Thread Tools
Old Mar 03, 2011, 11:42 PM
Goofy23 is offline
Find More Posts by Goofy23
Registered User
Goofy23's Avatar
The list of the not begun production run
- km28104
- blackmoon
- ddmt
- pesargpop
- of course whiteturbo, sry ray
- sid3ways
- 2 flunki, Danke shipping sollte mit 4$ zu realiseren sein
- 2 mtbobo
- helicoblast
- 2 Speedysilver
- 2 fcharp
- Ivanhoes
- 5 kinderkram
- robjames
- 2 nige
- 2 va3mw
- siberian
- JanHenning
- tc3wins
- easystall
- alll
- 2 alteskind
- 2 cglusky
- Hogster
- Doron
- Geni , dafür nich
- Tycho, it think you will one of the first who will get it (same city)
- AloutteIII


For the Beta, sorry, till now i have no news, but i am sure he have everything there and is working on it.
Please excuse the delay, i hope we have the beta soon.
Sign up now
to remove ads between posts
Old Mar 06, 2011, 04:14 PM
Goofy23 is offline
Find More Posts by Goofy23
Registered User
Goofy23's Avatar
One update from my manufactorer.
He didnt forget us, he said he had a festive period the last four days which caused the delay.
Sorry to all who are wainting, but i am happy i know he is working on it, and he is a hard working guy, so a little festive period should be allowed for him.
Tomorrow he promissed to send some pictures.
Old Mar 06, 2011, 07:52 PM
3rdeyepro is offline
Find More Posts by 3rdeyepro
Hovership
3rdeyepro's Avatar
I want in on the production run!
Old Mar 06, 2011, 08:02 PM
Goofy23 is offline
Find More Posts by Goofy23
Registered User
Goofy23's Avatar
i recommend to solder a extension like this for the flyduino
its easily made out of male female pinheaders.
Or solder some servo cables directly to the pins on the bottom of the FTDI.
Old Mar 06, 2011, 08:03 PM
Goofy23 is offline
Find More Posts by Goofy23
Registered User
Goofy23's Avatar
The list of the not begun production run
- km28104
- blackmoon
- ddmt
- pesargpop
- of course whiteturbo, sry ray
- sid3ways
- 2 flunki, Danke shipping sollte mit 4$ zu realiseren sein
- 2 mtbobo
- helicoblast
- 2 Speedysilver
- 2 fcharp
- Ivanhoes
- 5 kinderkram
- robjames
- 2 nige
- 2 va3mw
- siberian
- JanHenning
- tc3wins
- easystall
- alll
- 2 alteskind
- 2 cglusky
- Hogster
- Doron
- Geni , dafür nich
- Tycho, it think you will one of the first who will get it (same city)
- AloutteIII
- 3rdeyepro
Old Mar 06, 2011, 10:15 PM
whiteturbo is offline
Find More Posts by whiteturbo
Registered MisUser
whiteturbo's Avatar
Quote:
Originally Posted by Goofy23 View Post
One update from my manufactorer.
He didnt forget us, he said he had a festive period the last four days which caused the delay.
Sorry to all who are wainting, but i am happy i know he is working on it, and he is a hard working guy, so a little festive period should be allowed for him.
Tomorrow he promissed to send some pictures.

Sounds like he fell off the wagon and i hope the pictures arn't of him having a festive time when WE are all waiting for our Flyduino's! come on mate back to work and put your back into it cuzz we are getting impatient and want our new toys
Old Mar 06, 2011, 10:45 PM
Goofy23 is offline
Find More Posts by Goofy23
Registered User
Goofy23's Avatar
good description, i really hope this didnt happen in real life
I know Ray i am also a little impatient, but i cant change it, at least i am happy its going its way.
All Parts are there (since over one week), i am eagerly awaiting some pics of the pcb even if they are still unpopulated
Old Mar 07, 2011, 08:37 AM
whiteturbo is offline
Find More Posts by whiteturbo
Registered MisUser
whiteturbo's Avatar
Quote:
Originally Posted by Goofy23 View Post
i recommend to solder a extension like this for the flyduino
its easily made out of male female pinheaders.
Or solder some servo cables directly to the pins on the bottom of the FTDI.
Hi Paul,

