Shop our Airplanes Products Drone Products Sales
Oct 02, 2012, 08:04 AM
Registered User
jsmith285's Avatar
Quote:
Originally Posted by Bigster View Post
Bad idea to extend 12ga wire on the ESC with 13ga? It's all I have.
Few inches wont matter
Sign up now
to remove ads between posts
Oct 02, 2012, 08:43 AM
Well, now that you know ...
Bigster's Avatar
Great. Thanks Jim.
Oct 02, 2012, 03:50 PM
I fly, therefore, I crash!!!
SteveT.'s Avatar
nvm
Latest blog entry: My hangar...
Oct 02, 2012, 04:13 PM
Registered User
jsmith285's Avatar
Quote:
Originally Posted by stevet. View Post
nvm
hummmmm
Oct 04, 2012, 08:58 PM
Shade Tree Aviation #2
M.Putnam's Avatar
Got the gear fairings mounted tonight. I decided to go with Welders glue. I used wax paper to keep glue off of the wing and hatch. there really isn't much area for the fairings to mount to. I wanted to make sure I didn't glue them to the hatch! Worked out good.
Oct 04, 2012, 09:26 PM
↓↘→ + (punch)
theKM's Avatar
my favorite method for the fairing is to get the Scotch Transparent tape (not their "invisible" stuff with the matte finish, need the crystal clear stuff), and use tape both sides of the gear leg... this allows the fairing to be in line with the gear leg, lots of grip to tape both sides, also maximises the area of the faring.
Latest blog entry: Updated Hatcam - Apr2016
Oct 04, 2012, 10:26 PM
Well, now that you know ...
Bigster's Avatar
I ended up only gluing to the gear. I looked tonight and figured I might hotglue in a couple spots along the fuse since I have a little gap there. Looks great though. I can't wait to get it in the air tomorrow and start playing with some mixes.
Oct 04, 2012, 10:27 PM
inverted-i-fly
3drcparts's Avatar
Quote:
Originally Posted by jsmith285 View Post
Few inches wont matter
that is not what she said
Oct 05, 2012, 06:30 AM
Registered User
jsmith285's Avatar
Quote:
Originally Posted by Inverted-I-Fly View Post
that is not what she said
She said that To You?
Oct 05, 2012, 04:35 PM
I fly, therefore, I crash!!!
SteveT.'s Avatar
So.....sat down at the computer last night and ordered 8 Hitec HS-85MGs, four HS-225MGs, two Castle Creations ICE lite 75's and an ICE100 from Tower....did it in two orders, and not only got discounts for buying multiples of items, but also saved $100.00 using my Tower saver club discount....and got free shipping......Since I already bought two Motrolfly motors for my 51" Slick, and Byper...and have the motor for my 58" Edge... I am now ready to build all of them.... Byper first of course, just as soon as I finish up my 70" Velox, which should be done today or this weekend by the latest!!

SteveT
Latest blog entry: My hangar...
Oct 05, 2012, 08:12 PM
Well, now that you know ...
Bigster's Avatar
You gots some cool toys, Steve!
Oct 05, 2012, 08:25 PM
I fly, therefore, I crash!!!
SteveT.'s Avatar
Quote:
Originally Posted by Bigster View Post
You gots some cool toys, Steve!
Just a few....

SteveT
Latest blog entry: My hangar...
Oct 05, 2012, 09:17 PM
Well, now that you know ...
Bigster's Avatar
What prop are you using with the Motrolfly for the Bype? I had a couple more flights today and was considering bumping the prop size from 14x7 to 15x6 (A30-12XL). I was curious if you can use a 15" prop with the 3615? I don't see any prop/amp data for it.
Oct 05, 2012, 09:20 PM
I fly, therefore, I crash!!!
SteveT.'s Avatar
Quote:
Originally Posted by Bigster View Post
What prop are you using with the Motrolfly for the Bype? I had a couple more flights today and was considering bumping the prop size from 14x7 to 15x6 (A30-12XL). I was curious if you can use a 15" prop with the 3615? I don't see any prop/amp data for it.
Not real sure yet as I haven't gotten there yet....

SteveT
Latest blog entry: My hangar...
Oct 05, 2012, 09:23 PM
inverted-i-fly
3drcparts's Avatar
Quote:
Originally Posted by Bigster View Post
What prop are you using with the Motrolfly for the Bype? I had a couple more flights today and was considering bumping the prop size from 14x7 to 15x6 (A30-12XL). I was curious if you can use a 15" prop with the 3615? I don't see any prop/amp data for it.
that is what I run on the 3615, works great


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Unofficial 3DHS-Bipe thread. Buzzkill2 3D Flying 139 Jul 07, 2011 12:13 AM
Question 3DHS Bipe? PinkYakRC 3D Flying 127 Jul 03, 2011 10:11 AM
Question Crashed my 3DHS Edge 55 need new planes any advice? bhoges17 3D Flying 11 Jan 26, 2010 12:19 PM
Any news of new GWS P-40??? CryHavoc Parkflyers 5 Sep 05, 2004 10:41 AM