Thread Tools
Old Feb 01, 2013, 05:07 PM
sdossett is offline
Find More Posts by sdossett
Registered User

3 blade


Elsewhere on this forum there was a suggestion to use the bf109 3-blade from Parkzone. I found them, PKZ4901, but could not find the JR 2.75" 3-blade spinner also referred to, nothing in Dubro, Dave Brown,EFLite either. I have not picked my plane up,so have no measurements on the diameter of stock spinner.
Please post if any news.

Thanks
Sign up now
to remove ads between posts
Old Feb 01, 2013, 05:08 PM
IfIHadWings is offline
Find More Posts by IfIHadWings
Eat, Fly, Dream, Repeat...
IfIHadWings's Avatar
My BNF is still in the box, but you guys are inspiring me to do my first weathering and paint change project seeing all the paint mods here!

I know someone previously mentioned the FlyRC review of this plane (March 2013), but there is another article in of the same mag...Simple Weathering Techniques and they demonstrate it on the Eflite Hurri 25e. Some subtle but very effective changes.
Old Feb 01, 2013, 05:31 PM
Retiredtech is offline
Find More Posts by Retiredtech
Registered User
[Removed by User
Last edited by Retiredtech; May 29, 2013 at 02:07 AM.
Old Feb 01, 2013, 06:02 PM
Vapor Trails is online now
Find More Posts by Vapor Trails
DFC~ We Do Flyin' Right
Vapor Trails's Avatar
Quote:
Originally Posted by Plane Chaos View Post
... there should have been an adendum notice to this effect in your box (...main manual is incorrect)
... officially acknowledged by HH some time ago.
FWIW~ I did not have an addendum in my box; but had read the thread...


Quote:
Originally Posted by Babadush View Post
Some of you might already do this. When I'm using different batteries in this plane(i use 3200 and 5000 3s) I get the cg right and then mark the inside of the battery bay. I do this for different batteries and I mark a spot for "wind" and move the battery notch a half inch forward. That way once it's marked I never have to balance again unless I buy different batteries.
Did you have to make any modifications to fit the 5000mAh battery?
RCG Plus Member
Latest blog entry: Please kill isis
Old Feb 01, 2013, 06:43 PM
3drcparts is offline
Find More Posts by 3drcparts
inverted-i-fly
3drcparts's Avatar
Maiden today was a success, she flys great, but even on my 3S packs the esc was getting hot, what are people doing to increase airflow
Old Feb 01, 2013, 06:47 PM
Plane Chaos is offline
Find More Posts by Plane Chaos
Quote:
Originally Posted by sdossett View Post
Elsewhere on this forum there was a suggestion to use the bf109 3-blade from Parkzone. I found them, PKZ4901, but could not find the JR 2.75" 3-blade spinner also referred to, nothing in Dubro, Dave Brown,EFLite either. I have not picked my plane up,so have no measurements on the diameter of stock spinner.
Please post if any news.

Thanks
It may have been a previous post of mine you encountered:-



In which case I think there was a typo in there
....pack was labelled "JP" (i.e.J Perkins) ... not "JR).
... will correct that post.

Link here:-

http://www.jperkinsdistribution.co.u...tname=Spinners



Although the prop and spinner fitted together nicely, (and I now do have a spare PZ bf109 prop) .... I havn't actually tried it yet !! ... cautious of some comments from other folk in here, that the 109 prop might over-amp the stock power train I currently have; keep to meaning to put my meter on it.

Meanwhile, I'm still flying with the stock prop.