You only have five of the six cables connected, the end one (GND) seems to be jumpered/shorted to the CTS, is that right? i assume thats because the flyduino only has five pins for FTDI.
Old Mar 07, 2011, 10:29 AM
Goofy23 is offline
Find More Posts by Goofy23
Registered User
Goofy23's Avatar
You can also take another wire, but you dont need it CTS isnt used its connected to GND, so one wire will be enough.
I shortened GND and CTS on both sides, but one side should be enough too EDIT (CTS to GND on Flyduino side) (of course).
Last edited by Goofy23; Mar 08, 2011 at 02:24 PM.
Old Mar 07, 2011, 12:07 PM
nio is offline
nio
Find More Posts by nio
nio
Registered User
Paul, add me to the production list....

Thank you in advance...
Old Mar 07, 2011, 12:13 PM
3rdeyepro is offline
Find More Posts by 3rdeyepro
Hovership
3rdeyepro's Avatar
Can 2 of the outputs be used to control nick/roll servo for a camera mount?
Old Mar 07, 2011, 01:28 PM
Alexinparis is offline
Find More Posts by Alexinparis
Registered User
Alexinparis's Avatar
Quote:
Originally Posted by 3rdeyepro View Post
Can 2 of the outputs be used to control nick/roll servo for a camera mount?
yes
Old Mar 07, 2011, 04:34 PM
Goofy23 is offline
Find More Posts by Goofy23
Registered User
Goofy23's Avatar
The list of the not begun production run
- km28104
- blackmoon
- ddmt
- pesargpop
- of course whiteturbo, sry ray
- sid3ways
- 2 flunki, Danke shipping sollte mit 4$ zu realiseren sein
- 2 mtbobo
- helicoblast
- 2 Speedysilver
- 2 fcharp
- Ivanhoes
- 5 kinderkram
- robjames
- 2 nige
- 2 va3mw
- siberian
- JanHenning
- tc3wins
- easystall
- alll
- 2 alteskind
- 2 cglusky
- Hogster
- Doron
- Geni , dafür nich
- Tycho, it think you will one of the first who will get it (same city)
- AloutteIII
- 3rdeyepro
- nio

He mailed me today, he forgot the bottom print but fix it today.
Tomorrow he promissed to populate the betas.
He also promissed some picture later today but nothing came till now.
I hope he will send some pics of the Flyduinos tomorrow and hope those will be allready poulated ones
Old Mar 08, 2011, 12:50 AM
johsch is offline
Find More Posts by johsch
Registered User
Hi

Add me to the list as well.

/Johan
Old Mar 08, 2011, 02:33 AM
Goofy23 is offline
Find More Posts by Goofy23
Registered User
Goofy23's Avatar
The list of the not begun production run
- km28104
- blackmoon
- ddmt
- pesargpop
- of course whiteturbo, sry ray
- sid3ways
- 2 flunki, Danke shipping sollte mit 4$ zu realiseren sein
- 2 mtbobo
- helicoblast
- 2 Speedysilver
- 2 fcharp
- Ivanhoes
- 5 kinderkram
- robjames
- 2 nige
- 2 va3mw
- siberian
- JanHenning
- tc3wins
- easystall
- alll
- 2 alteskind
- 2 cglusky
- Hogster
- Doron
- Geni , dafür nich
- Tycho, it think you will one of the first who will get it (same city)
- AloutteIII
- 3rdeyepro
- nio
- johsch


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
New Product Please let me introduce myself jimaquo Dock Talk 7 Oct 27, 2010 03:27 AM
Let me introduce the DEMON!!!! (Transparent covering and eliptical wing!!!) modest-master Sport Planes 7 Aug 26, 2002 12:46 AM
Let me introduce Angelis 280/400, Benjamin, Zombi (ARFs) modest-master Parkflyers 17 Mar 14, 2002 02:20 PM
Let me introduce the "NIKE" modest-master Electric Sailplanes 3 Mar 07, 2002 06:20 AM