Shop our Airplanes Products Drone Products Sales
Thread Tools
Dec 12, 2012, 12:31 AM
Registered User
Quote:
Originally Posted by SPEED-E-FLYER
Exactly
Ordered 3 - 6000kv motors/ EDF from Don, Mounted and Balanced.

Going to order 1/2 dozen 40c packs for my Christmas
Any recommendation?
Larry
i have been using nanotech 3s 1300 45c packs with my wemo/6k setup.
they have been holding up ok so far. keep in mind though i have only been doing short burst of WOT passes as it is installed in a SCREAMER and it covers ground very quickly.
Sign up now
to remove ads between posts
Dec 12, 2012, 10:42 AM
Balsa to the Wall
Chuck's Avatar
Got the T-45 today. Arrived in good shape and pretty quickly, from China.
It's sure a cute lil' bugger.

Guess I'll put it together tomorrow, going flying today.


Chuck
Dec 12, 2012, 11:32 AM
INDORUS EXPARAMINTO
SPEED-E-FLYER's Avatar
Was just concerned about the room for the pack.
I know some people use 4S pack but it sounded like they had to shoehorn them in.
I thought any 3S pack would have more room and therefor bit larger mAh batteries.

Larry
Dec 12, 2012, 11:37 AM
chuck
Quote:
Originally Posted by SPEED-E-FLYER
Exactly
Ordered 3 - 6000kv motors/ EDF from Don, Mounted and Balanced.

Going to order 1/2 dozen 40c packs for my Christmas
Any recommendation?
Larry
well lets start by saying that i fly my jets like jets , i dont dally around on the edge of stall trying to see how long of a flight i can get.

so..... that being said , i have yet to find a 1300 that will put up w/ the kind of current needed to run that setup . i have come to the conclusion that 20 c continuous is all u can expect out of 40c rated batteries. and even that is pushing it on these smaller batteries .

so ... u can fly like an old lady, cook some batteries, or go up in battery size . i have used 1600's but wfo must still be used in burst only.

as don recommends , an 1800 or larger is whats needed. yrmv

chuck.
Dec 12, 2012, 12:46 PM
INDORUS EXPARAMINTO
SPEED-E-FLYER's Avatar
Sage words Brother Chuck.
Ditto about the 1300's and Who ya calling an Old Lady?

I don't have any instruction on any of these planes
and would love to see pictures of your packs and location
to see what will fit and still balance

Thanks
Larry
Dec 12, 2012, 12:48 PM
Registered User
Joe 1320's Avatar
I had good luck with an 1800 maH 40C lipo fitting in many of the battery trays for the Wemo 6000 kV setup, certainly well within the discharge rating of the lipo.
Dec 12, 2012, 01:03 PM
Registered User
gooniac33's Avatar
I have some new batteries showing up form China Hobby.... I have used the 3s 40c 1600mah and they are perfect thus far! Have some 4s 40c 1800's and 1000's showing too. I am sure they will be just as good. Gotta have at least 20-30 cycles before I say good or bad though....But the first couple cycles have been great!!
Dec 12, 2012, 01:24 PM
INDORUS EXPARAMINTO
SPEED-E-FLYER's Avatar
Thanks Brother
Will be looking for a 12/12/12 battery sale next.

Larry
Dec 12, 2012, 05:12 PM
Registered User
presa1200's Avatar
Hi guys i'm very new in edf jet ,I recently received a gift it is kit 50mm EDF F16 F18 f35 skyangel with stock motor and esc,
can anyone please help me to choice the best batteries for the this three EDF jet,
I want a setup that good for CG , just to make it fly and not for speed,
please give mAh and c battery for 3s or 4s

TQ in advance and sorry for my bad english
Dec 12, 2012, 06:14 PM
Augermeister
dahawk47's Avatar
I have the stock T-45, stock F-16 and new Katana with the Don's 4800kv setup.

All I can say is that you fit just about anything in the T-45 whereas the compartment space in the f-16 is pretty tight. Went with Hyperian G3 on that one. The 4800kv Katana requires 4S. 30C discharge is nice. Even with more milliamps, the flight times are going to be in the 4min max range.

Good luck . These are fun planes !

-Hawk
Dec 12, 2012, 08:26 PM
I'd rather be flying
baddb1's Avatar
Quote:
Originally Posted by presa1200
Hi guys i'm very new in edf jet ,I recently received a gift it is kit 50mm EDF F16 F18 f35 skyangel with stock motor and esc,
can anyone please help me to choice the best batteries for the this three EDF jet,
I want a setup that good for CG , just to make it fly and not for speed,
please give mAh and c battery for 3s or 4s

TQ in advance and sorry for my bad english
I use a 3S 900maH Lipo in my F16. It fits nice and CG is good.
Dec 12, 2012, 09:20 PM
www.hobbyb.com's Avatar
Hi,

Just want to let you guys know that 10% discount is offered for any purchase valued USD100 or above. Coupon code: merrychristmas

Thank you for your time.
Dec 13, 2012, 01:06 AM
Registered User
presa1200's Avatar
Quote:
Originally Posted by baddb1
I use a 3S 900maH Lipo in my F16. It fits nice and CG is good.
thank you very much baddb1 ,
1 down 2 to go
Dec 13, 2012, 01:33 AM
Registered User

F-16 cg


Quote:
Originally Posted by baddb1
I use a 3S 900maH Lipo in my F16. It fits nice and CG is good.
+1 - don't forget to put the lipo in the rear of the cockpit area, then you'll be fine with 3 cells 850mA to 1000mA
Dec 13, 2012, 01:41 AM
Registered User
I just ordered a red arrow arf from toysonics $60 shipped..just needs esc and 3 servos to complete which i have plenty of...It shows landing gear in pictures i did'nt think these 50mm edf's had gear...anyone here know if gear comes with or not? thx
Last edited by hate2crash; Dec 13, 2012 at 02:28 AM.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Adelaide & SA flying & chat #2 Zootster Australia 24010 Jun 25, 2017 09:32 PM
Help! Where can I buy Genkem Nova 27 in SA? MegaTesla South Africa 2 May 14, 2011 03:25 PM
Discussion SAL-SA Glider in Gobi dune romanticus Slope 11 Nov 30, 2010 10:40 PM
Question SA 2010-02 Castle ICE 100 "failed cut off" ?? LandCruiser Castle Creations 2 Oct 19, 2010 11:07 PM
T-33 Spring-air minis HW609 Derrek Curtis Electric Ducted Fan Jet Talk 3 Apr 25, 2001 03:42 PM