Lumenier RB2205C-12 2400KV SKITZO Ceramic Bearing Motor
Thread Tools
Old Sep 29, 2012, 04:45 PM
Bigster is offline
Find More Posts by Bigster
Well, now that you know ...
Bigster's Avatar
I seriously contemplated using tape. In the end I decided I would make less of a mess sticking them on than taping. I'm sure when they pop off, I'll resort to tape.
Sign up now
to remove ads between posts
Old Sep 30, 2012, 02:27 AM
Quiet E. Flyer is offline
Find More Posts by Quiet E. Flyer
"Thumbs"
Quiet E. Flyer's Avatar

Still flies great......


After I toned the throws down further..... the Byper flies quite precisely....then switch on the higher throws.... it becomes wild!!

Here's some pictures from Arizona today....> 95F and slightly breezy......
Old Sep 30, 2012, 03:02 AM
SteveT. is online now
Find More Posts by SteveT.
I fly, therefore, I crash!!!
SteveT.'s Avatar
Looks great Quiet!!!

SteveT
RCG Plus Member
Latest blog entry: My hangar...
Old Sep 30, 2012, 08:32 AM
gremlin is offline
Find More Posts by gremlin
What?!? I didn't do that!
gremlin's Avatar
Great pics. I really like the way my red Bype looks but that blue really stands out. Maybe I need another one in blue just so I can compare the two schemes up close.
Old Sep 30, 2012, 01:08 PM
Quiet E. Flyer is offline
Find More Posts by Quiet E. Flyer
"Thumbs"
Quiet E. Flyer's Avatar
Quote:
Originally Posted by SteveT. View Post
Looks great Quiet!!!

SteveT
Thank you Steve. Wish I can get some videos too.
Old Sep 30, 2012, 01:14 PM
Quiet E. Flyer is offline
Find More Posts by Quiet E. Flyer
"Thumbs"
Quiet E. Flyer's Avatar
Quote:
Originally Posted by gremlin View Post
Great pics. I really like the way my red Bype looks but that blue really stands out. Maybe I need another one in blue just so I can compare the two schemes up close.
Red or Blue..... it really doesn't matter. It's the Bype that really stands out!!
Old Sep 30, 2012, 05:29 PM
jsmith285 is offline
Find More Posts by jsmith285
Registered User
jsmith285's Avatar
Bipe at HuckFest
Old Sep 30, 2012, 06:34 PM
SteveT. is online now
Find More Posts by SteveT.
I fly, therefore, I crash!!!
SteveT.'s Avatar
Quote:
Originally Posted by jsmith285 View Post
Bipe at HuckFest
Only one???

SteveT
RCG Plus Member
Latest blog entry: My hangar...
Old Sep 30, 2012, 06:50 PM
Bigster is offline
Find More Posts by Bigster
Well, now that you know ...
Bigster's Avatar
Maiden complete!

Went with the Hacker motor, Gens Ace 4S 2500, ZTW 70A, HS-85MGs all around. Put the battery in, did a quick CG check and took off. Whoa! Lots of power, but waaaaay tail heavy. Apparently my quick check wasn't good enough. Brought it in, and ended up moving the battery all the way up into the nose. Flew much, much better. Where are folks with the Hacker putting their batteries? I know the recommendation is at least a 4S2500, but I could barely get my hands in there to get strap cinched down.
Old Sep 30, 2012, 09:39 PM
weaser42 is online now
Find More Posts by weaser42
House of Paine
weaser42's Avatar
Oh yeah, I'm using A30-12XL V1 with X70 ESC and CC BEC with 5085s and running 4S 2200. I did use spacers that came with the kit to push motor forward and tried to get stuff as far forward as possible. I'm sticking the pack as far forward as I can be comfortable getting a velcro strap on there. CG is close to neutral but I would like it a bit more forward (per suggestions) and may pick up some 2600 or so size packs.
Old Sep 30, 2012, 09:47 PM
3drcparts is offline
Find More Posts by 3drcparts
inverted-i-fly
3drcparts's Avatar
Quote:
Originally Posted by weaser42 View Post
Oh yeah, I'm using A30-12XL V1 with X70 ESC and CC BEC with 5085s and running 4S 2200. I did use spacers that came with the kit to push motor forward and tried to get stuff as far forward as possible. I'm sticking the pack as far forward as I can be comfortable getting a velcro strap on there. CG is close to neutral but I would like it a bit more forward (per suggestions) and may pick up some 2600 or so size packs.
ditto and the battery tray does not go all the way to the front so the battery is only half supported, I'm thinking of extending the tray and maybe adding weight
Old Sep 30, 2012, 09:55 PM
Bigster is offline
Find More Posts by Bigster
Well, now that you know ...
Bigster's Avatar
I saw a picture a while back about the location of someone's ESC. Where did you guys mount yours? The ZTW has those dinky short wires, so I ended up having to fight with the ESC when trying to move the battery into the nose. I'm considering getting some of these - I don't want to move it toward the back, but it's got to go somewhere else.

http://www.headsuprc.com/servlet/the...for-ESC/Detail

Oh, and I didn't think to use the spacers.
Old Sep 30, 2012, 10:48 PM
3drcparts is offline
Find More Posts by 3drcparts
inverted-i-fly
3drcparts's Avatar
I would personally extend the battery lead off the esc before the motor leads
Old Sep 30, 2012, 10:57 PM
Bigster is offline
Find More Posts by Bigster
Well, now that you know ...
Bigster's Avatar
I'd like to but apparently that's not a good thing to do without increasing the capacitors on the input (battery leads). I'm guessing there's a reason ZTW made them so short (can't be the price of extra wire I hope!)

I'll also look into extending the battery tray. At the very least I have to move the ESC to get the wires out of the way. The other option, of course, is just shove some weight in the nose but I really don't want to resort to that.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Unofficial 3DHS-Bipe thread. Buzzkill2 3D Flying 139 Jul 07, 2011 01:13 AM
Question 3DHS Bipe? PinkYakRC 3D Flying 127 Jul 03, 2011 11:11 AM
Question Crashed my 3DHS Edge 55 need new planes any advice? bhoges17 3D Flying 11 Jan 26, 2010 01:19 PM
Any news of new GWS P-40??? CryHavoc Parkflyers 5 Sep 05, 2004 11:41 AM