PLD 10~150mA 1S lipo charger with USB (PLD-LICH-150) - RC Groups
Thread Tools
Dec 14, 2010, 02:44 AM
Magicsmoke maker
Inflexo's Avatar
New Product

PLD 10~150mA 1S lipo charger with USB (PLD-LICH-150)

Hi there everyone,

This is actually more of a 'stub' thread to let everyone know about a new product that's been developed here in RCGroups by myself with the sponsorship of other RCG patrons.

I've created for production a tiny 1x1" single cell lipo charger that'll go down as low as 10mA and up to 150mA, selectable using an easy-as-pie rotary selector (no more 4-way bit patterns to remember!)

To make it even easier I've also added a USB socket so that you can power it from pretty much anywhere. You can also power it using a 2S lipo if you use the alternative solder pads.

It'll even recover cells that have dropped a bit below 3V using a proper trickle-start charge** (recommended only if you know what you're doing!)

For the full discussion and a lot of photos - we're over at the indoor section;

Discussion thread -

Available at -

Sign up now
to remove ads between posts

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
New Product Single cell micro lipo charger 10mA~150mA (PLD-LICH-150) Inflexo Scratchbuilt Indoor and Micro Models 98 Dec 27, 2010 10:33 PM
Sold eflite 3.7v 1s 120mah lipo's tenergy 3.7v 1s 130mah lipo's nitrodude71 Aircraft - Electric - Batteries & Chargers (FS/W) 2 Nov 17, 2010 01:05 PM
Wanted Looking for Thunder Power TP103CQ 1S LiPo Charger serasbach Aircraft - Electric - Batteries & Chargers (FS/W) 0 Nov 14, 2010 06:20 PM
Question USB wall/car charger for typical 1S lipo tru-rc Batteries and Chargers 0 May 06, 2010 05:45 PM
Sold 1s parkzone 3.7v 1s charger with five 1s lipo packs hacker002 Aircraft - Electric - Micro & Indoor Airplanes (FS/W) 5 Dec 11, 2009 04:56 PM