Flyduino Mega , a Multiwii/Ardupirates/Aeroquad based aerial video platform FC - Page 46 - RC Groups
Thread Tools
May 21, 2011, 03:55 PM
Registered User
Goofy23's Avatar
Yes its able to handle 3 and 4s directly on the in pin.
Good news the new GPS Bob´s are here and the Sensor and Power Bob is on the way to me, lets hope they will be fine.
Sign up now
to remove ads between posts
May 21, 2011, 04:24 PM
Fly low!
Norf's Avatar
Hi,

new FlyduSpider Video.

Hope you like it.

FlyduSpider Fun Fly (3 min 22 sec)


Norbert
May 21, 2011, 04:37 PM
Registered User
Goofy23's Avatar
Great Norf, as i said golden thumbs.
May 22, 2011, 12:54 PM
DJI Support - 107 Certified
Tahoe Ed's Avatar
I have been so busy at work I have had no time to play with my toys. I am assembling the Flyduino and I have a FFIMU from Jussi, v1.1. I looked at Berkley's wiring and what he shows is a connection through a sparkfun LLC. Is this correct? I thought I would check before I blew something up.

Note: Jussi bridged the En and Pwr, option "a" on berkley's diagram. If I disable the internal pullups in the Alex's code, can I run the FFIMU directly off the I2C without the LLC? It is amazing how quickly this stuff gets away from you. Thanks for the help.
Last edited by Tahoe Ed; May 22, 2011 at 02:04 PM.
May 22, 2011, 01:35 PM
Registered User
M4d_D's Avatar
hi,
do you think this board will work ?
http://cgi.ebay.de/HMC5883L-BMA180-B...item3cb81408b0

when will the gps bobs be available ?

what do you think about this board : http://cgi.ebay.de/HMC5883L-BMA180-B...item3cb6e39dab

cheers
May 22, 2011, 03:50 PM
OS Sponsor
kinderkram's Avatar
Quote:
Originally Posted by M4d_D
hi,
do you think this board will work ?
http://cgi.ebay.de/HMC5883L-BMA180-B...item3cb81408b0

when will the gps bobs be available ?

what do you think about this board : http://cgi.ebay.de/HMC5883L-BMA180-B...item3cb6e39dab

cheers
To find out if the first one will work you need to buy and test it - or wait until someone else is doing it.

Pirates recommend Pirates' products btw.
That's why I rather point at Jussi's FFIMU:
https://www.rcgroups.com/forums/show....php?t=1358869
http://ffimu.org/blog/
May 22, 2011, 04:08 PM
Registered User
Gaza07's Avatar
The first one is being altered If I read it right to work from I2C or Uart (serial)
the second one will work fine and is used by a few people already

Quote:
Originally Posted by M4d_D
hi,
do you think this board will work ?
http://cgi.ebay.de/HMC5883L-BMA180-B...item3cb81408b0

when will the gps bobs be available ?

what do you think about this board : http://cgi.ebay.de/HMC5883L-BMA180-B...item3cb6e39dab

cheers
May 22, 2011, 04:14 PM
Registered User
M4d_D's Avatar
Quote:
Originally Posted by kinderkram
To find out if the first one will work you need to buy and test it - or wait until someone else is doing it.

Pirates recommend Pirates' products btw.
That's why I rather point at Jussi's FFIMU:
https://www.rcgroups.com/forums/show....php?t=1358869
http://ffimu.org/blog/
please post a link which says " buy " or " add to cart "
or do i just have to ask jussi ? how much does his board cost ?
May 22, 2011, 04:31 PM
OS Sponsor
kinderkram's Avatar
Quote:
Originally Posted by M4d_D
please post a link which says " buy " or " add to cart "
or do i just have to ask jussi ? how much does his board cost ?
Either send him a PM or - if you need a button - go here:
http://www.viacopter.eu/index.php?pa...mart&Itemid=53
May 22, 2011, 04:38 PM
Registered User
M4d_D's Avatar
Quote:
Originally Posted by kinderkram
Either send him a PM or - if you need a button - go here:
http://www.viacopter.eu/index.php?pa...mart&Itemid=53
ich glaub ich benutz den knopf
May 22, 2011, 04:41 PM
Registered User
the ebay imu work apparently(siberian)!on top of that it contents exactly the same sensors that ffimu so i don t see why it will doesn t work!
only the gps version need to be test
May 22, 2011, 04:48 PM
OS Sponsor
kinderkram's Avatar
Quote:
Originally Posted by M4d_D
ich glaub ich benutz den knopf
Mach ich auch am liebsten.
Aber Email & PayPal is auch ne sichere Sache. Und Jussi steht zu seinen Produkten. Die "Alternative" erschien plötzlich bei Ebay, nachdem die Entwicklung der FFIMU abgeschlossen war. Ein Schelm, wer böses dabei denkt...

Pirates stand for their products. If it's crap - throw it back!
You'll get your bucks or a new one in return.

Jussi and Paul developed their boards in the open. And they fully support not only their products but also the people who develop code for it.
The alternative "AllinOne" suddenly appeared on Ebay after the development of the FFIMU was finished...
May 22, 2011, 05:00 PM
Registered User
Gaza07's Avatar
Maybe it would also be fair to point out that your main coder uses 2 allinone boards
May 22, 2011, 05:42 PM
Registered User
yes kinderkram i agree the ebay version is a copy of the ffimu!but it s already better to have more seller who sell the same imu because if one is out of stock you can buy it with the other
what a pitty that jussi and paul have not a webshop that we can order directly
May 22, 2011, 05:59 PM
Registered User
bob4432's Avatar
Quote:
Originally Posted by titeuf007
yes kinderkram i agree the ebay version is a copy of the ffimu!but it s already better to have more seller who sell the same imu because if one is out of stock you can buy it with the other
what a pitty that jussi and paul have not a webshop that we can order directly
jussi website/webshop is www.viacopter.eu, paul has one too, let me look it up...

pauls (goofy23) site/shop - http://www.flyduino.com/


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
New Product Please let me introduce myself jimaquo Dock Talk 7 Oct 27, 2010 03:27 AM
Let me introduce the DEMON!!!! (Transparent covering and eliptical wing!!!) modest-master Sport Planes 7 Aug 26, 2002 12:46 AM
Let me introduce Angelis 280/400, Benjamin, Zombi (ARFs) modest-master Parkflyers 17 Mar 14, 2002 02:20 PM
Let me introduce the "NIKE" modest-master Electric Sailplanes 3 Mar 07, 2002 06:20 AM