Thread Tools
Jun 19, 2012, 03:28 PM
AMF Years
7oneWo1f's Avatar
You might have trouble...which is why I ask. "not needed yet but available" might be "not needed, which is a good thing because it might not work". It did not for me, on 6s, I guess because the power supplies drop from 25.3 to 25.1 V as the current goes up, and the charger has to switch from buck mode to boost mode.
Sign up now
to remove ads between posts
Jun 19, 2012, 04:08 PM
Everything is Upgradeable.
I understand what you mean by running it hard. I would never try and run it to the maximum allowed, both charger and power supplies.
Jun 20, 2012, 03:28 AM
REVOJohn's Avatar
Quote:
Originally Posted by postalflyer72 View Post
I understand what you mean by running it hard. I would never try and run it to the maximum allowed, both charger and power supplies.
true. Most electronics coming from far east use replacement or 2nd hand components which we know does not run up to full design capacity. Also heatsinks are too small thus burning out most electronics.....so yes stay 10% below rated.
PowerLab althoug can be run at full power with full rated FETs and a killer heatsink.........1344W fullpower !!
Jun 22, 2012, 05:41 AM
Registered User
Quote:
Originally Posted by N6145k View Post
I'd skip the e-flite battery and get a gens ace 25c--a much better battery for the money in my opinion. The connectors are also better in my opinion. You'll have to modify the connector on your ESC with something like these.
Is there a paraboard I could use with the gens ace 25c or some other method for these plug types for parallel charging?
Jun 22, 2012, 08:06 AM
Registered User
Disregard above message. The Gens Ace use bullet/banana plug connections. I found compatible paraboards for these connections at EPbuddy.com.

I should be able to get a different plug connection board and use adaptors, or I can get the bullet/banana plug board, which is compatible with the ESC modified connector you listed above.

Thanks.
Jun 22, 2012, 12:16 PM
AMF Years
7oneWo1f's Avatar
No problem. I still like the GensAce connectors, but you do have to be careful to not force them to mate because you can damage the plastic. But at least you don't need a special set of pliers to take them apart, like you do with new e-flite batteries.
Jun 22, 2012, 12:27 PM
Registered User
Hi, I'm thinking of parallel charging some batteries, iv got a charger in mind which is the skyrc B6 ultimate 400W using it with a parallel charging board, or would it be better to get the skyrc quattro b6AC?
Also does the charge have to be a specific ampage, I want to charge 3-4 2s 5000mAh lipo's,
Or have you guys got any recommended chargers?

Thanks
Jun 23, 2012, 05:53 PM
Registered User
Harry H's Avatar
I have the Hyperion Super Duo 3 that I use with a couple of server power supplies. You can see in the photo it is running 34A @ 25V. It is a 1000 watt charger total, 500w per side. I have charged 8 6S batteries at the same time at 1C. - 2 6S 5800 and 2 6S 4000 on each side. If I don't want to use that many batteries, I just charge what I need at 2C. Also was fun to build

Harry

A few more photos here https://www.rcgroups.com/forums/show....php?t=1656481
Jun 23, 2012, 09:49 PM
AMF Years
7oneWo1f's Avatar
Nice looking system Harry.
Jun 23, 2012, 10:05 PM
Registered User
Harry H's Avatar
Thanks, I got worried about charging on my workbench with all the flammables around. This lets me take it to my office or bedroom and keep an eye on it.

Harry
Jul 07, 2012, 01:51 PM
Registered User
I need to buy a 3s-4s Lipo and a solid reliable charger. I have just purchased a DJI 450 Quad Kit, and since the kit doesn't provide either of those items not to mention I am fairly new to working with the more serious rc aircrafts, I wondered what some of you who are much more experienced would suggest??? ie. product and shop links if possible are greatly appreciate.
Jul 07, 2012, 03:02 PM
Molon labe
Red Scholefield's Avatar
Quote:
Originally Posted by Musictree View Post
I need to buy a 3s-4s Lipo and a solid reliable charger. I have just purchased a DJI 450 Quad Kit, and since the kit doesn't provide either of those items not to mention I am fairly new to working with the more serious rc aircrafts, I wondered what some of you who are much more experienced would suggest??? ie. product and shop links if possible are greatly appreciate.
FMA CellPro 4S Gold . Make sure you order the adapter needed to match your battery pack.

http://www.revolectrix.com/4sgold_description_tab.htm
Jul 13, 2012, 05:21 AM
REVOJohn's Avatar
Quote:
Originally Posted by Red Scholefield View Post
FMA CellPro 4S Gold . Make sure you order the adapter needed to match your battery pack.

http://www.revolectrix.com/4sgold_description_tab.htm
Or the CellPRO 4SMC too. Fully smart charger and quote autonomous
Jul 15, 2012, 09:01 AM
PEMAC
SleepySean's Avatar
Cellpro looks good. Another good entry level charger is the Accucel-6
I have an iCharger and it is fantastic, but a little more expensive.

I have used Turnigy batteries for many years and find them the best value and as good as most other brands.
Jul 16, 2012, 01:29 AM
Registered User
Quote:
Originally Posted by SleepySean View Post
Cellpro looks good. Another good entry level charger is the Accucel-6
I have an iCharger and it is fantastic, but a little more expensive.

I have used Turnigy batteries for many years and find them the best value and as good as most other brands.
Can the Accucel-6 give resistor reading for the packs? Is it important?


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Check list before you buy an EDF!! bighead93 Foamy EDFs 599 Nov 27, 2016 05:52 PM
Sold If you are in need of GOOD servos, LOOK HERE! flyinjrc74 Aircraft - General - Radio Equipment (FS/W) 7 Nov 12, 2010 07:49 AM
Discussion first fpv flights here - look here for beginer flights crashes and more nasty stuff! captaingeek Aerial Photography 4 Nov 01, 2010 05:15 PM
For Sale Are you looking for a trainer!? LOOK NO FURTHER! Alpha 60 Ecibob Aircraft - Fuel - Airplanes (FS/W) 8 Oct 15, 2010 07:23 AM
Link look here if you are looking for some 1/2 engines cmulder 1/2A Planes 3 Nov 19, 2008 10:09 PM