Mini Flash Speed Wing Build and Fly - Page 2 - RC Groups
Thread Tools
Aug 03, 2003, 10:29 PM
Registered User
hopsterguy's Avatar
My speedwing video for those that might not have seen it...

http://members.cox.net/smjohnri/miniflashspeedwing3.wmv
Sign up now
to remove ads between posts
Aug 04, 2003, 12:56 AM
Tight is Right
Darren Hintze's Avatar
Mine still isn't finished, but it is getting covered. I've had a few insanities eat up some time so I've been away from building projects.

Any extra time has been spent flying.

I have to spend next weekend at home (doing LASIK Thursday) and my eyes will probably be too light sensitive to fly, so this weekend I should get her done.

Melf
Jul 07, 2012, 02:35 PM
M0unt@in M0del$ minion
turbojoe's Avatar
Hey, let's drag up a REALLY old thread! Not much out there about the Mini Flash speed wings. Can't believe it's almost 9 years since I've flown mine. I was talked into selling the Mini Flash with the 3D wings many years ago but I kept the speed wings. I bought a fuse kit a few years ago and just decided to build it. As is typical for MM kits it took no time at all to build. I'll be going old school with a Himax 2015-4100 geared inrunner with as yet undecided gearing.

I'm spending much more time trying to decide on covering than I did building. The wings are transparent red and black and are in perfect condition. I'd hate to strip and recover them. Gotta figure out a color scheme for the fuse that will complement them. I don't have any more of the transparent red though. I don't plan to buy any either. I've been wanting to use some silver and black but it may not go well with the red. I'll figure something out sometime. It's too freaking hot here to fly so I've got plenty of time. When it finally cools down a bit I'll have 4 maidens to do. Looking forward to this little hot rod again. When I finally decide on the covering I'll post some pictures.

Joe
Jul 07, 2012, 02:59 PM
Zak
Zak
Serial plane killer
Subscribed!

I have a MiniFlash in the bag that I bought a few years ago, but when I received it the canopy was crushed so I lost the motivation to build it.

Can't wait to see yours!
Aug 08, 2012, 03:28 PM
M0unt@in M0del$ minion
turbojoe's Avatar
Well she's finally done. Not sure what is up with my camera. I can't get it to take a decent picture since my grandson got his hands on it.

The covering scheme is not very inventive but my schemes never are.
The Himax 2015-4100 geared inrunner is working out well, it always did in the past. 10.5 amps draw and 128 watts output with the 5.3:1 gearing and an APC 10x5E prop. At 15.6 ounces AUW with 3S1300mah Li-Po I'm sure performance will be "sparkling"!

It's 115 degrees outside right now at just past noon. I don't plan to do a maiden or any flying of anything until it cools off some. Probably sometime in September..........

Joe


Thread Tools