Shop our Airplanes Products Drone Products Sales
Feb 08, 2012, 08:26 PM
Registered User
monkeyhanger's Avatar
>At what voltage?

Sign up now
to remove ads between posts
Feb 08, 2012, 10:59 PM
Registered User
woot got it in today and my new 9958 which i've been flying all day out in the bay at the firestation until i just broke the stupid flybar there's a powercord that hangs down in the middle of the bay and i ziptied it up so it made a hoop i was practicing flying through then one of the heaters kicked on unexpectedly and blew my little bird off course and made it hit the loop and then down to the ground

new parts ordered can't wait to get home and fire up the 450
Feb 08, 2012, 11:08 PM
Texas NewB
Black_heart's Avatar
Make sure you go over it really good before you attempt Flight!
Feb 08, 2012, 11:13 PM
Registered User
i know i have at least 2 new bottles of blue loctite sitting in my toolbox my 1/8 scale nitro buggies drink that stuff like it's going out of style
Feb 09, 2012, 05:41 PM
Texas NewB
Black_heart's Avatar
OK dying here!
How did you make out nitrosportman?
Feb 10, 2012, 01:12 AM
Registered User
Awesome, only thing im short is one female deans connector, hobby shop only had one left but he's getting some more in tommorow

2650 batteries are flipping awesome really extend the run time maybe almost to 10 minutes
didn't really time it

9958 takes the same flybar as a msr blade so thats fixed and it glows in the dark too

loctite .... funny thing everything i have read states they don't come loctite'd mine did every screw that goes into metal thought that was kind of strange...

i was hovering about 2 foot off the ground, by the end of the day but still over-correcting a lot so i spent most of the day just walking scooting it up and down the street we had a good breeze here today so i had to be really careful finally retired back to the garage and just hovered in the middle of the garage i probably went through 20 charges between the stock 2200 and the one 2560 i had a deans connector for

all in all good day
Feb 10, 2012, 08:15 AM
Texas NewB
Black_heart's Avatar
I'm Happy to hear this.
I well have to take a look at the 2560 there is a hobby shop in Alerado that stock a Huge assortment of batteries "think he orders by the ton " very cheap.
last time I was there he had 50 Voltz 2200 3s 25c for 19.99 with dean conectors.

Bobby Jacks Sm Eng & Hobbies
6033 E Highway 67, Alvarado, TX 76009-6823
(817) 790-8824 ‎

He is hard core Heli check hem out if you get a chance.
Feb 10, 2012, 09:23 PM
Registered User
ran through another 20 batteries today flipping windy out man this thing fly's smooth it's so twitchy

getting ready to change my sub trim for my rudder
can you point me to some good settings for this radio to make it a little more newb friendly as far a the cyclic and endpoints and whatever else

i've already saved the stock settings like mentioned earlier in the thread
Feb 10, 2012, 09:41 PM
Registered User
oh yeah when charging do you recommend to charge at 1c or 2c
Feb 10, 2012, 09:53 PM
Texas NewB
Black_heart's Avatar
as for batteries have a read here
I cheat I have a smart charger
As I said before there is a radio setting posted earlier that I used that is pretty tame.
I'm still a newb my self so not to good at doing trim some one else did that one and it was grate.
Last edited by Black_heart; Feb 10, 2012 at 10:02 PM.
Feb 10, 2012, 10:29 PM
Registered User
Originally Posted by Black_heart View Post
as for batteries have a read here
I cheat I have a smart charger
As I said before there is a radio setting posted earlier that I used that is pretty tame.
I'm still a newb my self so not to good at doing trim some one else did that one and it was grate.
yeah i just found your settings
Feb 11, 2012, 09:44 AM
Registered User
and they work absolutely wonderful, at the firestation today 24 hours of flying time and hardly uninterrupted
Feb 11, 2012, 12:35 PM
Registered User
i need a better charger
Feb 11, 2012, 12:51 PM
Texas NewB
Black_heart's Avatar
I use this one it is a Clone but for the 3s batteries it works great
It needs a converter for the deans connector is only problem I found so far.
They say it tends to over heat on larger batteries so When i go to 6s on my HK600 I well need to mod it with a fan.
Feb 11, 2012, 03:07 PM
Registered User
mehere's Avatar

Simulator didn't work

Kept loosing orientation, crashing the 450 cost too much too repair so I went and got one of these.
Last edited by mehere; Apr 15, 2016 at 07:53 AM.

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Mini-Review Cermark Hausler 450 SE V2 koppterX 3D Electric Heli Flying 395 Sep 06, 2014 02:27 PM
Sold hausler 450 rtf heli new in box dennishobbies Aircraft - Electric - Helis (FS/W) 22 Jun 02, 2012 03:12 PM
New Product hausler 450 rtf heli dennishobbies Hot Online Deals 8 Jan 30, 2011 07:48 PM
Sold FS: RTF Align Trex 450 V2, DX7 OCFly Aircraft - Electric - Helis (FS/W) 2 Jan 10, 2011 11:24 AM
Off Site Align T-Rex 450 SE V2 Complete RTF RC Helicopter Tom Z Aircraft - Electric - Helis (FS/W) 1 Sep 25, 2010 08:07 PM