Old Feb 01, 2013, 08:20 PM
sdossett is offline
Find More Posts by sdossett
Registered User

Spinner


Thanks Chaos. I'll follow that URL!
Old Feb 01, 2013, 09:01 PM
Buzzcut2239 is offline
Find More Posts by Buzzcut2239
Registered User
Buzzcut2239's Avatar

Cooling ESC


Quote:
Originally Posted by Inverted-I-Fly View Post
Maiden today was a success, she flys great, but even on my 3S packs the esc was getting hot, what are people doing to increase airflow
I hollowed out the scoop and made it functional. Where the scoop goes over the wings and body I cut that out also to let the air in. I then cut relief holes in the bottom of the tail section. I havn't maidened the plane yet due to poor weather but these mods should help.
Old Feb 01, 2013, 09:23 PM
3drcparts is offline
Find More Posts by 3drcparts
inverted-i-fly
3drcparts's Avatar
I saw that going through the attachments, looks good, but my wing is already in place, I also think there needs to be a vent hole, anyway I move my esc back into the bay and cut a vent in the underside, at least now it is not sitting on top of the batteries sandwiched in foam and should get some air flow will test tomorrow
Old Feb 01, 2013, 09:42 PM
Diesel6401 is offline
Find More Posts by Diesel6401
Memento Mori
Diesel6401's Avatar
I did the scoop mod also and made some exit holes out the back. maidened and crashed (camo works really good especially at dusk ) but the esc wasn't hot
Old Feb 01, 2013, 09:52 PM
3drcparts is offline
Find More Posts by 3drcparts
inverted-i-fly
3drcparts's Avatar
Quote:
Originally Posted by Diesel6401 View Post
I did the scoop mod also and made some exit holes out the back. maidened and crashed (camo works really good especially at dusk ) but the esc wasn't hot
that sucks, ya I can see this disappearing quickly at dusk
Old Feb 01, 2013, 09:59 PM
Babadush is offline
Find More Posts by Babadush
Registered User
Babadush's Avatar
Quote:
Originally Posted by bsbauman View Post

Did you have to make any modifications to fit the 5000mAh battery?
Nope. It's a Venom 5000mah I got from a hobby shop a while back. It slid right in. It's great for longer flight times. I get 12 min scale flying.
Old Feb 01, 2013, 11:32 PM
jrtubb is online now
Find More Posts by jrtubb
I Fly!
jrtubb's Avatar
I saw this on sale today for a steal in a BNF. Only issue is I don't have any 3200 batteries but tons of 2200 ones. Can I run 2 2200/11.1 in parallel in this plane? I would preference not to have to buy more batteries right now.
Old Feb 01, 2013, 11:44 PM
Koo is offline
Koo
Find More Posts by Koo
Koo
A semi-advanced FPV newbie
Koo's Avatar
Quote:
Originally Posted by jrtubb View Post
I saw this on sale today for a steal in a BNF. Only issue is I don't have any 3200 batteries but tons of 2200 ones. Can I run 2 2200/11.1 in parallel in this plane? I would preference not to have to buy more batteries right now.
If they fit, you can. I am going to be doing exactly same thing and having 4400mah will just give you a bit longer flight times. There is really no reason why you would need to buy the extra lipos
Old Feb 01, 2013, 11:46 PM
ryramZ is offline
Find More Posts by ryramZ
Your Pilot Ryan
ryramZ's Avatar
Quote:
Originally Posted by IfIHadWings View Post
My BNF is still in the box, but you guys are inspiring me to do my first weathering and paint change project seeing all the paint mods here!

I know someone previously mentioned the FlyRC review of this plane (March 2013), but there is another article in of the same mag...Simple Weathering Techniques and they demonstrate it on the Eflite Hurri 25e. Some subtle but very effective changes.
Fall issue of Park Pilot has a review of the Hurricane that mentions the CG addendum along with the updated measurements.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion NEW!!!! E-Flite Carbon-Z Yak 54 BNF/PNP!!! DFflyer 3D Foamies 4129 Jul 01, 2016 01:17 AM
Discussion E-flite Carbon-Z Yak 54 shoeler Sport Planes 4 Aug 13, 2013 05:47 PM
Cool New E-flite Carbon-Z Yak 54 miksta115 Electric Plane Talk 39 Oct 11, 2011 11:05 AM
New Product E-Flite Carbon-Z Yak 54 (48'' Wingspan 940 Watts!) Get Real 3D Foamies 1066 Feb 22, 2011 11:21 PM
Idea Parkzone's Next Z-Foam Warbird.... and thoughts,feelings, etc. SmoothCruizer Electric Warbirds 3836 Feb 03, 2011 12:17 PM