Thread Tools
Aug 24, 2012, 01:46 PM
Registered User
jurgen01's Avatar
Quote:
Originally Posted by Pannoch RC
I thought I would create a window seat for a camera. Now I have a window seat on each side to maximise the view.
@ Pannoch. I have a Flycam1 and planned to mount it with Velco or tape on the outside, but a window seat .... mmmh. Would you have a picture of the seat, I mean, how the camara is installed in the fuse?

@ Pulsery, I have isopropyl alcohol, I use that to thin the epoxy for laminating. I'll probably use that.

General problem: I just dont like how the wires from the motor to the ESC hang in the way behind the fan. Doesn't that harm the air flow and reduce the possible thrust? Has anyone come with an efficient way to route these cables?

Jurgen
Sign up now
to remove ads between posts
Aug 24, 2012, 03:27 PM
Registered User
jakob k's Avatar
Quote:
Originally Posted by jurgen01
Nice Panoch. That is a mod I still plan to do on my 737.
Are you using the Assan sequencer from HK?

@jakob: There seems to a general demand to receive a how-to lesson on "how to store 2 737s plus a couple of small glow planes in a Fiat Panda".
You must have a secret most of us ignore.

Jurgen
Sorry I havent replied. I will take pictures of it and upload.

Hopefully tomorrow, if weather permits.

- Jakob
Aug 24, 2012, 03:51 PM
Registered User
Quote:
Originally Posted by Future Wingz
Hi Guys,

Does Ming usually send out tracking #s? I requested one after he informed me of the shipment of my kit however, up till now, I haven't received any tracking information yet

Cheers

Vic
I did not get a tracking #. I comes USPS.
Hard to believe but my 737 was sent out on a Monday and it was here Friday.
Amazing.......
I didn't mean to stir the pot on the laquer thinner issue. As everyone can see,, I didn't try it on the jet. Just the foam it came in. SORRY GUYS.

Hoss
Aug 24, 2012, 04:39 PM
Paul B
Quote:
Originally Posted by Spyro37
Thanks Spyro!!! Another great idea!!!
When I saw your video I thought It looked brilliant!! I had to do it while the fuselage was still bare. It should create some good footage.

Thanks again Spyro!!

Hi Cocg, It should capture the flaps and spoilers. I'll take a few trial vids to see. I may need to adjust the seat!! Lol.

Hi Jurgen, I'll post a pic of the seat today. Now I will say that the airline my plane is representing is a low cost airline so the seating is basic!!

Cheers

Paul
Aug 25, 2012, 01:21 AM
Paul B
Quote:
Originally Posted by jurgen01
@ Pannoch. I have a Flycam1 and planned to mount it with Velco or tape on the outside, but a window seat .... mmmh. Would you have a picture of the seat, I mean, how the camara is installed in the fuse?

@ Pulsery, I have isopropyl alcohol, I use that to thin the epoxy for laminating. I'll probably use that.

General problem: I just dont like how the wires from the motor to the ESC hang in the way behind the fan. Doesn't that harm the air flow and reduce the possible thrust? Has anyone come with an efficient way to route these cables?

Jurgen
Here you go Jurgen,

As I said this airline is a "No Frills" airline so seating is very basic
Aug 25, 2012, 07:52 AM
Registered User
Future Wingz's Avatar
Quote:
Originally Posted by lil hoss
I did not get a tracking #. I comes USPS.
Hard to believe but my 737 was sent out on a Monday and it was here Friday.
Amazing.......
I didn't mean to stir the pot on the laquer thinner issue. As everyone can see,, I didn't try it on the jet. Just the foam it came in. SORRY GUYS.

Hoss
Thanks for your response Hoss! I'll just have to wait for it to show up

@ Hoss, Any pics of your progress so far?

Where is Smokin Joes?

Very cool video Spyro!!

Keep up the great work guys!

Cheers

Vic
Aug 25, 2012, 10:55 AM
What tree??.......Doh!!
Seahawk One's Avatar
Vic,

Am here, just waiting on stuff i ordered to arrive.

Anybody ever try 3M's polyolefin adhesion promoter? Was going to try it to see if it helps paint stick to EPO.

Neil
Aug 25, 2012, 01:44 PM
Registered User
Future wingz
Not much to take pictures of right now. Just a white uncovered foam fuse
I been a bit busy at work lately. I bought the project to keep me busy through the winter.
So I'm in no real hurry. I will cover the fuse and than I will be going with the flap mod.
But as it starts to look like a jet I will be taking pictures

Hoss
Aug 25, 2012, 02:06 PM
Registered User
gyronuts's Avatar
great thread. is there an importer in the UK? bill
Aug 25, 2012, 03:21 PM
Registered User
Quote:
Originally Posted by gyronuts
great thread. is there an importer in the UK? bill
Don't need a importer
Just go to ......http://www.windrider.com.hk/

And order one. VERY FAST SHIPPING,,, about a week

Good luck

Hoss
Aug 25, 2012, 04:58 PM
Registered User
for you guys who aren't using the winglets on the wingtips, how did you make your regular wingtips? Was the kit supposed to include them? If so, mine didn't. If not, what would you suggest?
Aug 25, 2012, 05:05 PM
6 months to finish a rtf
pulsery2k1's Avatar
they came with the model , check carefully if not PM ming
Aug 25, 2012, 05:12 PM
Registered User
i've checked twice. Can you tell me where they were packed in the box?
Aug 25, 2012, 05:20 PM
Registered User
I got mine
They aren't really that big. Check carefully

Hoss
Aug 25, 2012, 05:29 PM
Registered User
you'll all be glad to hear i found them....lol.

they were wedged into one of the nooks inside the fuselage and i hadn't spotted them.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Windrider Boeing 737 Ming Scale Kit/Scratch Built 638 Mar 10, 2016 12:41 PM
Discussion Windrider Boeing 737-700 could be a good glider Ming Slope 63 Jul 02, 2015 09:31 PM
New Product Boeing 737 philipcmf Foamy EDFs 83 Jan 16, 2011 09:03 AM
Boeing 737 jermaine Foamies (Kits) 6 Apr 08, 2002 11:21 PM