Jun 07, 2012, 09:13 AM
Let the hating begin
evalith8's Avatar
Quote:
Originally Posted by Aeroplayin View Post
I have seen enough amazing things from the 60 inch EXPs on HV servos to seriously consider them, specifically the JR 3711. The Hitec 7245 seem to match up well to the JR 3711 specs on paper as far as HV alternatives and are $20 cheaper -- Tower discount will make them even less expensive -- for those that still have a place in their heart for Hitec.
I have 985's & 7955's that have held up well,the 7955's get beat to death & still survived
Sign up now
to remove ads between posts
Jun 07, 2012, 10:34 AM
Registered User
Aeroplayin's Avatar
Yeah, but it was the earlier 79xx series that were the root of the problem covered on a 290 page FG thread that got pretty nasty, but there was a firmware update, I'm told, with no reconciliation.
Jun 07, 2012, 03:02 PM
Quote:
Originally Posted by mbritt View Post
Ya but the Futaba would be good for other applications in the future as well. Also no chance for blow back on the Futaba or on the ATX as they both have 90oz of torque @6v
have you tried the futaba s9070 already?
i have a set on the way.

the sav÷x sh1250 did disapoint me a lot....no power at high speed.
Jun 07, 2012, 04:15 PM
Registered User
Aeroplayin's Avatar
Quote:
Originally Posted by long leng View Post
have you tried the futaba s9070 already?
i have a set on the way.

the sav÷x sh1250 did disapoint me a lot....no power at high speed.
A little wide, but the specs look really good with all the voltage options you could ask for.

These, and the JR 3711 are going to be head and shoulders above the non-HV digitals though, so it's tough to compare. Futaba guys will go here and the JR's guys will go to the 3711's.
Jun 07, 2012, 04:44 PM
thats right....and i am more the futaba guy.
making the slot a little wider will be the smallest problem.

basicly i think you wont come around using hv servos for the edge/extra in case you want best performance. all others are either a little weak or slow or heavier (bls551)
Jun 07, 2012, 09:00 PM
Registered User
TG43's Avatar
I have 7245's in my Extra. They are pretty bad ass. I wanted just one plane with "the best of the best", but I don't know if they're really worth an extra $170 to me. I was planning on getting an Edge and outfitting it with cheapy servos like 225MG's and a 5245 on elevator. That's what my friend has in his Edge and it seems to fly really well. HV's are pretty dang cool though.
Jun 07, 2012, 11:00 PM
Registered User
Has anyone used the Hitec 7245s on 6 volts? or do the they need more voltage to make them work?
Jun 08, 2012, 06:19 AM
Registered User
mbritt's Avatar
Quote:
Originally Posted by long leng View Post
have you tried the futaba s9070 already?
i have a set on the way.

the sav÷x sh1250 did disapoint me a lot....no power at high speed.
A friend of mine has them and they are very nice servos
Jun 08, 2012, 06:22 AM
Registered User
mbritt's Avatar
Quote:
Originally Posted by Aeroplayin View Post
A little wide, but the specs look really good with all the voltage options you could ask for.

These, and the JR 3711 are going to be head and shoulders above the non-HV digitals though, so it's tough to compare. Futaba guys will go here and the JR's guys will go to the 3711's.
So far except for the speed of the servos which really doesn't detract from them the ATX 94820 servos are really great servos for the price. Im currently building a new RWB 60" and will run the Futaba servos. I took Hercs advise and got some of the ATX servos and I have to agree I think they are pretty bullet proof for this plane.
Jun 08, 2012, 06:23 AM
Registered User
mbritt's Avatar
Quote:
Originally Posted by Aeroplayin View Post
I have seen enough amazing things from the 60 inch EXPs on HV servos to seriously consider them, specifically the JR 3711. The Hitec 7245 seem to match up well to the JR 3711 specs on paper as far as HV alternatives and are $20 cheaper -- Tower discount will make them even less expensive -- for those that still have a place in their heart for Hitec.
No more love for Hitec here
Jun 08, 2012, 07:20 AM
doh!
ryan_m's Avatar
Quote:
Originally Posted by raptor50h View Post
Has anyone used the Hitec 7245s on 6 volts? or do the they need more voltage to make them work?
6v is fine, the specs on 6v are still respectable, more torque than a 225/5245 and not bad speed. They of course get better with higher voltage, but even 6v isn't bad.
Jun 08, 2012, 07:38 AM
Registered User
kellyzo6's Avatar
Quote:
Originally Posted by mbritt View Post
So far except for the speed of the servos which really doesn't detract from them the ATX 94820 servos are really great servos for the price. Im currently building a new RWB 60" and will run the Futaba servos. I took Hercs advise and got some of the ATX servos and I have to agree I think they are pretty bullet proof for this plane.
Can you post a link where you got your servos and are you using a separate BEC? I am still learning
Jun 08, 2012, 04:27 PM
Planes & Falconry my passions
Feliperc's Avatar
Ec5!!!!!
Jun 08, 2012, 04:47 PM
Altitude is my friend...
Depronicus's Avatar
Quote:
Originally Posted by TG43 View Post
...outfitting it with cheapy servos...
Has anybody around here tried these? :

Solar D658

4.4 kg/cm, metal gear, dual ball bearing, digital, coreless motor, .08 seconds, 26 grams, all for $12.35???

Seems way too good to possibly be true...
Jun 08, 2012, 06:32 PM
Honeybadger don't care...
Luv3d's Avatar
old adage....we get what we pay for...


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
New Product Extreme Flight 48" Edge 540T EXP! hemituda 3D Flying 12638 Yesterday 07:05 PM
Wanted Extreme Flight 48" Edge 540T EXP FD Pilot Aircraft - Electric - Airplanes (FS/W) 7 Jul 02, 2010 11:52 AM
Discussion Daniel Holman puts the new Extreme Flight EDGE 540T EXP through the wringer! EXTREME FLIGHT 3D Flying 21 May 30, 2010 01:17 AM
Discussion 42" AJ Slick or 48" Extreme Flight Edge 540T-EXP LeeJ 3D Flying 13 Mar 26, 2010 08:26 PM