Thread Tools
Dec 01, 2010, 01:12 PM
Oleg Golovidov
olgol's Avatar
Thread OP
New Product


I just received a shipment of Akcent-2s from Dmitriy Lomovtsev of in Russia.
The first Akcent-2 in the USA had been flown by Gavin Trussell this season and his general opinion was rather positive. Akcent-2 survived Gavin's launches and the normal abuse that Gavin gives all his models I think it also took out a couple other models in midairs with little damage to itself The people who saw the model and (few) that tried to fly it also had good feedback about it. The model performs quite well for the cost. The wing is molded with a foam core inside, fiberglass skins (2 layers of light glass) and now also has a carbon grid under the skin (disser). Having a foam core inside a molded wing is good from the durability point of view. The damage is easier to repair, very much like on a vac. bagged wing. The tail feathers are also molded with a foam core inside and light glass skins. The quality is B+ with a few cosmetic defects here and there, and the model looks very attractive in your hands and in the air. I am planning to build one for myself for test flying and I will post my build pics here, unless somebody else beats me to it

The component weights are: wings 125-127g, fuselages 45-47g, tail sets 16-17g. The wing is attached with 2 (two) M4 bolts. The stab mount is of very clever design, very light about 1.6-1.7g. The model does not come with any pushrods (I can supply pushrods at cost). You are supposed to use pull-spring setup for the tails. I have a building manual in Russian that I will translate and post here later.

Please see the pics below. I have received 8 full quality models (1...8), plus 3 second quality models (9...11) with various defects (small skin delams in front of the spar, fuselage weak spots). Model #9 also has a heavier wing due to an imbedded carbon sock in the ailerons. Model #1 is already taken. I will also leave one model for myself, whichever one is left last I guess.

Price is $450 for full quality models, $320 for second quality ones. Shipping $40 from me to you.

If anybody is interested in getting one, you can post your reply here with the number of the model you want to let others know it is taken, and/or send me an e-mail ([email protected]). Payment by check is preferred, or PayPal as a personal gift to avoid the 3% fee.

Ask your questions here or via e-mail!

Last edited by olgol; Apr 03, 2011 at 03:57 PM.
Sign up now
to remove ads between posts
Dec 01, 2010, 01:37 PM
Registered User
They look really nice and really like the idea of molded solid core wings!

Dec 01, 2010, 01:48 PM
Barney Fife, Vigilante
tom43004's Avatar
I had a chance to stick this a bit early in the season (just after the Bruce) and it flew very well. The quality of these looks like it's come up a notch since then as well.

Good stuff.
Dec 01, 2010, 01:59 PM
Oleg Golovidov
olgol's Avatar
Thread OP
Tom, James, thanks for you kind comments!

Two models are taken already: #1 and #3.
Dec 01, 2010, 03:01 PM
Come out swinging
sporter's Avatar
The website shows the Akcent as a pod/boom model. Your images show the model fuse as 1-pc, I guess it's 1-pc.

Do you have any info on the wing sections? Gavin, can you chime in with a flight report?

Dec 01, 2010, 03:04 PM
Oleg Golovidov
olgol's Avatar
Thread OP
Sean, you were looking at Akcent pictures, not Akcent-2.
The sketch says airfoils are based on AG series, that's all I know. Dmitriy does not disclose the airfoils.
Dec 01, 2010, 07:46 PM
Team Horizon Pilot :)
Mine was a little heavy.(MY FAULT)it was by far the highest launching plane i have had until tragedy. flew great .was a faster plane and had legs. great for the price and wing is bulletproof.Looks like they upgraded the tails. Definitely well worth the money and dam the new ones are sexy.
Latest blog entry: cr
Dec 02, 2010, 01:21 AM
Registered User
Svede's Avatar
Dec 02, 2010, 07:46 AM
But I am learning
I_Can't_Fly's Avatar
I know where number one is headed

Brian P.
Dec 02, 2010, 09:05 AM
Ryan Gonsoulin
Ryans Rebel's Avatar
Any ballast system with this one?
Dec 02, 2010, 10:07 AM
Oleg Golovidov
olgol's Avatar
Thread OP
No ballast system. The best way to do ballast in narrow fuselages like this is with a "skewer". The ballast weights (fishing weights) are threaded onto a music wire (0.032" or so) and the wire has a small loop at the end which engages into a hole near the canopy opening. Works really well. FW 5 I think shows it in their instructions. I will try to find pics.

Models 1, 3, 7 are taken. Thanks for the interest, guys!
Dec 02, 2010, 12:35 PM
Aeromodeller by heart!
RubSon's Avatar
Hi Folks.

I flew an Akcent 2 at the German Open this year.
Crashed my secondary plane less than one week before the competition.
Recived the Akcent 2 monday (It was ordered a monthe before), started building allmost at the doorstep. Finished the plane tuesday evening and went to germany wednesday.
Test flew thursday and used in competition the same afternoon.
(I even think there is a picture of my model here on rc-groups, taken in germany by Oleg!)

Only thin to say is: "Huge value for the bucks"

The fuse is really great, and strong...

Dec 02, 2010, 01:02 PM
Oleg Golovidov
olgol's Avatar
Thread OP

Ballast on a skewer

Here are pics of "ballast on a skewer". I think this is the most convenient ballast system for these narrow molded fuselages. There must be enough space though behind the servos to insert the ballast, the servos must be forward enough from the rear canopy edge.

Dec 02, 2010, 02:04 PM
Registered User
Frans Bal's Avatar

Twister 1 ballast system

Hi, some pictures of the ballast system in a Twister 1.
Dec 02, 2010, 03:17 PM
Registered User
Originally Posted by olgol
Here are pics of "ballast on a skewer". I think this is the most convenient ballast system for these narrow molded fuselages. There must be enough space though behind the servos to insert the ballast, the servos must be forward enough from the rear canopy edge.

I was thinking of doing something like this in one of my DLG's. Other than the retaining wire, do you just let the ballast "float" in the fuse? If using pull/spring, I would think it would be best to have a tube that the skewar inserts into so it doesn't get caught up on the string...


Quick Reply

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Sold Hitec Eclipse 7 2TX, 2 spectra, 5 xtals, 2 8-chan RX, charger ebay now ncostes Aircraft - General - Radio Equipment (FS/W) 5 May 14, 2011 09:58 PM
Discussion 2801 Pro 2.2 vs 2.3 firmware potato42 Micro Helis 5 Nov 12, 2010 10:24 AM
For Sale NIB Hacker B40-7L (2) w/ Jeti/Hacker 70 amp ESCs (2) jwhanson1 Aircraft - Electric - Power Systems (FS/W) 0 Nov 02, 2010 10:49 AM
For Sale Akcent DLG *PRICE REDUCED* Brendan Miller Aircraft - Sailplanes (FS/W) 1 Oct 15, 2010 08:33 PM
For Sale Akcent DLG Brendan Miller Aircraft - Sailplanes (FS/W) 2 Sep 16, 2010 02:07 PM