New Products Flash Sale
Thread Tools
Old Mar 06, 2011, 08:33 AM
GrootWitBaas is offline
Find More Posts by GrootWitBaas
I don't speak German ....Yet !
GrootWitBaas's Avatar
If I understand your questions correctly then yes and yes.
The back light can be turned on and off from inside the flashed firmware (by switch or time or any way you want almost)
Updating and flashing firmware can be done from windows linux or mac osx
Sign up now
to remove ads between posts
Old Mar 06, 2011, 04:04 PM
manunele is offline
Find More Posts by manunele
Registered User
Quote:
Originally Posted by GrootWitBaas View Post
If I understand your questions correctly then yes and yes.
The back light can be turned on and off from inside the flashed firmware (by switch or time or any way you want almost)
Updating and flashing firmware can be done from windows linux or mac osx
But the program works for PC 64-bit or 32 bit?
and The back light can be turned on and off from inside the flashed firmware,can do with this product :http://www.smartieparts.com/shop/ind...oducts_id=331?
Old Mar 06, 2011, 04:11 PM
GrootWitBaas is offline
Find More Posts by GrootWitBaas
I don't speak German ....Yet !
GrootWitBaas's Avatar
yes that's the one you want it works, I am fairly sure it works with both 32 and 64, and believe there is even a signed driver for Vista now but I use OSX so I leave it to the windowzzzz users to confirm this
Old Mar 06, 2011, 04:21 PM
manunele is offline
Find More Posts by manunele
Registered User
Quote:
Originally Posted by GrootWitBaas View Post
yes that's the one you want it works, I am fairly sure it works with both 32 and 64, and believe there is even a signed driver for Vista now but I use OSX so I leave it to the windowzzzz users to confirm this
but I mean the programmer. The programmer provided by smartieparts works with Windows XP?
Old Mar 06, 2011, 04:35 PM
s_mack is offline
Find More Posts by s_mack
Registered Loser
Yes. I am SmartieParts. It works on XP no problem.
Old Mar 08, 2011, 02:38 AM
pavn is offline
Find More Posts by pavn
Registered User
pavn's Avatar
When do you think you will send next supply? I ordered "9x Add-on Board with built-in Programmer and EL Backlight" on Fabruary 24.
Old Mar 08, 2011, 08:13 AM
manunele is offline
Find More Posts by manunele
Registered User
in comments during checkout I put: Not Declared over $ 26. it appears in the package?
how do I tell him how to declare in the package?
Old Mar 08, 2011, 10:39 AM
s_mack is offline
Find More Posts by s_mack
Registered Loser
Quote:
Originally Posted by pavn View Post
When do you think you will send next supply? I ordered "9x Add-on Board with built-in Programmer and EL Backlight" on Fabruary 24.
I sold out just before that. I think you were one of the first to miss the last batch They are coming, but the switchover from hand-soldering to machine-soldering took some extra time. I expect to ship them out mid to late April. If you don't want to wait, you can either contact me (reply to your order confirmation email so I know your order number) to cancel your order... or actually today I just found one board that got missed, but I'm missing a part for the EL so it would be a programmer-only (or you have to do a little work). Again, contact me if you want that one.

- Steven


Quote:
Originally Posted by manunele View Post
in comments during checkout I put: Not Declared over $ 26. it appears in the package?
how do I tell him how to declare in the package?
Don't worry about it
Old Mar 08, 2011, 11:47 AM
pavn is offline
Find More Posts by pavn
Registered User
pavn's Avatar
I would need also Backlight.

Quote:
(or you have to do a little work).
Do not understand exactly.
Old Mar 08, 2011, 11:49 AM
s_mack is offline
Find More Posts by s_mack
Registered Loser
Since it only applies to one person (and you asked first)... I'll continue this discussion by PM. Give me a few minutes.

- Steven

[edit: pm sent]
Last edited by s_mack; Mar 08, 2011 at 11:54 AM.
Old Mar 08, 2011, 12:17 PM
manunele is offline
Find More Posts by manunele
Registered User
Don't worry about it [/QUOTE]

could you explain to me how it will end the story?
if you want in a private pm..
Old Mar 08, 2011, 12:31 PM
s_mack is offline
Find More Posts by s_mack
Registered Loser
Quote:
Originally Posted by manunele View Post
could you explain to me how it will end the story?
if you want in a private pm..
I get so many such requests, I just put $10 on each one.
Old Mar 10, 2011, 07:58 PM
titeuf007 is offline
Find More Posts by titeuf007
Registered User
does it plug and play board too?
http://www.fpv4ever.com/lang-en/turn...ur-radio-.html
could i have a pictures when this board is assembled pleaseee
Old Mar 10, 2011, 10:33 PM
crucial is offline
Find More Posts by crucial
Registered User
crucial's Avatar
No it's not plug and play. It requires soldering.

https://www.rcgroups.com/forums/atta...mentid=3767762

Here is an example of my installation
Old Mar 14, 2011, 11:41 PM
grumman5277 is offline
Find More Posts by grumman5277
Registered User
grumman5277's Avatar
s mack,
Purchased my stand alone Sun.Looking forward to finally getting a back-light on my Eclipse7.Thanks in advance,
Jeremy


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Download RCDeskpilot Add-on Planes In Post #1 UPDATED MARCH 7 2011 Wilfor Simulators 207 Nov 27, 2015 01:21 AM
Sold RealFlight G3.5 With Controller and Vol. 3 Add-On Rob02Aggie Aircraft - General - Miscellaneous (FS/W) 3 Nov 13, 2010 03:13 PM
Question Searching RC Car with transmitter having the pots NOT soldered directly on the board Nase Electric Power Cars 0 Nov 07, 2010 09:46 AM
Discussion Built-in-Balancer: Replace a 14.4 nihm pack with 5S LiFE leveraging original charger? coreyfro DIY Electronics 0 Nov 05, 2010 10:33 AM