Thread Tools
Sep 27, 2012, 03:53 PM
Brent 黑雁
BThirsk's Avatar
Quote:
Originally Posted by segdohbird
I'm assuming it's a brushless esc, right?
If so do you have your brushless conv plugged in?
Usually if its just beeping, it means it has no signal from the RX. Is the Resistor in the Power check socket? Do the servos move when you move the ELV/AIL stick?
Sign up now
to remove ads between posts
Sep 27, 2012, 04:21 PM
Registered User
segdohbird's Avatar
Quote:
Originally Posted by BThirsk
Usually if its just beeping, it means it has no signal from the RX. Is the Resistor in the Power check socket? Do the servos move when you move the ELV/AIL stick?
He didn't have his brushless converter plugged in.
Sep 27, 2012, 04:27 PM
They call me plan B
Heli Biggie's Avatar
Ok so,i guess i fly her till she dies again and swap it all,over to the align frame. , then ill have 3 aligns lol.



Quote:
Originally Posted by mdeutschman
I have the Hitec 5055's on my 450pro cf with the 2614RX double brushless heli and they are great.
Sep 27, 2012, 07:38 PM
They call me plan B
Heli Biggie's Avatar
Found bent shaft. Duh. Im so cheap i didnt replace it after the last few crashes, but now with the new upper frames i guess it needed to be changed out. I hope thats it, but i will be testing tomorrow.
Sep 28, 2012, 11:48 AM
Registered User
Quote:
Originally Posted by Heli Biggie
Found bent shaft. Duh. Im so cheap i didnt replace it after the last few crashes, but now with the new upper frames i guess it needed to be changed out. I hope thats it, but i will be testing tomorrow.
what feather shaft did you use to replace it ? seems there are different ones on older compared to newer V400,s
Sep 28, 2012, 01:45 PM
rubber heli skills
These are the ones i use on my V400 head. They are thinner than the orig. ones and bend easier,but it saves alot of other parts in a crash and alot easier to install and you dont need loc-tite.
Make sure you order the kit as seen on this one that comes with the bearings and dampers.
http://www.ebay.com/itm/F00681-Feath...item3f02e075d6
Sep 28, 2012, 07:50 PM
They call me plan B
Heli Biggie's Avatar
I have the old version , i get replacments from heli-heli.com. In the trex parts
Sep 29, 2012, 09:54 AM
Registered User
CO2X's Avatar

V999d02


Deleted....not needed
Last edited by CO2X; Sep 29, 2012 at 10:45 PM. Reason: MORE....
Sep 29, 2012, 10:19 AM
Registered User
CO2X's Avatar

Finders reward


....deleted
Last edited by CO2X; Sep 29, 2012 at 10:46 PM. Reason: More...
Sep 29, 2012, 10:20 AM
Pittsburgh, PA
RTF brushless main setup. Just put it on last night and spun it up without blades. That thing sounds awesome. It sound much different that the brushed motors, is this correct? I also plugged the stock brushed motor into the brushless esc and it starting running without any throttle and i new immediatly that was wrong. Replugged it back into the original ESC rear motor plug.. Gonna put on the blades tonite and see how it goes. The only Tx setting i changed were the throttle limits to 70% Do i really need to make their recommended Gyro and travel adjustments to my Devo &?
Sep 29, 2012, 10:22 AM
Registered User
vyper2k1's Avatar
Quote:
Originally Posted by COCO2010
This is for v999d02.
If you can find anybody on this thread that i scammed i will give you a finders reward.
Don't know what's going on here but just wanted to say that I purchased Cocos frame and was completely happy with it. It's really 100x better than the stock frame and really easy to install along with doubling up the upper frame. Just my 2 cents on the matter.
Sep 29, 2012, 10:34 AM
Pittsburgh, PA
Quote:
Originally Posted by vyper2k1
Don't know what's going on here but just wanted to say that I purchased Cocos frame and was completely happy with it. It's really 100x better than the stock frame and really easy to install along with doubling up the upper frame. Just my 2 cents on the matter.
I also bought Coco's lower frame and recieved it in record time. No scam here man. Very satified with product and purchase.
Last edited by weav01; Sep 29, 2012 at 10:47 AM.
Sep 29, 2012, 10:47 AM
Registered User
Quote:
Originally Posted by COCO2010
This is for v999d02.
If you can find anybody on this thread that i scammed i will give you a finders reward.

REWARD !!!!
REWARD !!!!
REWARD !!!!
REWARD !!!
ill tell you what V999D02 , i have bought from this man zero problem, he has even sent me items and let me pay later !! There is no way you or anyone else has been scammed by him...
Sep 29, 2012, 11:24 AM
rubber heli skills
Quote:
Originally Posted by fastfwd
ill tell you what V999D02 , i have bought from this man zero problem, he has even sent me items and let me pay later !! There is no way you or anyone else has been scammed by him...
Ditto
Sep 29, 2012, 11:27 AM
Suspended Account
Quote:
Originally Posted by COCO2010
This is for V999D02....This are the info/picture I emailed you that you did not get.TRY ASKING ANYBODY ON THIS THREAD IF YOU CAN FIND SOMEBODY WHO HAS A PROBLEM WITH ME OR ANYBODY THAT I SCAMMED.YOUR $46.95 IS NOTHING TO ME,I'M JUST DOING YOU A FAVOR OF PROVIDING YOU A GOOD V400D02 LOWER FRAME.SEND ME A $46.95 PAYPAL INVOICE AND I WILL GIVE YOU BACK YOUR MONEY.

SAVE YOUR HEART BRO AND JUST SEND ME A PAYPAL INVOICE AND END THIS PROBLEM. I HAVE BETTER THINGS TO DO THAN DEALING WITH THIS CRAP.
I initially thought I'd been scammed as I added a "Read report" to the PM I sent you, and didn't receive a reply via the same although it had been read.

I have noticed today that you sent me an eMail, though.

Please accept my apology for jumping the Gun.

Anyway, the fact remains, the package hasn't arrived 21 Days hence.

The address you quoted is correct, so it seems the consignment has been lost, stolen or mis-delivered.

Shite happens.

Where do we go from here?

I'll will move this topic to PM where it rightfully belongs.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Another new Walkera (V400D02)? GetterDragun Micro Helis 130 Apr 01, 2013 09:23 AM
Discussion Alternative canopies for Walkera V200D02, V400D02 JumboA5 Mini Helis 2 Mar 18, 2011 04:29 AM
Question Transport devices for 2x Walkera V400D02 & 2x Walkera V200D02 JumboA5 Electric Heli Talk 2 Dec 13, 2010 08:22 AM
Discussion Walkera new 3D flybarless V400D02 Naev 3D Electric Heli Flying 2 Oct 31, 2010 08:50 PM