Stevens AeroModel Shaft 400 for RealFlight - RC Groups
Shop our Airplanes Products Drone Products Sales
Thread Tools
Nov 29, 2010, 04:38 PM
Pronounced "High Duck"
haiduk's Avatar

Stevens AeroModel Shaft 400 for RealFlight

I spent the time modeling the Shaft 400 for RealFlight G4.5.

Wing Span (in.) 39
Wing Area (sq. in.) 340
Length (in.) 35
Flying Weight (oz.) 15
Loading (oz. / sq. ft.) 6.4
Wing Cube Loading 4.1

This is one of my absolute favorite park sized planes. I chose to keep mine light and used a "370 class" outrunner with a 1000mah 3S lipo. I used a Turnigy 2826-1650kv with an APC 8x4e prop for about 150watts. I wouldn't recommend using more than 200watts with this plane. 150 is more than enough. I highly recommend this kit.

Some Links:
Article Review
StevensAero - SHAFT (400)
Template for custom color schemes
Shaft 400 for RealFlight G4.5 or better
Last edited by haiduk; Nov 29, 2010 at 04:43 PM.
Sign up now
to remove ads between posts
Nov 30, 2010, 08:35 AM
aka KF7DS
Thanks...this will be a great addition to my Realflight fleet.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Sold NIB Stevens AeroModel Shaft 400 w/motor - $65 shipped. richord Aircraft - Electric - Airplanes (FS/W) 6 Jun 26, 2009 10:19 PM
Discussion My Stevens AeroModel Shaft 400 RIP... Big Fran Parkflyers 15 Oct 14, 2008 01:18 PM
Article Stevens Aeromodel 39" SHAFT (Super High-performance Aerobatic Flight Trainer) 400 BEC Parkflyers 31 May 02, 2008 10:09 AM