The New Phantom F3P Plane by - RC Groups
Thread Tools
Jan 31, 2011, 02:54 AM
Registered User
tallflyer's Avatar

The New Phantom F3P Plane by

Phantom F3P

I got a email from My good friend Mark & Sara over at there son Kyle has been working on This super precision aerobatic plane for over 2 years. Using state of the art software and simulated wind tunnel testing we have tested many variations and have created the slowest, best balanced indoor RC plane ever! Just watch the videos, everyone who flies it is amazed. Easy to assemble with a Ready to fly weight of 4.5 to 5 oz. un- milled. Extremly easy to fly with removable airbrakes. This plane is truly amazing without being milled.

Subsonic Package :

* Motrolfly 2203-1600 with 84 prop
* Sonic Power 7.4V 250mAh 30C Lipo

Sport flying will require:

* 10 to 15 gram Brushless Motor
* 6A ESC
* 200 to 350Mah 2 cell Lipo
* 1ea. 7 to 9 gram Servo
* 2 ea. 3.7 to 4.7 gram Servos


* WingSpan 34.25
* Weight 4.5 to 5oz. RTF with Subsonic package (not milled)
* Wing Aera 260.83 sq. in.
* Wing Loading 2.65oz./sq. ft.
* Wing Cube Loading 2

Kit Comes Un-Painted. We do not offer milling service.

You can find out more about this plane on my site
or Please Visit for more information on how to get one.


New Super Precision PHANTOM F3P (3 min 54 sec)
Last edited by tallflyer; Feb 05, 2011 at 01:37 PM.
Sign up now
to remove ads between posts
Jan 31, 2011, 02:57 AM
Registered User
tallflyer's Avatar
Complete Build Video Series!

Phantom Build Video # 1 (9 min 46 sec)

Phantom Build Video # 2 (9 min 55 sec)

Phantom Build video # 3 (10 min 30 sec)

Phantom Build video # 4 (stringing part a) (5 min 53 sec)

phantom build video part # 5 (6 min 34 sec)
Latest blog entry: Yunnec Typhoon H Review
Feb 05, 2011, 11:27 AM
Registered User
Can you tell us what brand adhesive are you using for construction with the depron? It looks like CA, but I thought that melts the foam? I have tried many "foam safe" products with mixed results.

Feb 05, 2011, 01:35 PM
Registered User
tallflyer's Avatar
Super-Gold+™ Medium Foam Safe CA

+ kicker where required.

wipe down your parts being glue with Isopropyl Alcohol Many Depron parts have been treated in the milling process
and have a film on them sometimes make them hard to glue. so just wiping all your parts down to get any oils and film takes care of this.
Latest blog entry: Yunnec Typhoon H Review
Feb 11, 2011, 05:25 PM
Registered User
tallflyer's Avatar
Ok everyone Im building a phantom kit next week so I can take pictures and show more details on how to build and setup this plane.

If there is anything you would like me to cover please post your Comments below.

How to paint
how to Glue
How to set CG
what Electronics work the best
setting up your radio

Since there are build videos Im going to post pictures that show closeup what to do.

So stay tunned.
Latest blog entry: Yunnec Typhoon H Review
Feb 17, 2011, 05:20 PM
Registered User
foam safe works just fine!! but for those who use the kicker in a spray can will have the issue of the foam getting eatin away!!!! theres something in it that eats the foam so steer clear of the kicker in a spray can for foamies.
Feb 19, 2011, 11:32 AM
Registered User
I finished the airframe and the kevlar thread works fantastic! I am very surprised at how stiff the structure is just using 3mil depron and the thread -
I am using SuperGold+, it is the best foam safe ca on depron I have ever used.
Waiting for linkage examples and component locations -

Feb 23, 2011, 06:14 AM
Registered User
tallflyer's Avatar
I will post some pictures later of my finished plane! I shot like 40 pictures of my build but my memory card went wacko on me and I lost them all no problem I can shoot pictures of the completed plans so you can see the finished results, Now I just need to get out and fly here.
Latest blog entry: Yunnec Typhoon H Review
Jun 04, 2011, 01:37 PM
Registered User

Updates? Advice?

Getting ready to buy this place...hoping to hear good news from users. You said you had pix?

Anything appreciated.

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Article ULD EPP BiPlane Trainer Review 78dave 3D Flying 35 Nov 09, 2010 10:59 PM
New Product Cheap Trick - Prototype Robert Youens 3D Flying 2 May 09, 2010 07:43 AM
New Product New Photo Ship From Robert Youens Aerial Photography 2 Feb 28, 2010 05:14 PM
Article Robert Youens' BudgetRC Arrow F3P Aircraft Review BoneDoc Indoor Pattern/F3P 105 Feb 10, 2010 08:39 AM
Discussion EPP F3P Plane 3d_Crazy Indoor Pattern/F3P 15 Aug 20, 2006 10:37 PM