Shop our Airplanes Products Drone Products Sales
Thread Tools
May 19, 2012, 05:33 AM
Lets break some props :D
joseico90's Avatar
this one..
http://www.hobbyking.com/hobbyking/s...dProduct=17205

I hope that with a Frsky TX module this radio sticks input response will be faster, compared with my Futaba T6EX the servo response is much slower and I don't like that.

Hopefully it will, after all it seems the TX and RX side of things on the original aren't very good anyway..correct me if I'm wrong.
Sign up now
to remove ads between posts
May 19, 2012, 11:25 AM
Registered User
wheelspinner20's Avatar
Quote:
this radio sticks input response will be faster,
I dont' remember ever reading of a delay issue, and I don't think the specs on the latency for this system are any different than any other 2.4 spread spectrum systems. Is it possible you may have had rx or servo issues??
May 19, 2012, 01:54 PM
Registered Loser
Ouch! Small mistake hits me in the pocket book

I was coding the new product page for the upcoming Rev 2.2 board and a tiny SQL mistake led me to insert the price into the wrong product page. Some gentleman in Japan just got a hulluva deal! He bought my $479.99 smart car cruise control for 45 bucks. Yikes.

I just wanted to share this in case my pain provides some amusement!

- Steven
May 19, 2012, 09:57 PM
Firefox
Firefox675's Avatar
Ordered the "9x Add-on Board with built-in Programmer and EL Backlight" from SmartieParts a short time back, it arrived about 7 days later, wish HobbyKing could do that, reasonably. But as it arrived in the middle of the week the conversion was put off until this afternoon, it was raining anyway.

Followed the instructions on the web site, downloaded the drivers and installed though I'm not sure I needed them as I was using a laptop running Vista.

Everything went together as it should have ( I guess it did anyway as this was my first installation of one of these kits).

Plugged in the mini USB cable and the radio came on. Started eepe and a message came up saying there was a new er9x version available, r762 I think it was, so I downloaded in and flashed it without any problems. Now waiting on a link to download the manual for the new er9x program.

A note, mostly concerning the er9x program, when it says to "press any button to continue" it is not referring to a button on the remote to your TV/DVD/CD or MP3 player, but a button on the radio it's self. I tried the others.

Also I feel the first message that appears on the screen after a successful flashing should say "get yourself a beer".

All went good here.

Thanks SmartieParts
May 20, 2012, 05:38 PM
Row 0, Seat A
G550Ted's Avatar
Quote:
Originally Posted by s_mack
Ouch! Small mistake hits me in the pocket book

I was coding the new product page for the upcoming Rev 2.2 board and a tiny SQL mistake led me to insert the price into the wrong product page. Some gentleman in Japan just got a hulluva deal! He bought my $479.99 smart car cruise control for 45 bucks. Yikes.

I just wanted to share this in case my pain provides some amusement!

- Steven
Steven,

I'm not amused by your pain but want to give you a pat on the back for once again standing behind your products and for your outstanding service.

I have purchased a programming card for both of my radios and will certainly consider your upcoming version as well. I would like to remind everyone of the problems I encountered with the delivery of the boards I bought from you. Not a problem with you, rather their destruction of one and damage to the other by Canada Post/USPS when in transit. Although it was beyond your control you promptly replaced the destroyed board and dealt with (or ate) the postal problem. I believe most vendors would have had me try to make a claim with all of the attendant BS and bureaucratic headaches.

I don't own a Smart car, just a couple of 9x radios so there is not a lot I can buy from you. Regardless, I have and will continue to recommend your products to everyone I can because of their quality and your service.

Thank you again for your great support!

Ted
May 20, 2012, 09:37 PM
Registered Loser
Hey, thanks for the kind words Ted!

I am a demanding consumer myself. So I've always tried to handle things with my customers the way I'd expect them to be handled if I were in their shoes. You're right that what happened to your package wasn't my fault, but it *certainly* wasn't your fault. You put your good money in my hands and expect me to deliver a good product in return. Its my personal policy that I MUST make that happen.

Same thing with this gentleman in Japan. Do I WANT to send him a cruise control at a loss? No, of course not. And I have to admit I briefly considered refunding him his money and playing the "not responsible for typographical errors" card that some might... but then I reminded myself that if I were in Wal-mart, for example, and I took a product up to the checkout with my cash in hand ready to purchase and it comes up higher than advertised... that I expect to get that product at the marked price. The customer bought the product from me in good faith... its only right that I deliver.

Thanks for the pat on the back, but really its just the way it should be, no? I personally think we should all expect that behavior from all businesses. You know... just be fair.

- Steven
May 21, 2012, 08:45 AM
Lets break some props :D
joseico90's Avatar
Quote:
Originally Posted by wheelspinner20
I dont' remember ever reading of a delay issue, and I don't think the specs on the latency for this system are any different than any other 2.4 spread spectrum systems. Is it possible you may have had rx or servo issues??
mmm don't think so, I just see that compared with my Futaba, the stock 9x is slower, smooth as it may be..but slower to deliver (fast to my liking) responses to the servos.

I mean, I'm realistic as to be aware I'm dealing with a 60.00 radio..

Anyway, I'm hoping that after all the mods I'll be better if not... I know I wont be happy as I need fast response for my flying style and planes, but I do hope..
May 21, 2012, 08:53 AM
Lets break some props :D
joseico90's Avatar
Quote:
Originally Posted by s_mack
Hey, thanks for the kind words Ted!

