SIG Riser 130 rebuild - RC Groups
Thread Tools
Dec 26, 2010, 03:17 PM
planepainter's Avatar
Build Log

SIG Riser 130 rebuild

Hi guys. Well, it is that time again. A time when we can all chime in with ideas, suggestions or even bad advice. I plan to totally rework (within reason) my SIG Riser 100 into a great thermal floater Riser 130.
One suggestion I will not heed is something like "just throw it away and buy an AVA". As much as I would like to have an AVA the idea of reworking my old Riser into a bigger and (hopefully) more efficient plane somehow creates an interesting challenge.
Attached are a couple of photos. The first one shows the plane as it was completed new in Feb. of 2009 before all of the repairs it would go through teaching me the basics of rc soaring.
The second photo shows the plane last summer after having spent several weeks at the top of a huge tree before my former Army Ranger Son-in-law climbed up most of the way and barely got it down. Since then it has been hanging in my workshop torn and tattered. It just seemed to me to be an offering of selflessness (my son-in-law) and I just wanted to leave it be for a while.

But now is building season and after having done a major recent rework of my Spirit 2 meter and a new build of an OLYIII, I just want to see what can be done with this plane.

More photos will be posted soon as I have already drawn up the center section plan, cut out all of the ribs, ordered the carbon tail boom, and am starting to rework the bad wing.

So come on guys. Let's have some fun!!

Sign up now
to remove ads between posts
Dec 26, 2010, 03:50 PM
Registered User
SailplaneHawk's Avatar
I gotta say I find this idea very interesting too. I have built many a Riser 100's and have always thought about streaching the wing bigger, perhaps to 144"? I will be watching with great interest! Good luck!!!!
Dec 26, 2010, 05:23 PM
Registered User

You are.....

....a madman! But we're still waiting to see the build log- Paul
Dec 26, 2010, 06:43 PM
planepainter's Avatar
Hey Paul, maybe I should change my user name to madman!

Dec 26, 2010, 07:01 PM
Registered User
Go down to a local building plans shop, hand them your plans and tell them how much bigger you want them..... in 10 mins you'll have whatever sized Riser you it the "right thing" to do???... if your using if for yourself I'll look the other way. Cost $3.00 per page.

Dec 26, 2010, 07:25 PM
Registered User
So it sounds like all you're keeping from the original glider is the tip sections (formerly the entire wing)? Or are you keeping part of the fuselage as a "pod"? If so, you'll need to move it forward for a longer nose, or else build the tail extremely light. If you use the original tail surfaces, you'll need to make that tailboom very long.

Interesting project. Will it be like that very old axe which has had two heads and three handles?
Dec 26, 2010, 07:36 PM
Registered User
R2R's Avatar
Awesome, PP. Can't wait to watch as you dive into the details of the build. Are you planning a two piece or three piece wing?
Dec 26, 2010, 08:10 PM
planepainter's Avatar
Jolly, I will build a 30" center section using the left over ribs as a guide for the center ribs. I am only making the plane "bigger" by expanding the wing span from 100" to 130". Then I will add a carbon tail boom to get the tail feathers out there.

Lincoln, I will keep the pod the same except for cutting off the fuse aft of the trailing edge (I always thought the fuse length on the original was a bit too short anyway...), creating a tail cone and adding the boom. I most likely will not keep the original feathers but I thought they were too heavy anyway.

R2R, three piece wing.

Dec 27, 2010, 01:36 AM
Registered User
I did this to a windrifter some time ago, 100, to 130, 3 piece wing,. alittle more stab. span, increased rudder size, kept fuse the same, great flier in very low wind, can see it far away, been flying it for 15yrs. plus now//
Dec 27, 2010, 11:46 AM
Registered User
Are you going to stay with RES or adding ailerons and flaps?

Dec 27, 2010, 01:07 PM
planepainter's Avatar
Mustang, good to know I'm not as crazy as I thought.

DT56, RES.
Dec 27, 2010, 06:09 PM
who has rabbit ears down
Captain Canardly's Avatar
I have on @ my blog, if you want the original root panels to remain the same, and rework the tip- with flaps--
Dec 28, 2010, 09:30 AM
LSF 4685
Good morning PP,

Just a plea from me: Please don't change your screen name to madman. If you did, we couldn't differentiate you from the rest of us madmen.

Happy New Year to you and all who share our madness.

Dec 28, 2010, 10:49 AM
planepainter's Avatar
Thanks Dave. And the same to all of you and yours.

Dec 28, 2010, 05:41 PM
The Lone Blue Plaid Flyer
Bob Cook's Avatar
GO FOR IT !!!!!!!!!! I stretched my EZ 400 G wing by adding a 2 ft center section. I used a CF fuse and moved the tail back a foot or so. It flies great. I had to add spoilers because the darn thing wouldn't land.

Just do it.

Bob in Seattle

Quick Reply

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Question Sig Riser Airfoil modification??????? Pauliwog Thermal 46 Jan 23, 2011 08:26 AM
Sold Sig Riser 78 - NIB and still wrapped Warren Aircraft - Sailplanes (FS/W) 7 Nov 09, 2010 04:26 PM
Sold sig riser kit cbear Aircraft - Sailplanes (FS/W) 6 Oct 21, 2010 12:51 PM
Wanted SIG RISER-100 Plans old_dude Aircraft - Sailplanes (FS/W) 3 Sep 07, 2010 03:48 PM
Help! SIG RISER-100 Plans old_dude Electric Sailplanes 13 Sep 07, 2010 03:47 PM