New - Extreme Flight 60" Edge 540T EXP!!! - Page 512 - RC Groups
Shop our Airplanes Products Drone Products Sales
Thread Tools
Feb 08, 2013, 07:41 AM
Registered User
mbritt's Avatar
Quote:
Originally Posted by Ohio AV8TOR
Anyone use a metal screw with a bonded washer for their wing bolts? I use this on my 87" gas plane and the neoprene on the bonded washer prevents it from loosening. It is so much faster to install with a ball driver than the thumb screw.
Where did you get these?
Sign up now
to remove ads between posts
Feb 08, 2013, 08:12 AM
Registered User
Ohio AV8TOR's Avatar
Quote:
Originally Posted by mbritt
Where did you get these?
Loses and Home Depot carry these in the screw section drawers.
Feb 08, 2013, 08:23 AM
Registered User
Just flew 2 batteries on fiala 16x 8 and my edge got a new life in it! If on vess 16x6 even ti get a decent KE i needed a load of throttle than now only around 50% vess was stupid power but too slow but fiala is SICK power and plenty fast! Its around 78A and nearly 1700w! (well 166-something but you get the point) add a couple watts and there will be people flying 71"slick on less!
Feb 08, 2013, 09:34 AM
Got the Slickness
gabrielisrael's Avatar
Quote:
Originally Posted by rimaarts
Just flew 2 batteries on fiala 16x 8 and my edge got a new life in it! If on vess 16x6 even ti get a decent KE i needed a load of throttle than now only around 50% vess was stupid power but too slow but fiala is SICK power and plenty fast! Its around 78A and nearly 1700w! (well 166-something but you get the point) add a couple watts and there will be people flying 71"slick on less!
Does anybody in the US handle fiala props?
Feb 08, 2013, 09:42 AM
Registered User
Im not in usa... And amps could vary depending on batts, your altitude...and fiala pulls less amps because its like 15.5 not 16"...


sheeeesh! im happy that you guys talked me into going higher than 16x6 propeller!

ooh... and btw i finally figured how i can assingn all control surface rates to a single switch on my dx8!
Last edited by rimaarts; Feb 08, 2013 at 11:33 AM.
Feb 08, 2013, 12:47 PM
Registered User
Ohio AV8TOR's Avatar
So I am confused are you saying the fiala prop that says its a 16" prop really only measures 15"?
Last edited by Ohio AV8TOR; Feb 08, 2013 at 01:23 PM.
Feb 08, 2013, 12:56 PM
Registered User
i was actually also surprised about that... i just noticed that it looks just a tad taller than my aeronaut 15x8, just out of curiosity i put it besides vess 16x6, and it turned out to be just a tad shorter. after i dug up my ruler, and turned out that fiala was 15.5" not 16" long... (anyways im much happier with fiala than i was with my vess) so its just curious fact... if any of you also having a fiala could measure it, would be interesting to see...
Feb 10, 2013, 02:49 AM
WrongRudderR/C
FlattyFlier's Avatar
I just ordered mine!

I'm going nitro. Saito 100. Anyone else done the conversion?
Feb 10, 2013, 03:02 AM
Registered User
one guy here on rcg went gas on mxs... he said all is well, just tail didnt really stand up to vibration....
Feb 10, 2013, 03:25 AM
WrongRudderR/C
FlattyFlier's Avatar
I wanted gas but there are no 12-18cc engines to my knowledge besides the converted Saito's which still just run and sound like a Saito only at twice the price.

A dle20 would be too heavy in comparison to the 1.00fs. 6oz heavier I think. Not to mention all the extra ply and epoxy needed to reinforce the firewall.

It shouldn't take much to redo the firewall for the nitro. The Saito has new bearings and runs smoothly with little vibration.

I'm just not an E guy and can't afford anything bigger right now so this is it!
Feb 10, 2013, 03:53 AM
Yin & Yang
Liberty10's Avatar
Actually there is a gas engine in that size

RCG 15cc Gas engine w/ CD-Ignition 2.1HP/1.54kw
Feb 10, 2013, 07:33 AM
Registered User
Quote:
Originally Posted by Mchone, Jake
I just ordered mine!

I'm going nitro. Saito 100. Anyone else done the conversion?
Yeah, Jake. Welcome to the club, I'm expecting video's. Are you getting this to tide you over till you get your bigun?
Feb 10, 2013, 08:43 AM
Registered User
Ohio AV8TOR's Avatar
Saitos are pretty smooth so you may not have vibration issues. I will be curious to hear of your results and hopefully see some videos.
Feb 10, 2013, 09:24 AM
WrongRudderR/C
FlattyFlier's Avatar
Quote:
Originally Posted by jetinteriorguy
Yeah, Jake. Welcome to the club, I'm expecting video's. Are you getting this to tide you over till you get your bigun?

Well this if going to be my fatty but instead of my biggun I'm going REAL biggun!

I just baught into a 1979 C152A

Ill be getting vids of both
Feb 10, 2013, 11:15 AM
Сделайте Америку Великой Снова
7oneWo1f's Avatar
Quote:
Originally Posted by Liberty10
Actually there is a gas engine in that size

RCG 15cc Gas engine w/ CD-Ignition 2.1HP/1.54kw
Nice find. There are 8 in stock at this link. Aside from a customer service complaint, the reviews are generally good. I wonder if anybody put it on a 3D plane. One guy has a 15x8 prop, so it might do well.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
New Product Extreme Flight 48" Edge 540T EXP! hemituda 3D Flying 12824 Nov 15, 2017 12:41 PM
Wanted Extreme Flight 48" Edge 540T EXP FD Pilot Aircraft - Electric - Airplanes (FS/W) 7 Jul 02, 2010 12:52 PM
Discussion Daniel Holman puts the new Extreme Flight EDGE 540T EXP through the wringer! EXTREME FLIGHT 3D Flying 21 May 30, 2010 02:17 AM
Discussion 42" AJ Slick or 48" Extreme Flight Edge 540T-EXP LeeJ 3D Flying 13 Mar 26, 2010 09:26 PM