Shop our Airplanes Products Drone Products Sales
Thread Tools
Old Aug 17, 2011, 12:44 PM
pbw is offline
pbw
Find More Posts by pbw
pbw
arachnida
pbw's Avatar
Paul, please keep the name! I was only joking but do like all the reactions on the subject!

And next project make a five legged multikopter, I don't know any animal with five legs!
Last edited by pbw; Aug 17, 2011 at 12:44 PM. Reason: Typo
Sign up now
to remove ads between posts
Old Aug 17, 2011, 05:57 PM
jevermeister is offline
Find More Posts by jevermeister
Registered User
jevermeister's Avatar
Quote:
i think the Flyduspider stays the Flyduspider, it s a unique name, at least, and most copter fliers are no biologist i think.
Me likes that!!!!!

Paul, are you planning a Sensor Bob that can take the WM+, the BMA020, a magnetometer and a baro?

My selfmade stuff really sucks...

Nils
Old Aug 17, 2011, 06:28 PM
st99 is offline
Find More Posts by st99
Registered User
st99's Avatar

Fast shipping


Quote:
Originally Posted by Goofy23 View Post
i think the Flyduspider stays the Flyduspider, it s a unique name, at least, and most copter fliers are no biologist i think.
Hey Paul,
Just received my flyduspider frame today. Wow.!!! That some super fast shipping to Pennsylvania.

I ordered (in stock) 7 plush esc's from HK, at the same time that I ordered the frame from you, and the ESC's have not came yet.

The quality of thoes frames are super.!!------- really happy about that.
Well, off to lowe's or home depot to get some aluminum square for the legs.

Thanks,
st99
Old Aug 17, 2011, 07:26 PM
alteskind is offline
Find More Posts by alteskind
Registered User
Quote:
Originally Posted by jevermeister View Post
Me likes that!!!!!

Paul, are you planning a Sensor Bob that can take the WM+, the BMA020, a magnetometer and a baro?

My selfmade stuff really sucks...

Nils
i am going to put my 4 sensors to the good old flydusense sensor bob.

in order to get some more room i will cut my wmp-clone and maybe even hook up the itg3205 to the bma020 as juergen did https://www.rcgroups.com/forums/member.php?u=290153

allinone IMUs are not expensive anymore, but i like the option of changing single sensors if necessary or wanted
Old Aug 17, 2011, 10:15 PM
Goofy23 is offline
Find More Posts by Goofy23
Registered User
Goofy23's Avatar
many thanks ST99.

To ad more sensors is allready possible, but hm may in a new version, dont have any Sparkfun sensors here, will see.

I put the Flydusense V2 in the shop.




It will include a vibration dampening a LLC, a LED driver and a voltage divider.
All parts needed will be suplied.

One important note:
when you want to use the led driver and voltage divider features you have to mod a bit, sorry, its really a eagle mistake the file was edited, but the gerber export took for some unknown reasons the old version.

cut the traces as showen and solder a cable.
This is just if you want to use the voltage divider or led driver, if not no mod is needed!
The LLC works great as the sensors does.
All parts will be suplied.


This picures are showing the SMD leds mounted.




I took 3 blue one on the front with 200ohm (for directly 3s), in the back i took 2 red ones, the pad named LED is the in for the rear leds, will be good to connect a cpu pin to it, like the stable led or the low batt warning.
I took 180ohm (for the 5v directly from the arduino, dont draw too much here!), but less would good too, only had those 180 ohm.
Take a led calculator for your led to get the right resistor for your led.
1206 SMD type is used.
Last edited by Goofy23; Aug 18, 2011 at 12:37 AM.
Old Aug 18, 2011, 01:27 AM
aBUGSnightmare is offline
Find More Posts by aBUGSnightmare
Registered User
Hi Paul,

really nice work! The new BOB would form a nice stack with the MWC board too!

aBUGSworstnightmare

Quote:
Originally Posted by Goofy23 View Post
many thanks ST99.

To ad more sensors is allready possible, but hm may in a new version, dont have any Sparkfun sensors here, will see.

I put the Flydusense V2 in the shop.




It will include a vibration dampening a LLC, a LED driver and a voltage divider.
All parts needed will be suplied.

One important note:
when you want to use the led driver and voltage divider features you have to mod a bit, sorry, its really a eagle mistake the file was edited, but the gerber export took for some unknown reasons the old version.

cut the traces as showen and solder a cable.
This is just if you want to use the voltage divider or led driver, if not no mod is needed!
The LLC works great as the sensors does.
All parts will be suplied.


