Thread Tools
This thread is privately moderated by Etonic, who may elect to delete unwanted replies.
Jul 26, 2003, 10:08 AM
Trader Rating: 148
Registered User

FS- Last lot of equipment (trimming my RC for start of school)- Epp wing, esc, poly's

Hi Guys,

This (I think) will be my last lot of RC equipment I'm selling due to grad school starting in a few weeks!

I may add more this afternoon...
** 36" EPP Flying Wing WITH (2) 9 gram servos and 3 motors (mild to wild) - Great flying wing all EPP foam (takes a beating!) One repair area near prop (easily hidden if you wanted to cover).

Comes with :
(2) 9 gram servos
(1) sp 280 motor/gearbox and 8x6 graupner scimitar prop
(1) SPEED 400 with adapter-NEW (in pic #2)
(1) Speed 400 with 2 props and push on adapters -NEW


(1) JETI 04 esc - tested and workes perfect - 4amps cont and 10 amps surge. Asking $20 shipped SALE PENDING


(2) Kokam 1020mah 2s1p 7.2V packs (2-cell) with JST(or micro deans)- Brand new cells! - Asking $21 each shipped!


Thats it for now! I can take Paypal (non CC preferred) or Mo

May have more later.

FYI - I'm on the good sellers list many times!

Last edited by Etonic; Jul 26, 2003 at 09:56 PM.
Sign up now
to remove ads between posts
Jul 26, 2003, 10:09 AM
Trader Rating: 148
Registered User
speed 400 Motors that go with wing
Jul 26, 2003, 10:10 AM
Trader Rating: 148
Registered User


Jul 26, 2003, 11:06 AM
Trader Rating: 137
small electrics r BIG FUN
No photos of the packs ?

Are they really 2s1p or just 2 cells in series packs ?

Are they home-made ?


Jul 26, 2003, 12:19 PM
Trader Rating: 148
Registered User
Hi Al,

There are no photo's of the packs because they are not made yet. IMHO and in my experience, I make the packs BETTER that most off-the-shelf packs. It takes me about 20 mins to make a pack and its made right. I use heat shrink strain reliefs and fill the void between the packs with hot glue to avoid shorts during an impact. I'm an engineer and pretty fussy on how I do things.....I'll include some pics of finished packs below and the new cells I have for sale in their current state. If anyone wants just the cells with a JST connector and shrinkwrap, I'll ship them as is for $18.00.


ALSO- a 2s1p pack is 2 packs in read the notation the easiest way is to think that the first 2 letter and # combo determines pack voltage (# x 3.6V) The second pair determines capacity in mah ( # x single cell capacity) --the second # also means how many sets of the first # you have-

i.e.- a 2s1p - 2 cells in series (2 x 3.6V) and its ONE set of that pair in parallel.

Confused yet!
Last edited by Etonic; Jul 26, 2003 at 12:29 PM.
Jul 26, 2003, 12:20 PM
Trader Rating: 148
Registered User
Here are some finished 2s1p packs....Also I'm showing a "y" connector I use to make 2s2p packs capable of 10A. I do not shrink the wrap all the way because I dont want all that compression around the top of the cell (one side usually has some wrinkles left- other side has velcro)
Last edited by Etonic; Jul 26, 2003 at 12:22 PM.
Jul 26, 2003, 12:42 PM
Trader Rating: 0
Registered User
I'll take your (2) 7.2 volt kokams at 21 each. Email me with your paypal info.
dan kanner
Jul 26, 2003, 12:50 PM
Trader Rating: 137
small electrics r BIG FUN

Thank you for the photos and explanation. My apologies for the "newbie to LiPo ignorance".

I'm interested in two packs as well, and a Y harness. I have a couple more dumb questions to ask so I'll send you a pm.

Thank you

Jul 26, 2003, 01:41 PM
Trader Rating: 15
Pres. Uff-Da Air

Epp Wing

Mark, I'll take your wing as described. I will send pay pal of $57 I have purchased from you before and you are on the GOOD SELLER list. Uff-Da Pete
Jul 26, 2003, 03:56 PM
Trader Rating: 102
Registered User
Etonic I will take the Jeti 04. Let me know where to send the money. I do not have PayPal. Cecil Miami, FL

Thread Tools