Shop our Airplanes Products Drone Products Sales
Thread Tools
Old Jan 22, 2011, 12:21 PM
Killionaire is offline
Find More Posts by Killionaire
SF Valley RC Flyers
Killionaire's Avatar
Discussion

Futaba 7C - How do I connect battery, receiver, & switch harness?


I can't find any information in the Futaba 7C manual about which plugs are used for what on the switch harness. The switch harness has a big black plug, a small red plug, and a small black plug. The receiver battery pack only can plug into the big black plug, so I did that. Then I plugged the small red plug from the switch harness into the 7/B port on the R617FS receiver. Then I tested it with a servo and it worked. Is this how I was supposed to do it? There's still a small black plug from the switch harness that is unused. What do I do with this? Is it used for recharging the receiver battery?
Sign up now
to remove ads between posts
Old Jan 22, 2011, 12:30 PM
coriolan is online now
Find More Posts by coriolan
"Unnecessary Necessity"
coriolan's Avatar
Yes the second black plug is to recharge the Rx pack without disconnecting the battery,connect to the battery when the switch in off position (dpdt switch)
Old Jan 22, 2011, 12:32 PM
Killionaire is offline
Find More Posts by Killionaire
SF Valley RC Flyers
Killionaire's Avatar
Do you mean I must turn the switch to off when I recharge the battery?
Old Jan 22, 2011, 01:36 PM
landeck is offline
Find More Posts by landeck
Registered User
Yes.

Bruce
Old Sep 02, 2013, 09:29 PM
CrashCourse is offline
Find More Posts by CrashCourse
Registered User
I realize this thread is a couple years old, but i find it ironic that i had the exact same question on a HiTEC switch harness i just bought THiS WEEK! I mean, it doesn’t seem to matter WHO the manufacturer is - user guide instructions do not make it clear for beginners how to do a basic set up. After I got help on this forum (thanks!) i was able to install and use my harness switch. But the question is (for me anyway) why can’t manufacturers make things easier for beginners? Trying to get my first ‘glow’ engine plane off the ground is like beating my head against the wall. There is one good thing about beating ur head against the wall though, it feels so good when u stop
Old Nov 01, 2013, 11:51 AM
rpellicciotti is offline
Find More Posts by rpellicciotti
Registered User
Quote:
Originally Posted by CrashCourse View Post
I realize this thread is a couple years old, but i find it ironic that i had the exact same question on a HiTEC switch harness i just bought THiS WEEK! I mean, it doesn’t seem to matter WHO the manufacturer is - user guide instructions do not make it clear for beginners how to do a basic set up. After I got help on this forum (thanks!) i was able to install and use my harness switch. But the question is (for me anyway) why can’t manufacturers make things easier for beginners? Trying to get my first ‘glow’ engine plane off the ground is like beating my head against the wall. There is one good thing about beating ur head against the wall though, it feels so good when u stop
In the old days, people bought their stuff from local mom & pop hobby shops. They were knowledgeable and helped people get started. Most people also belong to clubs and there was always one or two people in the club that liked to help beginners. Now a days, with everything ordered from the internet and sometimes from a foreign company that doesn't have English as their first language, these kind of things happen. The manufacturers haven't caught up to it yet.
Old Nov 01, 2013, 12:20 PM
coriolan is online now
Find More Posts by coriolan
"Unnecessary Necessity"
coriolan's Avatar
How true rpellicciotti!


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Sold Jr/Hitec receiver switch harness w/ charge lead - 4 in good condition $8 shipped all! SPasierb Aircraft - General - Radio Equipment (FS/W) 0 Jan 15, 2011 11:42 AM
Question How do i asign a switch for rate mode and hh mode on futaba 8fg? jcervantes11 Radios 9 Oct 31, 2010 11:10 AM
Discussion Super Cub lp How do i convert to futaba 7c and brushless motor? txtrainiac Parkflyers 1 Sep 20, 2010 05:22 PM
Help! RX switch harness Futaba 7c 2.4ghz djmarchand Radios 0 Jul 15, 2008 05:07 PM
How do I connect an on/off switch to my ESC? Frank B Power Systems 1 Jul 26, 2001 09:17 PM