This picures are showing the SMD leds mounted.




I took 3 blue one on the front with 200ohm (for directly 3s), in the back i took 2 red ones, the pad named LED is the in for the rear leds, will be good to connect a cpu pin to it, like the stable led or the low batt warning.
I took 180ohm (for the 5v directly from the arduino, dont draw too much here!), but less would good too, only had those 180 ohm.
Take a led calculator for your led to get the right resistor for your led.
1206 SMD type is used.
Old Aug 18, 2011, 02:15 AM
Galumbo is offline
Find More Posts by Galumbo
Able to learn fly
Quote:
Originally Posted by pbw View Post
Paul, please keep the name! I was only joking but do like all the reactions on the subject!

And next project make a five legged multikopter, I don't know any animal with five legs!
An elephant!!! -> Flyduphant

Enought with the jokes about the name.
I think Flyduspider is good and unique.

Regards
Heiko
Old Aug 18, 2011, 09:02 AM
whiteturbo is offline
Find More Posts by whiteturbo
Registered MisUser
whiteturbo's Avatar
Paul my friend,

We now have a round flydusense, does that mean we will be getting a round Flyduino Mega and a round Flydubution so that we can have a really cool Round stack

Ray(wants to go round)
Old Aug 18, 2011, 09:19 AM
jevermeister is offline
Find More Posts by jevermeister
Registered User
jevermeister's Avatar
Quote:
We now have a round flydusense, does that mean we will be getting a round Flyduino Mega and a round Flydubution so that we can have a really cool Round stack
Cookies!!!

I would prefer a squared stack, I don't know if it is economical for Paul to offer both long term but i think squared is more practical in ways of ataching other electronic components near it etc.

Nils
Old Aug 18, 2011, 10:11 AM
Goofy23 is offline
Find More Posts by Goofy23
Registered User
Goofy23's Avatar
thanks ray, nils said it, i dont think i will change the Flyduino it will stay square.
for the sonsors i needed a little more space so the round design was a good option, also it can be rotated 45degree now, which isnt necessary for the Mega.
A Powerbob, good idea, its possible, but what i dislike a bit it will add unecessary weight.
I will continue to offer both versions, but to make it a bit easier, i consider removing the llc from V1 and may only offer the V2 with LLC, not sure.
Old Aug 18, 2011, 12:21 PM
whiteturbo is offline
Find More Posts by whiteturbo
Registered MisUser
whiteturbo's Avatar
pity, but i think nils is probably right, its not really economically viable and as Paul said extra weight also.

How about octagonal

only jesting

Ray
Old Aug 18, 2011, 02:01 PM
jevermeister is offline
Find More Posts by jevermeister
Registered User
jevermeister's Avatar
you guys and your ideas....

mabe pentagon....
Old Aug 19, 2011, 02:39 AM
Galumbo is offline
Find More Posts by Galumbo
Able to learn fly
Where can I get 9x4.7 cc and ccw props?
I only find 8x4.5 or 10x4.5 on the internet.
Paul, you've said somthing about special sizes of propellers?
Old Aug 19, 2011, 06:49 AM
Goofy23 is offline
Find More Posts by Goofy23
Registered User
Goofy23's Avatar
I may can get some 9xX as APC props, but i am not sure if those will be hot sellers.
Old Aug 19, 2011, 07:21 AM
whiteturbo is offline
Find More Posts by whiteturbo
Registered MisUser
whiteturbo's Avatar
Quote:
Originally Posted by warthox View Post
the flyduino mwc board with freeimu v0.3.5_ms from fabio




Something is not quite right here and i couldnt put my finger on it. Now it has come to me!
If your using the Mini Pro setup you only have aux1 available so how do you switch the barometer and mag as well as the ACC.
Sorry if im being thick and not seeing the obvious but could someone put me out of my misery because i cant figure it out.

Ray(i like round)


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
New Product Please let me introduce myself jimaquo Dock Talk 7 Oct 27, 2010 03:27 AM
Let me introduce the DEMON!!!! (Transparent covering and eliptical wing!!!) modest-master Sport Planes 7 Aug 26, 2002 12:46 AM
Let me introduce Angelis 280/400, Benjamin, Zombi (ARFs) modest-master Parkflyers 17 Mar 14, 2002 02:20 PM
Let me introduce the "NIKE" modest-master Electric Sailplanes 3 Mar 07, 2002 06:20 AM