Shop our Airplanes Products Drone Products Sales
Thread Tools
Old Sep 16, 2012, 10:46 PM
Flazo is offline
Find More Posts by Flazo
JUNK RADIO
Flazo's Avatar
I've just replaced the bearings on my motor...
very easy if you see this video....

http://www.scorpionsystem.com/buildi.../change_shaft/
Sign up now
to remove ads between posts
Old Sep 16, 2012, 10:49 PM
stgdz is offline
Find More Posts by stgdz
Volts>amps
stgdz's Avatar
Scorpion has a video of it some where


Extra got fixed tonight so that will go back up in the air this week, so glad I learned how to make airplanes from a box of sticks back in the day. Lg on the MXS on now, that's also been repaired!. Just a sanity check on my MXS. I've tried to get it straightened out regarding the thrust line and I'm not there yet. I've trimmed it out so that I've had to add a bunch of down trim to keep it flying level.

I still need to add more down thrust correct? It's about 2 more degrees from the looks of it.


oh one other thing, I got a really nice flat spin on my mxs today. Rite around 4:10
MXS harrier fail (6 min 27 sec)

Thanks LWRC for reminding me
Last edited by stgdz; Sep 16, 2012 at 11:26 PM.
Old Sep 16, 2012, 11:40 PM
Trill is offline
Find More Posts by Trill
Registered User
Trill's Avatar
Quote:
Originally Posted by flazo View Post
I've just replaced the bearings on my motor...
very easy if you see this video....

http://www.scorpionsystem.com/buildi.../change_shaft/
Thanks!
Old Sep 17, 2012, 12:11 AM
gabrielisrael is offline
Find More Posts by gabrielisrael
Got the Slickness
gabrielisrael's Avatar
What is everyones feelings about these servos:

Airtronics #94820 Digital MG Servo

vs

HiTec HS5245MG's
Old Sep 17, 2012, 08:05 AM
YellowJacketsRC is offline
Find More Posts by YellowJacketsRC
They Call him Dead!
YellowJacketsRC's Avatar
I have the ATX on my elevator and 5245's on everything else. The ATX is a better servo in torque and accuracy. It also just seems to be better quality when you watch it move so very precisely. But it is NOTICEABLY slower! It does not bother me at all on the elevator, not sure if I would be ok with it on everything else or not????
Old Sep 17, 2012, 10:40 AM
gabrielisrael is offline
Find More Posts by gabrielisrael
Got the Slickness
gabrielisrael's Avatar
Quote:
Originally Posted by Dead View Post
I have the ATX on my elevator and 5245's on everything else. The ATX is a better servo in torque and accuracy. It also just seems to be better quality when you watch it move so very precisely. But it is NOTICEABLY slower! It does not bother me at all on the elevator, not sure if I would be ok with it on everything else or not????
Thanks....

Is there a servo that will provide better speed and centering than a 5245 without breaking the bank?
Old Sep 17, 2012, 10:47 AM
Irg is offline
Irg
Find More Posts by Irg
Irg
ol' yellow eyes is back
Irg's Avatar
I just maidened the Laser. I'm completely in love. effortless to 3D, great tracking in precision, a very nice complement to the slightly wilder MXS.

well done, EF.
Old Sep 17, 2012, 10:54 AM
cwojcik is offline
Find More Posts by cwojcik
Extremely Twisted
cwojcik's Avatar
Quote:
Originally Posted by gabrielisrael View Post
Thanks....

Is there a servo that will provide better speed and centering than a 5245 without breaking the bank?
Not really. Chris Jewett has researched this a lot and figured out that your choices are to stay at 6V and use 5245's or go to the bomb-proof Airtronics servos and live with the low speed, or go to 7.4V and use 3711's or 7245's. The specs for the BLS153 are good at 6V but I am told to avoid it...not sure why? It's also extremely expensive. I am extremely happy with the 7245's but for comparison I am going to test the Futaba S9070SB on 7.4V in my MXS and see how well they work.
Old Sep 17, 2012, 11:41 AM
hone1er is offline
Find More Posts by hone1er
Team Twisted!
hone1er's Avatar
Quote:
Originally Posted by Irg View Post
I just maidened the Laser. I'm completely in love. effortless to 3D, great tracking in precision, a very nice complement to the slightly wilder MXS.

well done, EF.
I have been pleasantly surprised by the performance of each EXP i get. They all fly different but all feel so locked in for me(although some feel "locked in" in different areas than other). I'm looking forward to trying a Laser but i might have to wait for the 60'' version. Good to hear that you like the Laser, sounds like a good all around plane.



Quote:
Originally Posted by cwojcik View Post
Not really. Chris Jewett has researched this a lot and figured out that your choices are to stay at 6V and use 5245's or go to the bomb-proof Airtronics servos and live with the low speed, or go to 7.4V and use 3711's or 7245's. The specs for the BLS153 are good at 6V but I am told to avoid it...not sure why? It's also extremely expensive. I am extremely happy with the 7245's but for comparison I am going to test the Futaba S9070SB on 7.4V in my MXS and see how well they work.
Can't wait to hear what you find with the Futaba servos.
Old Sep 17, 2012, 11:58 AM
stgdz is offline
Find More Posts by stgdz
Volts>amps
stgdz's Avatar
Hone1r,


The laser is the most stable out of all the 48 exps. It just locks in. It can still go all out like the otgers but I've found I push myself lower and lower on harrier and hover with it.
Old Sep 17, 2012, 12:07 PM
3drcparts is offline
Find More Posts by 3drcparts
inverted-i-fly
3drcparts's Avatar
[QUOTE=hone1er;22756112]I have been pleasantly surprised by the performance of each EXP i get. They all fly different but all feel so locked in for me(although some feel "locked in" in different areas than other). I'm looking forward to trying a Laser but i might have to wait for the 60'' version. Good to hear that you like the Laser, sounds like a good all around plane.


if I can make it to Lodi, I'll bring my laser and you can fly it
Old Sep 17, 2012, 12:10 PM
hone1er is offline
Find More Posts by hone1er
Team Twisted!
hone1er's Avatar
That'd be awesome!! I'm going to ask for those days off today.
Old Sep 17, 2012, 12:48 PM
Doc Austin is offline
Find More Posts by Doc Austin
Team Extreme Flight
Doc Austin's Avatar
Old Sep 17, 2012, 01:29 PM
Luv3d is offline
Find More Posts by Luv3d
Honeybadger don't care...
Luv3d's Avatar
ROFL!

That is some funny stuff!
Old Sep 17, 2012, 01:59 PM
long leng is offline
Find More Posts by long leng
Quote:
Originally Posted by Doc Austin View Post
lol doc, that picture rocks!!
btw, servo in french means brain


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Cool New - Extreme Flight 60" Edge 540T EXP!!! hercdriver7777 3D Flying 13396 Today 05:30 AM
Sold Extreme Flight Extra EXP 48 RTF HKC3 Aircraft - Electric - Airplanes (FS/W) 0 Dec 15, 2010 10:47 PM
Sold 48" Edge EXP Extreme Flight, make offer crazyflyin Aircraft - Electric - Airplanes (FS/W) 9 Sep 14, 2010 07:45 AM
Sold Extreme Flight EXP Extra 48inch (Red n Black) HKC3 Aircraft - Electric - Airplanes (FS/W) 0 Sep 12, 2010 02:43 AM
Sold Extreme Flight Edge 540 EXP Rc_heli_flier Aircraft - Electric - Airplanes (FS/W) 4 Sep 01, 2010 12:51 PM