Show us your plane (Part 3) - Page 176 - RC Groups
Thread Tools
Feb 03, 2013, 06:56 AM
Registered User
Hasi's Avatar
Quote:
Originally Posted by E1Allen
Go to my YouTube channel, e11Allen. I believe one of the videos I explain what I used on that wing. If that doesn't work, shoot me a pm and I can help.

Eric
Thanks, I've found it. So it's a kit, I thought it was scratch built.
Sign up now
to remove ads between posts
Feb 03, 2013, 11:31 AM
UH60 Pilot
E1Allen's Avatar
Yeah, it's a kit, but they last forever almost. They take a real good beating and keep on going
Feb 03, 2013, 03:05 PM
aoq
aoq
Registered User
Skywalker 1880

Desert FPV Arieal (5 min 55 sec)


FPV Sunset & Flamingo (14 min 35 sec)


Vtx Immersion 5.8Ghz 600mw
Fatshark Predator
GoPro Hero 2
Ezuhf
Ezosd
2 x 5000 Nano Tech 4s







Feb 06, 2013, 08:22 PM
Aerial Operator
Got about 25 flights on my penguin and have her all tuned up and flying great, decided to clean her up a bit while I wait for my DL firmware update.

Did a little touch up painting using Plast-Dip neon orange and black (works great and is super durable).

Added my 3rd failsafe, GPS Tracker to find my bird if something happens during a long range flight. I have RTH, DVR recording, and GPS Tracker.

I also lined the inside of my hero 2 case with aluminum tape that is grounded to cut down on any RF noise. Also every servo wire I use is braided and ran throughout the fuselage with servo wire clips (I can't stand the rat nest that end up happening in the fuselage), my vtx cable is shielded and grounded, and I place the VTX on the tail boom to keep away from other electronics.

Overall this is the best flying FPV plane i have ever flown, and I really am impressed with how stable the video is, when i review HD video after flight it looks like it is a still shot because it's so stable.

Hope you guys enjoy my build.

Cheers,
Feb 07, 2013, 09:20 AM
Registered User
Almost ready. Waiting for good weather
Last edited by Qnzkrew; Feb 07, 2013 at 11:38 AM.
Feb 07, 2013, 10:29 AM
Mobius Cables... I got em'
chanyote66's Avatar
Quote:
Originally Posted by Qnzkrew
Almost ready. Waiting for good weather
its coming your way... weather was perfect yesterday here in TN... Nice build!
Feb 07, 2013, 10:32 AM
Mobius Cables... I got em'
chanyote66's Avatar
Quote:
Originally Posted by swartzracing
Did a little touch up painting using Plast-Dip neon orange and black (works great and is super durable).
Where did you get the orange plast-dip?
Feb 07, 2013, 11:41 AM
Registered User

Cloverleaf and 2.4 tx will counter balance with telemetry tx on other wing


Cloverleaf thanks to ibcrazy
Feb 07, 2013, 12:44 PM
Aerial Operator
Quote:
Originally Posted by chanyote66
Where did you get the orange plast-dip?

I think Home Depot carries it, but I just ordered it from eBay.
Feb 07, 2013, 01:15 PM
Mobius Cables... I got em'
chanyote66's Avatar
Quote:
Originally Posted by swartzracing
I think Home Depot carries it, but I just ordered it from eBay.
ya, ill check online... home depot only has black...
Feb 07, 2013, 02:22 PM
Aerial Operator
Quote:
Originally Posted by chanyote66
ya, ill check online... home depot only has black...
Ebay is where you will find blaze orange. It is really bright orange too, during the day it literally looks like its glowing its so bright. Highly recommended for flying.

Cheers,
Feb 10, 2013, 10:36 AM
USA: LakeGeorge, New York
2013 Carbon Boom SkyWalker 1900mm.
9 F degrees flight
Last edited by rclab1; Feb 25, 2013 at 07:17 PM.
Feb 10, 2013, 11:28 PM
cheapskate extroardinairé
well, I wanted a good all-rounder that can fpv, slope, thermal, and just putz around the local park. finally decided on one of these: http://www.hobbyking.com/hobbycity/s...dProduct=26992
1800mm wingspan, fiberglass fuse, built up wings, ailerons and a v-tail, may add flaps later. hoping to do some fpv lift hunting around the ridges above my house.
Feb 11, 2013, 12:24 AM
Mobius Cables... I got em'
chanyote66's Avatar
Heres my newest FPV rig... It is being completed now but this was the maiden. Just had to test before loading all the cameras and FPV gear.
Its getting a 1500mw 1280mhz VTX, DOSD, and a Pixim. Then a Sony AS10 and RD32II for HD recording.

Tested 706 Watts on 4S with 10x6 prop
Roughly 5.5lbs AUW (need a bigger scale)

ELEMENT Xe Maiden Flight - Flown With DragonLink (0 min 0 sec)
Feb 11, 2013, 02:54 AM
Crashaffinity on youtube
CrashAffinity's Avatar
sexy SSS visible from far away


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Show Us your US Navy Ship ! Chophop Life, The Universe, and Politics 98 Nov 02, 2017 01:03 PM
Gallery Show us your plane! (Part 2) skunkworks2006 FPV Aircraft 2585 Dec 09, 2010 12:04 PM
Discussion Show us your fleet. lovegroove FPV Talk 3 Sep 28, 2010 02:42 PM
Gallery Show us your workshop or man cave! TopSecretBoats Racing Boats - Internal Combustion 10 Sep 25, 2010 01:08 PM
Discussion Show Us Your Clumpy Grass Chophop Electric Plane Talk 11 Sep 24, 2010 11:15 PM