Thread Tools
Old May 16, 2011, 04:31 PM
powerlines is offline
Find More Posts by powerlines
I am ready for HHAEFI!!
powerlines's Avatar
Quote:
Originally Posted by TG43 View Post
I guess no one knows the answer to this!???????????
Looks to be 1.25" I have the long arms from hyperion.. I like them.. Strong and cheap!!!

But I have mine set to 1.25" and can go longer.. I got 45% up and down that is fine with me.!! Rudder will hit the ele if I want it to!!
Sign up now
to remove ads between posts
Old May 16, 2011, 04:42 PM
Irg is online now
Irg
Find More Posts by Irg
Irg
ol' yellow eyes is back
Irg's Avatar
Quote:
Originally Posted by Balsa Breaker View Post
I cant wait to see this landing on the canopy. Were is it?
http://www.youtube.com/watch?v=ISOiSY4XqUQ
Old May 16, 2011, 05:04 PM
Ducati Mechanic is online now
Find More Posts by Ducati Mechanic
Some.. call him Tim...
Ducati Mechanic's Avatar
Quote:
Originally Posted by Irg View Post
It took it surprisingly well... very minor damage. It pulled the rudder hinges out(fast fix), scuffed the spinner, Canopy, Sfg and broke a prop.. I miss my old grass runway!

The top of the canopy got the worst of it, but due to the tint it's not very noticeable.. Half hour on the build table, and she looks like new...
Last edited by Ducati Mechanic; May 16, 2011 at 05:09 PM.
Old May 16, 2011, 05:11 PM
powerlines is offline
Find More Posts by powerlines
I am ready for HHAEFI!!
powerlines's Avatar
Dang.. I would have NEVEr done that!!!! HEHEEHE!!! !!! I am sure MAtt will chime in on this!!!
Old May 16, 2011, 05:44 PM
Manta1 is offline
Find More Posts by Manta1
OOPS
Manta1's Avatar
Quote:
Originally Posted by powerlines View Post
Dang.. I would have NEVEr done that!!!! HEHEEHE!!! !!! I am sure MAtt will chime in on this!!!
lol hmmm nope you wouldnt because Tims didnt break in half..you break em in half lololo
Old May 16, 2011, 08:56 PM
powerlines is offline
Find More Posts by powerlines
I am ready for HHAEFI!!
powerlines's Avatar
I was waiting for you to chime in..
Old May 16, 2011, 08:58 PM
Manta1 is offline
Find More Posts by Manta1
OOPS
Manta1's Avatar
you called me in here.?
Old May 16, 2011, 09:00 PM
powerlines is offline
Find More Posts by powerlines
I am ready for HHAEFI!!
powerlines's Avatar
No. I just know you snooping around!!
Old May 16, 2011, 09:09 PM
Manta1 is offline
Find More Posts by Manta1
OOPS
Manta1's Avatar
Quote:
Originally Posted by powerlines View Post
Dang.. I would have NEVEr done that!!!! HEHEEHE!!! !!! I am sure MAtt will chime in on this!!!
^^^
you maiden that plane yet?
Old May 16, 2011, 09:20 PM
powerlines is offline
Find More Posts by powerlines
I am ready for HHAEFI!!
powerlines's Avatar
Cause I need a Life pack or a GOOD Air Boss ESC!@!!
Old May 16, 2011, 10:44 PM
Chuck is offline
Find More Posts by Chuck
Balsa to the Wall
Chuck's Avatar
OK, here is something I discovered during the build, using HS225's and DuBro arms, the rudder servo arm was binding on the shoulder of the ball link connector at full deflection. I sanded the shoulder of the connector some and added a washer between the ball and the servo arm to correct it.

Chuck
Old May 17, 2011, 02:34 AM
rcflip is offline
Find More Posts by rcflip
Suspenders Account
Mine is 5.5lbs with a Turnigy 3.3 25c lipo and 5.6lbs with a Turnigy 4.0 25c nano.
Old May 17, 2011, 02:35 AM
rcflip is offline
Find More Posts by rcflip
Suspenders Account
Quote:
Originally Posted by Chuck View Post
OK, here is something I discovered during the build, using HS225's and DuBro arms, the rudder servo arm was binding on the shoulder of the ball link connector at full deflection. I sanded the shoulder of the connector some and added a washer between the ball and the servo arm to correct it.

Chuck
I had the same problem but I used a dubro ball spacer from one of the ball link kits, smooth as my bald head now!!
Old May 17, 2011, 07:19 AM
Darkman17 is offline
Find More Posts by Darkman17
Registered User
Darkman17's Avatar
Quote:
Originally Posted by Chuck View Post
OK, here is something I discovered during the build, using HS225's and DuBro arms, the rudder servo arm was binding on the shoulder of the ball link connector at full deflection. I sanded the shoulder of the connector some and added a washer between the ball and the servo arm to correct it.

Chuck
Yes I had the same problem with the alerions. shimmed with a small washer!
Old May 17, 2011, 01:57 PM
Manta1 is offline
Find More Posts by Manta1
OOPS
Manta1's Avatar
Quote:
Originally Posted by powerlines View Post
Cause I need a Life pack or a GOOD Air Boss ESC!@!!
ride out this evening well snatch the esc off my vyper you can use it to maiden..i know its driving you nuts.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
New Product Extreme Flight 48" Edge 540T EXP! hemituda 3D Flying 12588 Nov 23, 2016 03:08 PM
Wanted Extreme Flight 48" Edge 540T EXP FD Pilot Aircraft - Electric - Airplanes (FS/W) 7 Jul 02, 2010 12:52 PM
Discussion Daniel Holman puts the new Extreme Flight EDGE 540T EXP through the wringer! EXTREME FLIGHT 3D Flying 21 May 30, 2010 02:17 AM
Discussion 42" AJ Slick or 48" Extreme Flight Edge 540T-EXP LeeJ 3D Flying 13 Mar 26, 2010 09:26 PM