Thread Tools
Old May 02, 2012, 01:30 PM
robert b is online now
Find More Posts by robert b
Registered User
Quote:
Originally Posted by kinderkram View Post
Yah, 32bit will be the future. And believe me: Paul is prepared for that future.

Now that you own a Naze32 - what's the differences compared to the ancient 8bitters?
I mean ... does it fly any better? Is it more stable? More features?
you run out of cpu cycles when applying the correct sensor fusion algorythm.
Sign up now
to remove ads between posts
Old May 03, 2012, 02:21 PM
ndfly700 is offline
Find More Posts by ndfly700
RCGroups Heli Editor
ndfly700's Avatar
great video Markus!
seems it would be hard to fly with all those bugs flying around my head like that. You truly are a pro when you can fly like that as well as swat bugs at the same time

Quote:
Originally Posted by warthox View Post
flydumini with mt1306 motors

http://vimeo.com/41373848
RCG Plus Member
Old May 04, 2012, 09:56 AM
warthox is offline
Find More Posts by warthox
Registered User
Quote:
Originally Posted by ndfly700 View Post
great video Markus!
seems it would be hard to fly with all those bugs flying around my head like that. You truly are a pro when you can fly like that as well as swat bugs at the same time
thanks
a good protein snack for in between
Old May 04, 2012, 11:47 AM
Goofy23 is offline
Find More Posts by Goofy23
Registered User
Goofy23's Avatar
Even without protein, you are better then most other pilots.
some info, we got a full range of full Cf Propellers in the Shop.

http://flyduino.net/Propeller
Old May 05, 2012, 04:25 AM
melilla is offline
Find More Posts by melilla
location: Almeria Spain
melilla's Avatar

flyduino mega and freeimu v0.4.3


Hello sorry for my ignorance, I am using multiwii platform with mega flyduino and freeimu v0.4.3.
The pullups are enabled or you have to activate them.
Can you tell me if this is what needs to be welded to activate.
Old May 05, 2012, 06:54 AM
melilla is offline
Find More Posts by melilla
location: Almeria Spain
melilla's Avatar
is well connected or do I have to solder the bridge
Last edited by melilla; May 05, 2012 at 07:17 AM.
Old May 05, 2012, 02:09 PM
Goofy23 is offline
Find More Posts by Goofy23
Registered User
Goofy23's Avatar
its all fine pullupson the freeimu are activated by default.
Old May 05, 2012, 02:26 PM
melilla is offline
Find More Posts by melilla
location: Almeria Spain
melilla's Avatar
Goofy23 thank you very much
Old May 08, 2012, 06:01 AM
Trenjeska is offline
Find More Posts by Trenjeska
Registered User
Quote:
Originally Posted by Goofy23 View Post
i really hope i less then 2 weeks, sry, did my best but cant change it.
Perhaps add a link to the 90 degree 3-row pinheaders while you are at it.
I soldered on the supplied pinheaders and later found out about the much more convenient angled pinheaders :P
Old May 08, 2012, 11:22 AM
kinderkram is offline
Find More Posts by kinderkram
OS Sponsor
kinderkram's Avatar
Quote:
Originally Posted by Trenjeska View Post
Perhaps add a link to the 90 degree 3-row pinheaders while you are at it.
I soldered on the supplied pinheaders and later found out about the much more convenient angled pinheaders :P
Depends on how much room you have left on the center plates. Those rectangles need more space in the horizontal while the upright need more room on the top.
Old May 09, 2012, 06:46 AM
Guntars is offline
Find More Posts by Guntars
Registered User
I have Flyduiono Mega board and want to try multiwii (have NAZA, ARDUCOPTER and KK). I am interested in acro and level flight. I want to use drotek sensors.
So the question – is MPU-6050 well supported in wultiwii code of should i use old IGT 3200? Is the drotek board just plug and play (uncomment in code and tune)?
Old May 09, 2012, 07:50 AM
Trenjeska is offline
Find More Posts by Trenjeska
Registered User
Quote:
Originally Posted by Guntars View Post
I have Flyduiono Mega board and want to try multiwii (have NAZA, ARDUCOPTER and KK). I am interested in acro and level flight. I want to use drotek sensors.
So the question is MPU-6050 well supported in wultiwii code of should i use old IGT 3200? Is the drotek board just plug and play (uncomment in code and tune)?
I have the drotek 6050 sensorbob connected to a flyduino mega with multiwii 2.0 here. And it is pretty straght forward. sensor works well. do use the multiwii default address of D2 in stead of the 69 mentioned on the drotek site. And either add #undef INTERNAL_I2C_PULLUPS to the drotek section in def.h or uncomment the defenition this line undefines.
Old May 09, 2012, 09:14 AM
Katch is offline
Find More Posts by Katch
FC flux'd
Katch's Avatar
Quote:
Originally Posted by Guntars View Post
I have Flyduiono Mega board and want to try multiwii (have NAZA, ARDUCOPTER and KK). I am interested in acro and level flight. I want to use drotek sensors.
So the question is MPU-6050 well supported in wultiwii code of should i use old IGT 3200? Is the drotek board just plug and play (uncomment in code and tune)?
MPU6050 has a bug in the LPF in MWC 2.0 that has now been fixed in the latest dev version.

The MPU6050 is an awesome sensor - gives some of the cleanest signals I've seen out of any IMU.
Old May 09, 2012, 10:17 AM
Guntars is offline
Find More Posts by Guntars
Registered User
Thank you Trenjeska and Katch. Did anyone use this 6050? Just bought drotek sensor!
Last edited by Guntars; May 10, 2012 at 04:19 AM.
Old May 10, 2012, 12:08 PM
Goofy23 is offline
Find More Posts by Goofy23
Registered User
Goofy23's Avatar
this 6050 works fine too
http://flyduino.net/MPU6050-Break-Out-onboard-33V-reg

The Arms are back in stock, mega is back next week.
Now CNC milled and powder coated.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
New Product Please let me introduce myself jimaquo Dock Talk 7 Oct 27, 2010 03:27 AM
Let me introduce the DEMON!!!! (Transparent covering and eliptical wing!!!) modest-master Sport Planes 7 Aug 26, 2002 12:46 AM
Let me introduce Angelis 280/400, Benjamin, Zombi (ARFs) modest-master Parkflyers 17 Mar 14, 2002 02:20 PM
Let me introduce the "NIKE" modest-master Electric Sailplanes 3 Mar 07, 2002 06:20 AM