Thread Tools
Feb 13, 2011, 01:58 AM
Registered User
Big Nuts 181's Avatar
It's very cute......... for a model this size.....
Sign up now
to remove ads between posts
Feb 13, 2011, 02:21 AM
TEAM OZSKUNKWORX
r/c junkie's Avatar
Quote:
Originally Posted by Big Nuts 181
It's very cute......... for a model this size.....
Thanks Ross i dont want them much bigger as the slopes i fly are would be hard to land a much larger model

Shane
Feb 13, 2011, 02:39 AM
BAZR PLANE DO THEIR OWN TRICKS
anthonyd's Avatar
Thats cool dude

Ant.
Feb 13, 2011, 04:23 AM
I failed linkage geometry
salisbug's Avatar
Quote:
Originally Posted by Big Nuts 181
It's very cute......... for a model this size.....
He doesn't like elastic wings.......
Feb 13, 2011, 04:28 AM
TEAM OZSKUNKWORX
r/c junkie's Avatar
I have started to fill any imperfections in the foam tonight getting ready to do the centre panel of the wing and slide it in.Hopping the joiner bar turns up tomorrow so i can make the tube for it.

Shane
Feb 13, 2011, 05:21 AM
BAZR PLANE DO THEIR OWN TRICKS
anthonyd's Avatar
Quote:
Originally Posted by r/c junkie
I have started to fill any imperfections in the foam tonight getting ready to do the centre panel of the wing and slide it in.Hopping the joiner bar turns up tomorrow so i can make the tube for it.

Shane
yell out if ya want some big sock to make a tube.

Ant.
Feb 14, 2011, 05:43 AM
Registered User
Big Nuts 181's Avatar
Actually I quite like the model.... Nothing wrong with the size it's handy, practical
And cute.....
Feb 17, 2011, 05:52 PM
Is my CG correct?
discostu956's Avatar
I grew up flying in Blaniks, learnt to fly in them too. Im extrememly keen to build a scale one day, but putting it off for the moment.

Looking good so far
Feb 20, 2011, 05:44 PM
I failed linkage geometry
salisbug's Avatar
My one and only glider flight was in a Blanik L-13 (I was a lot lighter then.....).

Has the joiner bar turned up yet Shane?
Feb 22, 2011, 05:04 AM
TEAM OZSKUNKWORX
r/c junkie's Avatar
I got the centre panel cut tonight also made a joiner bar tube for the centre panel.I will post some pics tomorrow night.

Shane
Feb 23, 2011, 12:14 PM
I failed linkage geometry
salisbug's Avatar
Pics?
Feb 24, 2011, 01:49 AM
TEAM OZSKUNKWORX
r/c junkie's Avatar
Not much progress to report although i did get the sheeting on the centre section.Then i glued the centre section into the fuz all nice and straight.Tonight i will go and lay up another joiner bar tube and start to get the wing panels ready for the joiner tube to be installed.

Shane
Feb 24, 2011, 02:59 AM
I failed linkage geometry
salisbug's Avatar
Very impressive young fella
Feb 24, 2011, 05:41 AM
TEAM OZSKUNKWORX
r/c junkie's Avatar
Ive been trying to nut out the tailplane attachment.First idea was to go with plugin tail halves.But im leaning towards a one peice diheaderal with a dowel to locate the front of the tail and a singal bolt at the rear of the tailplane.This would be able to slide in for the back and under the rudder.This way you ca either run a servo in each half of the tail or a y pushrod with internal torque rod in each elevator.

Any ideas guys

Shane
Feb 24, 2011, 03:42 PM
Registered User
Big Nuts 181's Avatar
Looks and sounds good Shane what ever method you choose will work well.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Help! Blanik L-13 Plan fly_kc Scale Sailplanes 17 Nov 22, 2015 11:08 AM
Question Blanik L-13 Mopar92 Scale Sailplanes 48 Oct 16, 2014 07:30 PM
Discussion Blanik L-13 eschlitzkus Scale Sailplanes 28 Apr 26, 2013 10:01 AM
Discussion Blanik L-13 Cockpit Detail Miraj Scale Sailplanes 3 Jan 17, 2008 09:31 PM
120" L-13 Blanik maiden Mickey Slope 6 Sep 12, 2007 05:47 PM