I am a demanding consumer myself. So I've always tried to handle things with my customers the way I'd expect them to be handled if I were in their shoes. You're right that what happened to your package wasn't my fault, but it *certainly* wasn't your fault. You put your good money in my hands and expect me to deliver a good product in return. Its my personal policy that I MUST make that happen.

Same thing with this gentleman in Japan. Do I WANT to send him a cruise control at a loss? No, of course not. And I have to admit I briefly considered refunding him his money and playing the "not responsible for typographical errors" card that some might... but then I reminded myself that if I were in Wal-mart, for example, and I took a product up to the checkout with my cash in hand ready to purchase and it comes up higher than advertised... that I expect to get that product at the marked price. The customer bought the product from me in good faith... its only right that I deliver.

Thanks for the pat on the back, but really its just the way it should be, no? I personally think we should all expect that behavior from all businesses. You know... just be fair.

- Steven
I must congratulate you Steven, as a business person myself I favor and admire this kind of business approach, quite rare these days.

"We reap what we sow" ......so expect a good harvest!

Well done.
May 21, 2012, 05:02 PM
Yet another flying K1W1
41south's Avatar
Quote:
Originally Posted by s_mack
Hey, thanks for the kind words Ted!

I am a demanding consumer myself. So I've always tried to handle things with my customers the way I'd expect them to be handled if I were in their shoes. You're right that what happened to your package wasn't my fault, but it *certainly* wasn't your fault. You put your good money in my hands and expect me to deliver a good product in return. Its my personal policy that I MUST make that happen.

Same thing with this gentleman in Japan. Do I WANT to send him a cruise control at a loss? No, of course not. And I have to admit I briefly considered refunding him his money and playing the "not responsible for typographical errors" card that some might... but then I reminded myself that if I were in Wal-mart, for example, and I took a product up to the checkout with my cash in hand ready to purchase and it comes up higher than advertised... that I expect to get that product at the marked price. The customer bought the product from me in good faith... its only right that I deliver.

Thanks for the pat on the back, but really its just the way it should be, no? I personally think we should all expect that behavior from all businesses. You know... just be fair.

- Steven
That is some of the best customer service around and I'll certainly be buying from you! Well done.
May 23, 2012, 03:47 PM
Registered User

Compatibility of Companion 9x and EEProm er9x


I set up a model using Companion 9x and saved it to xx.eepe. EEPROM could not load it. Got an error message saying EEPROM needed to be updated. Companion 9x can upload models saved by EEPROM but not vice versa. I am afraid to download to Tx using Companion 9x. Any thoughts?
May 23, 2012, 04:27 PM
Registered User
scott page's Avatar
Quote:
Originally Posted by hamerson
I set up a model using Companion 9x and saved it to xx.eepe. EEPROM could not load it. Got an error message saying EEPROM needed to be updated. Companion 9x can upload models saved by EEPROM but not vice versa. I am afraid to download to Tx using Companion 9x. Any thoughts?
yes
Latest blog entry: Old OpenTX and Taranis Videos
May 24, 2012, 07:57 AM
Registered User
OK, Scott. What am I missing? I thought they were compatible--as well as companionable.
Thanks.
Last edited by hamerson; May 24, 2012 at 09:20 AM. Reason: adding thanks
May 24, 2012, 09:21 AM
Registered User
reacher10's Avatar
Quote:
Originally Posted by hamerson
I set up a model using Companion 9x and saved it to xx.eepe. EEPROM could not load it. Got an error message saying EEPROM needed to be updated. Companion 9x can upload models saved by EEPROM but not vice versa. I am afraid to download to Tx using Companion 9x. Any thoughts?
Here is the subject forum dedicated to C9X...those guy's are pretty on top of it. Ask them and I'm sure you'll get it working.

http://9xforums.com/forum/viewforum....e8ed5c7a49bf22
May 25, 2012, 09:31 AM
Lets break some props :D
joseico90's Avatar
All went fine with the board and flashing, piece of cake with this kit.

Now, I've seen some use a 2s LiPo, so what min voltage alarm should I set for this radio with such a battery?
May 25, 2012, 11:20 AM
Registered User
reacher10's Avatar
Quote:
Originally Posted by joseico90
All went fine with the board and flashing, piece of cake with this kit.

Now, I've seen some use a 2s LiPo, so what min voltage alarm should I set for this radio with such a battery?
Your beyond the scope of this thread now that you've flashed your radio.

There is a lot of discussion on this topic.

I suggest you do some reading in these area's.

http://9xforums.com/forum/viewforum.php?f=4

https://www.rcgroups.com/forums/show...=1266162&pp=50

You are gonna love this transmitter!


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Download RCDeskpilot Add-on Planes In Post #1 UPDATED MARCH 7 2011 Wilfor Simulators 207 Nov 27, 2015 12:21 AM
Sold RealFlight G3.5 With Controller and Vol. 3 Add-On Rob02Aggie Aircraft - General - Miscellaneous (FS/W) 3 Nov 13, 2010 02:13 PM
Question Searching RC Car with transmitter having the pots NOT soldered directly on the board Nase Electric Power Cars 0 Nov 07, 2010 08:46 AM
Discussion Built-in-Balancer: Replace a 14.4 nihm pack with 5S LiFE leveraging original charger? coreyfro DIY Electronics 0 Nov 05, 2010 09:33 AM