Lumenier RB2205C-12 2400KV SKITZO Ceramic Bearing Motor
Thread Tools
Old Dec 06, 2012, 09:15 PM
SteveT. is offline
Find More Posts by SteveT.
I fly, therefore, I crash!!!
SteveT.'s Avatar
There was a bit of discussion about this few pages back. And according to our good friend "theKM", they were designed to be taped on, so that if there is any problem, you can just re-tape them..

SteveT
RCG Plus Member
Latest blog entry: My hangar...
Sign up now
to remove ads between posts
Old Dec 06, 2012, 09:40 PM
zmonster97 is offline
Find More Posts by zmonster97
Team Aztech Aeromodels!
zmonster97's Avatar
I know. But, I asked which way was the right way to install them and Joe responded "So they stay on." I was just confused with his answer.
Old Dec 06, 2012, 09:58 PM
SteveT. is offline
Find More Posts by SteveT.
I fly, therefore, I crash!!!
SteveT.'s Avatar
He was messing with you.....

SteveT
RCG Plus Member
Latest blog entry: My hangar...
Old Dec 07, 2012, 06:28 AM
zmonster97 is offline
Find More Posts by zmonster97
Team Aztech Aeromodels!
zmonster97's Avatar
Must have been.
Old Dec 09, 2012, 09:57 PM
zmonster97 is offline
Find More Posts by zmonster97
Team Aztech Aeromodels!
zmonster97's Avatar
Me flying my vyper bype! Watch in hd.

3DHS 42" Vyper Bype evening hucking! (8 min 32 sec)
Old Dec 09, 2012, 10:01 PM
M.Putnam is offline
Find More Posts by M.Putnam
Shade Tree Aviation #2
M.Putnam's Avatar
Nice flying! Man that thing has a crazy fast roll rate!
Old Dec 10, 2012, 06:21 AM
zmonster97 is offline
Find More Posts by zmonster97
Team Aztech Aeromodels!
zmonster97's Avatar
Thanks!

Yep! It sure does.
Old Dec 11, 2012, 09:25 PM
3drcparts is offline
Find More Posts by 3drcparts
inverted-i-fly
3drcparts's Avatar
quite in here, nice flying z, Steve you maiden yet?

I put 5 flights on this today in the bitter cold foggy weather (49) almost lost orientations a couple times, I've come to conclude, bipes, quads and helis are not good in grey skys. Anyways I toned down my ailerons just a bit and all of a sudden, slow low HA rollers are a thing of beauty. Also picked up a used PA ultimate (sorry Steve) which I really like, but these are really two way different planes so no comparisons.
Old Dec 11, 2012, 09:41 PM
SteveT. is offline
Find More Posts by SteveT.
I fly, therefore, I crash!!!
SteveT.'s Avatar
Quote:
Originally Posted by Inverted-I-Fly View Post
quite in here, nice flying z, Steve you maiden yet?

I put 5 flights on this today in the bitter cold foggy weather (49) almost lost orientations a couple times, I've come to conclude, bipes, quads and helis are not good in grey skys. Anyways I toned down my ailerons just a bit and all of a sudden, slow low HA rollers are a thing of beauty. Also picked up a used PA ultimate (sorry Steve) which I really like, but these are really two way different planes so no comparisons.
I haven't...still have to set up the throws and install some battery retention straps...Pretty darn so though if the weather cooperates...

SteveT
RCG Plus Member
Latest blog entry: My hangar...
Old Dec 14, 2012, 09:10 PM
M.Putnam is offline
Find More Posts by M.Putnam
Shade Tree Aviation #2
M.Putnam's Avatar
I am down to completing the wing assembly. I just need to mount the aileron servos and do the wing linkages...Hope to do some flying over Christmas break.
Old Dec 14, 2012, 09:13 PM
SteveT. is offline
Find More Posts by SteveT.
I fly, therefore, I crash!!!
SteveT.'s Avatar
Mine is in my hangar ready to fly, but the weather looks like crap for about a week...

SteveT
RCG Plus Member
Latest blog entry: My hangar...
Old Dec 22, 2012, 12:31 AM
hone1er is offline
Find More Posts by hone1er
Team Twisted!
hone1er's Avatar
Can someone who is using a motrofly motor give me the length of the spacers needed?

I'm thinking i need 17-18 millimeters....next problem is where to get some or what to make them from.
Old Dec 22, 2012, 12:54 AM
tdab is offline
Find More Posts by tdab
t = Col Frank Fitts
tdab's Avatar
Quote:
Originally Posted by hone1er View Post
.next problem is where to get some
Try here: http://www.mcmaster.com/#

Under spacers and standoffs....tommy
Old Dec 22, 2012, 12:55 AM
Mr Big Head is online now
Find More Posts by Mr Big Head
Registered User
Mr Big Head's Avatar
Quote:
Originally Posted by hone1er View Post
Can someone who is using a motrofly motor give me the length of the spacers needed?

I'm thinking i need 17-18 millimeters....next problem is where to get some or what to make them from.
Ace hardware has a good selection. Although when I mounted a Hacker A40-12S in my 59 it was past closing. I went to my prop spacer drawer I found some that fit the motor mount screws perfect then got 16 of the same one and used 4 per screw. Working good so far. We all unless you toss them have gobs of these right?
Old Dec 22, 2012, 07:58 AM
zmonster97 is offline
Find More Posts by zmonster97
Team Aztech Aeromodels!
zmonster97's Avatar
Quote:
Originally Posted by hone1er View Post
Can someone who is using a motrofly motor give me the length of the spacers needed?

I'm thinking i need 17-18 millimeters....next problem is where to get some or what to make them from.
I used the ones the plane comes with and they work fine.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Unofficial 3DHS-Bipe thread. Buzzkill2 3D Flying 139 Jul 07, 2011 01:13 AM
Question 3DHS Bipe? PinkYakRC 3D Flying 127 Jul 03, 2011 11:11 AM
Question Crashed my 3DHS Edge 55 need new planes any advice? bhoges17 3D Flying 11 Jan 26, 2010 01:19 PM
Any news of new GWS P-40??? CryHavoc Parkflyers 5 Sep 05, 2004 11:41 AM