Thread Tools
Old Nov 27, 2010, 11:08 AM
nadine is offline
Find More Posts by nadine
vtol fan
nadine's Avatar
Question

tutorial how to winding the motors


Hi!
i want to start to winding my self some brushless and i d'ont know how to winding ,what is the best way etc...is some link to read about it!???
Sign up now
to remove ads between posts
Old Nov 27, 2010, 11:31 AM
whitecrest is offline
Find More Posts by whitecrest
Frequent Flyer
whitecrest's Avatar
Try this site:
http://www.gobrushless.com/store/cgi-bin/cp-app.cgi

They have basic kits and tutorials. Look under the "Tools" section.
Old Nov 27, 2010, 11:50 AM
flydiver is offline
Find More Posts by flydiver
Registered User
flydiver's Avatar
+1 on gobrushless. You will need wire anyway and they are a good site for info. Easier to start with an ABC wind than a dLRK. If you don't know what that means start with a simple gobrushless kit.
Old Nov 27, 2010, 10:10 PM
jackerbes is offline
Find More Posts by jackerbes
Jack
jackerbes's Avatar
Reading through the GB Knowledge Base is a great way to get a grip on the fundamentals. It will probably seem a little bewildering at first but that is normal I think.

Here is a link to the instructions for winding a motor that used to be available as a kit, the Komodo KH-247. It had a 12 arm stators and could be wound with 14 magnets and that is a common configuration for motors now. It will show you the parts and process pretty clearly.

http://www.micronradiocontrol.co.uk/...o/KH-257-2.pdf

When you get to the point where you have a motor in hand and are ready to rewind it, search this forum for that motor's model name and you may find some good info for the wind. Or post the make and model info here and someone can give links for some of the tutorials for various motor rewinds that are already here.

Jack
Old Nov 28, 2010, 01:09 AM
nadine is offline
Find More Posts by nadine
vtol fan
nadine's Avatar
thanks all! yes ,first i will buy from micron uk one komodo kit,because i am allready his client !!!
regards
Last edited by nadine; Nov 28, 2010 at 01:14 AM.
Old Nov 28, 2010, 01:13 AM
nadine is offline
Find More Posts by nadine
vtol fan
nadine's Avatar
Quote:
Originally Posted by whitecrest View Post
Try this site:
http://www.gobrushless.com/store/cgi-bin/cp-app.cgi

They have basic kits and tutorials. Look under the "Tools" section.
wow...
thanks verry interested,it's what i looking for!!!
regards
Old Nov 28, 2010, 08:26 AM
jackerbes is offline
Find More Posts by jackerbes
Jack
jackerbes's Avatar
Quote:
Originally Posted by nadine View Post
thanks all! yes ,first i will buy from micron uk one komodo kit,because i am allready his client !!!
regards
I thought I had heard that those were not available any more. That does look like a nice way to get started though. If you can find any of the CD-ROM style motors like the Tower Pro 24xx they are good motors to start with. Some will have 9 arm stators and some will have 12 arm stators, the number of magnets will vary from one to the other, but all of them are good candidates for getting started.

If you know any fliers that have motors that are broken or burned out maybe you can get one of those to start with.

Good luck with it!

Jack


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion How do you figure out the wattage of motors? GreenAce92 Electric Motor Design and Construction 17 Nov 17, 2010 11:54 PM
tutorial explaining brushless motors? wolff2000 Electric Plane Talk 3 Jul 08, 2005 04:46 PM