Flyduino Mega , a Multiwii/Ardupirates/Aeroquad based aerial video platform FC - Page 155 - RC Groups
Shop our Airplanes Products Drone Products Sales
Thread Tools
Oct 21, 2011, 06:58 PM
Registered User
Goofy23's Avatar
thnaks max 5", tihs version is Multiwii dedicated i like the fact to integrate all multiwii necessary in tihs tight space and the people know it well and have some components, but....maybe later.
Sign up now
to remove ads between posts
Oct 21, 2011, 09:25 PM
Registered User
Goofy23's Avatar
quadframes are back in stock only the spider needs a bit, a new gps will be stocked too on weekend.
Oct 22, 2011, 08:41 AM
Registered User
M4d_D's Avatar
hi paul , the frame looks good .will you offer motors for the flydumini as well or can you tell us which motors norf uses ?
Oct 22, 2011, 12:51 PM
Registered User

ROXXY Motors


Hy Paul, which Motor is ok for the flydumini

Abmessung Gewicht U/Volt Zellen Luftschraube 1/min Strom Schub
ROXXY BL-Outrunner 1815/17 18 x 21 mm 13g 2900 2 5,0 x 3,0 GWS-HD 13241 4,6 A 162 g
ROXXY BL-Outrunner 1815/25 18 x 21 mm 13g 2000 2 5,0 x 3,0 GWS-HD 10487 2,1 A 101 g
ROXXY BL Outrunner 1820/10 18 x 26 mm 18g 2520 2 5,0 x 3,0 GWS-HD 13646 4,3 172 g
ROXXY BL Outrunner 1820/12 18 x 26 mm 18g 2120 2 5,0 x 3,0 GWS-HD 12173 3,1 137 g
ROXXY BL Outrunner 2216/18 22 x 23 mm 19g 2570 2 5,0 x 3,0 GWS-HD 12375 3,1 142 g

Michael
Oct 22, 2011, 02:10 PM
Registered User
M4d_D's Avatar
der erste hört sich gut an wobei der ne ziemlich hohe drehzahl/V hat

i like the fiorst one from this list .... or maybe the second one since the kV is lower


what do you guys think ?
Oct 22, 2011, 03:23 PM
Registered User
Goofy23's Avatar
laut Lehrbuch wohl
ROXXY BL Outrunner 1820/12 18 x 26 mm 18g 2120 2 5,0 x 3,0 GWS-HD 12173 3,1 137 g
for 5" props.
Norf uses A1510, can stock them no problem, but we still have to test, next time i bulid a black mini i will try Hextronik 10g, will see, something in this range will fit.
Roxxy is for sure a good choice, but a bit too pricey for most i think.
Oct 22, 2011, 03:28 PM
OS Sponsor
kinderkram's Avatar
Hmmm ... they're small, light and they're Roxxys.
But 30 Euros each for a Mini indoor flyer?

I have some cheap Hextroniks laying around. Think I'll give them a try...



http://www.hobbyking.com/hobbyking/s...er_1300kv.html
Oct 22, 2011, 03:39 PM
Registered User
M4d_D's Avatar
whick kv rating will you choose with the 10g hextronik ? 1500? 1800? 2000?
Oct 22, 2011, 03:48 PM
OS Sponsor
kinderkram's Avatar
Quote:
Originally Posted by M4d_D
whick kv rating will you choose with the 10g hextronik ? 1500? 1800? 2000?
I think HK only has 2000kV/10gr, 1700kV/16gr, 1300kV/24gr
Oct 22, 2011, 03:50 PM
Registered User
Goofy23's Avatar
2000 as i think you will need it for 5" and 2S but the best setup still have to be found i think.
Norbert if it only 1300kv you may should go at least 3s i think and even that will be a bit low for 5".
Oct 22, 2011, 04:11 PM
Registered User
M4d_D's Avatar
i looked at the HK homepage and i think these motors might work....

please have a look at them :


the turnigy 10g and the hextronik 10g motors look quite similar.... you are right , there is only a 2000kv hextronik 10g

the 24g 1300kv work great on 3s with 8x4 ( 8x4.5 is too much ) but for 5" there are other higher kv motors ... i dont think the 1300kv will work with 5" props
Oct 22, 2011, 04:27 PM
OS Sponsor
kinderkram's Avatar
Warthox will try the Turnigy 1811 2000kV (second in your list), Paul the HT 10g 2000kV and I'll try the HT 24g 1300kV.
We'll have a good comparison then. I'll take some 2s lipos first.
My poor plants need time for recreation.
Oct 22, 2011, 04:48 PM
Registered User
M4d_D's Avatar
looking forward to your results
Oct 23, 2011, 06:46 AM
OS Sponsor
kinderkram's Avatar
Quote:
Originally Posted by M4d_D
looking forward to your results
Me too!

Guess I'll have to wait a bit until I have all parts here.
Especially 5" props are not easy to find...
Oct 23, 2011, 06:58 AM
Registered User
M4d_D's Avatar
HK has some 5" props but i dont know if they are in stock


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
New Product Please let me introduce myself jimaquo Dock Talk 7 Oct 27, 2010 03:27 AM
Let me introduce the DEMON!!!! (Transparent covering and eliptical wing!!!) modest-master Sport Planes 7 Aug 26, 2002 12:46 AM
Let me introduce Angelis 280/400, Benjamin, Zombi (ARFs) modest-master Parkflyers 17 Mar 14, 2002 02:20 PM
Let me introduce the "NIKE" modest-master Electric Sailplanes 3 Mar 07, 2002 06:20 AM