Shop our Airplanes Products Drone Products Sales
Dec 16, 2012, 02:07 AM
DroneWorlds - TEAM NEW ZEALAND
jackosmeister's Avatar
Id keep it simple to start man, direct drive inrunner, then go from there.

Light is good

Even a lil 16/25/2 on 5S with a 4.7x4.7 is fast enough to make smiles.
Sign up now
to remove ads between posts
Dec 16, 2012, 02:20 AM
The Prop is Where its At!
blitzu's Avatar
Was going to do that,but wanted a gd folder setup for a hoon plane.(dups 6x10).
Was lk'n for a in runner to pwr that,but so far it seems outrunners have the mst toqure to weight and sitting out front is

Damn that lite mini pyro at 180g!!
I may have to search the web for lowest priced one..
Last edited by blitzu; Dec 16, 2012 at 02:24 AM. Reason: had mre to say
Dec 16, 2012, 06:08 PM
Drinks Day Old Expired Milk
VooDoo Child's Avatar
Quote:
Originally Posted by blitzu View Post
Was going to do that,but wanted a gd folder setup for a hoon plane.(dups 6x10).
Was lk'n for a in runner to pwr that,but so far it seems outrunners have the mst toqure to weight and sitting out front is

Damn that lite mini pyro at 180g!!
I may have to search the web for lowest priced one..
I FINALLY got a chance to try the DUP 7X10 Folders on my Pyro today,and nothing for nothing,they are much better then the 6X10's on the Pyro....I MEAN WOW ! I am very impressed,so much so-that this will be my weekend setup unless i am looking for Max Speed.The setup in this vid from today is,Mini-Pyro,2200mah 6S,Himodel 150 ESC,7X10 DUP Folders...It pulls like a Mac Truck (watch launch),gets NICE speed (not sure how fast,but cranking) and SOUNDS CRAZY,The folders do not make much noise at all,but the echo is AWESOME,motor and esc come down warm to the touch,and the lipos get a bit of heat,but nothing like my DD and GB sets......and the glide is NICE to stretch the flight at the end....I am diggin this setup for sure,just wish i tried it sooner Crank up the volume like you were next to me,and you will hear what i mean
Swist F5D (2 min 22 sec)
Dec 16, 2012, 06:17 PM
DroneWorlds - TEAM NEW ZEALAND
jackosmeister's Avatar
Holy crap thats awesome

Watt kind of amps/volts/rpm are we talking?
Dec 16, 2012, 06:50 PM
The Prop is Where its At!
blitzu's Avatar
F#@% yea Voodoo,thats what we're talking about!! MEAN!
Dec 16, 2012, 07:05 PM
2012 NZ Speedcup - 231 MPH
DownUnderPilot's Avatar
Very nice, Doug! Great flying in those light conditions!!!!

I have some news - I'm developing a new 6.25x11 and 7x10.

Both will feature:

- thinner 'foils for lower current draw (and higher RPM hopefully)
- better hub design for improved airflow and optimised opening (100% rather than 90-95%). They will also close correctly as well.
- both will be suitable up to 5KW, maybe more if you are willing to test

The idea is you can interchange them for approx the same current draw but more thrust or more pitch speed.

The moulds will be ready early in the new year.
Dec 16, 2012, 07:06 PM
Registered User
GryphonRCU's Avatar
Voodoo,

Awesome man......that is brutal speed.

I am going to go watch it twice more....right now!!



Gryph
Dec 16, 2012, 08:38 PM
Registered User
arcticflyer's Avatar
DownUnder - put me on the list for both sets of those new folders....you know I'll "ring them out!"
Dec 17, 2012, 12:45 AM
Registered User
magrinsi's Avatar
I have order a swist 5 week ago.. But from ajamodels nothing...
Dec 17, 2012, 08:18 AM
Registered User
Quote:
Originally Posted by magrinsi View Post
I have order a swist 5 week ago.. But from ajamodels nothing...
GREETINGS....
Dec 17, 2012, 09:35 AM
Drinks Day Old Expired Milk
VooDoo Child's Avatar
Quote:
Originally Posted by jackosmeister View Post
Holy crap thats awesome

Watt kind of amps/volts/rpm are we talking?
I have no logging with this setup yet,but I do know it will shut down a YGE120,but no problem on 150,so it must be around 140amps in flight ........It just still blows my mind that I can do an all out 60 second blitz,and have enough for a couple more pulls,and land with everything warm to the touch It for sure is the perfect Sport setup.
Dec 17, 2012, 10:43 AM
Registered User
magrinsi's Avatar
Quote:
Originally Posted by harlem68 View Post
GREETINGS....
Mmhhh...
Dec 17, 2012, 12:19 PM
The Prop is Where its At!
blitzu's Avatar
Morning lads (its 6.56am here)..
Looking at escs for swist-if i use a separate little pack to pwr reciever do i have to get a opto esc? Or can i use a normal esc (with bec) and plug that into throttle channel port and then plug something like the "scorpion backup guard" into a spare channel port? So if esc burn't up or if the voltage drops below 5v,the "back up guard" automaticly takes over powering the reciever...
I've never used a separate lil'l pack on reciever before,thats why i'm asking-mite even sound like a dumb question to all those that use seperate reciever power
its new to me...
p.s. i use a futaba 7c 2.4 R617FS reciever/set
Dec 17, 2012, 12:41 PM
DroneWorlds - TEAM NEW ZEALAND
jackosmeister's Avatar
^ Just disconnect the red wire from the esc's throttle wire, when using an ESC with built in BEC. Pulling the pin out of the plug and taping it out of the way is the usual method.
Last edited by jackosmeister; Dec 17, 2012 at 12:47 PM.
Dec 17, 2012, 01:02 PM
The Prop is Where its At!
blitzu's Avatar
Yip cool,cheers Chris So if i pull the red wire,the reciever runs fulltime on the lil'l batt pack aye.Is it better to do it that way,or use esc bec to pwr reciever (combined with the scorpion backup guard) and then if voltage drops below 5v or burns up the backup guard takes over?


I spose either way the out come is the same.....if esc dies i still have reciever pwr...
cher cher for your help once again cheif
Last edited by blitzu; Dec 17, 2012 at 01:10 PM. Reason: had mre to say


Thread Tools