57 AM
Registered User
I am interested to buy a Flyduino and Jussi Freeflight IMU.Can anyone tell me where and how I go about doing this? Thanks, Andrew
Feb 24, 2011, 05:46 AM
Mark Harrison
Quote:
Originally Posted by mgros
This is the design of my new Flyduino Quad.

WMP and BMA020.

Still in development and assembly phase.
That is a nice frame... can you provide some details, especially on how the two arms are put together? I want to try something like this, but each time the very weak spot is the arm connection.

Thanks!!
Feb 24, 2011, 05:52 AM
DJI Supporter
Sid3ways's Avatar
I've got a frame sitting idle waiting for the Jussi board and this Flyduino. Waiting sucks.

Feb 24, 2011, 05:58 AM
Fly low!
Norf's Avatar
NICE ONE !!
Feb 24, 2011, 06:35 AM
Registered MisUser
whiteturbo's Avatar
Quote:
Originally Posted by Sid3ways
I've got a frame sitting idle waiting for the Jussi board and this Flyduino. Waiting sucks.

Nice! Details please
Feb 24, 2011, 07:02 AM
Registered User
Quote:
Originally Posted by Sid3ways
I've got a frame sitting idle waiting for the Jussi board and this Flyduino. Waiting sucks.
Especially that camera mount looks interesting. You designed it?
Feb 24, 2011, 07:08 AM
Registered User
Goofy23's Avatar
The list of the not begun production run
-km28104
-blackmoon
-ddmt
-pesargpop
- of course whiteturbo, sry ray
- sid3ways
- 2 flunki, Danke shipping sollte mit 4$ zu realiseren sein
- 2 mtbobo
- helicoblast
- 2 Speedysilver
- 2 fc sharp

@ sideways, your frame is beautifull, i will be proud to see a flyduino on such a nice frame.
I hope i have the betas here at the end of next week.
It all takes his time, but its all started so just have a little patience.

@ wearypanda
for the flyduino we need a beta test which is allready on its way, afterward there will be a production run.
At the moment the flyduino can be pre-ordered here in this thread for the production run.

For everyone who wants on this early preorder list, simply put yourself on it, thx.
Feb 24, 2011, 08:29 AM
DJI Supporter
Sid3ways's Avatar
I can't wait either.

The frame is from Sergey at: http://www.rc-carbon.com/aerial-photo-video-c-36.html

His frames are literally works of art. The carbon arms are so strong it is almost a joke. He actually adds carbon trusses inside the carbon arms to reinforce them. I guarantee the bolt would break off before you could crush the arms tightening them down. The GoPro mount is also a work of art, high quality ball bearings everywhere and full isolation.

Don't want to take the thread too far off topic, check out the link. I can't wait to fly it. I'll be running The Flyduino with a WMP to start then Jussi's board when he has them offered.
Feb 24, 2011, 08:34 AM
Registered User
put me on the production list, please. I have no idea how to put myself on it.
Feb 24, 2011, 08:57 AM
http://drone-pilot.blogspot.fr
lovegroove's Avatar
Quote:
Originally Posted by Sid3ways
I can't wait either.

The frame is from Sergey at: http://www.rc-carbon.com/aerial-photo-video-c-36.html

His frames are literally works of art. The carbon arms are so strong it is almost a joke. He actually adds carbon trusses inside the carbon arms to reinforce them. I guarantee the bolt would break off before you could crush the arms tightening them down. The GoPro mount is also a work of art, high quality ball bearings everywhere and full isolation.

Don't want to take the thread too far off topic, check out the link. I can't wait to fly it. I'll be running The Flyduino with a WMP to start then Jussi's board when he has them offered.
That's the second time I've seen that frame today. Also available here:

http://rchobbyhelicopter.com/

and here:

http://www.maximus-racing.com/fr/max...rs/rcc-y6.html
Feb 24, 2011, 01:59 PM
Registered User
mgros's Avatar
Quote:
Originally Posted by marhar
That is a nice frame... can you provide some details, especially on how the two arms are put together? I want to try something like this, but each time the very weak spot is the arm connection.

Thanks!!
I show you how I've put toghether arms.

Iv glued both arms with NURAL 27, ann surely I wiil glue also the aluminum plate, in order to mke the union strong.

I'm going to do a sandwich with aluminum plate/viscolastic foam/ sensors/ viscolastic foam/ flyduino.
Feb 24, 2011, 06:15 PM
Registered User
Goofy23's Avatar
The list of the not begun production run
-km28104
-blackmoon
-ddmt
-pesargpop
- of course whiteturbo, sry ray
- sid3ways
- 2 flunki, Danke shipping sollte mit 4$ zu realiseren sein
- 2 mtbobo
- helicoblast
- 2 Speedysilver
- 2 fc sharp
- fcharp

Mariano, this looking very promissing and you seems to know the materials you use very well, there is the engineer speaking.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
New Product Please let me introduce myself jimaquo Dock Talk 7 Oct 27, 2010 02:27 AM
Let me introduce the DEMON!!!! (Transparent covering and eliptical wing!!!) modest-master Sport Planes 7 Aug 25, 2002 11:46 PM
Let me introduce Angelis 280/400, Benjamin, Zombi (ARFs) modest-master Parkflyers 17 Mar 14, 2002 01:20 PM
Let me introduce the "NIKE" modest-master Electric Sailplanes 3 Mar 07, 2002 05:20 AM